Micro-Energy Division capacitors (XH-HG) contain flammable organic solvents. For your safety, please follow the following prohibitions.
♦Do not charge by high current or high voltage.
Doing so may generate gas inside the capacitor, resulting in swelling, catching fire, heat generation or bursting.
♦Do not reverse placement of (+) and (-)
SII capacitors have polarity. If the (+) and (-) side of the capacitor is reverse inserted, it may cause a short-circuiting or over discharge of the capacitor on some equipment and it may induce overheating, explosion or fire.
♦Do not solder directly to the capacitor
If soldering is performed directly to the capacitor, the capacitor is heated up, consequently cause leakage, explosion or fire due to overheating from internal short-circuiting.
♦Keep capacitors out of children's reach.
If leaked liquid is ingested or a capacitor is swallowed, consult a physician immediately.
♦Do not heat, disassemble nor dispose of in fire
Doing so damages the insulation materials and may cause catching fire, heat generation, leakage or bursting.
♦Do not discharge by force
If the capacitor is discharged by direct connection to an external power supply etc., voltage of the capacitor will decline lower than 0 volts (electrical reversal) and will cause the capacitor case to expand, overheat, leak, explode or burn.
♦In case of leakage or a strange smell, keep away from fi re to prevent ignition of any leaked electrolyte.
♦If leaked liquid gets in the eyes, wash them with clean water and consult a physician immediately.
♦Do not use nor leave the capacitors in direct sunlight nor in high-temperature areas.
It may cause catching fire, heat generation, leakage or bursting.
♦Do not use new and used capacitors together. Do not use different types of capacitors together.
It may cause catching fire, heat generation, leakage or bursting.
♦If you connect two or more capacitors in series or parallel, please consult us in advance.
It may cause bursting or catching fire due unbalanced load or voltage.
♦Keep capacitors away from direct sunlight, high temperature and humidity.
It may cause heat generation or performance deterioration.
