CAPC Series - Compact and battery operated, high speed thermal printer.

Model		CAPC235	CAPC245
Printing	Method	Thermal line dot printing
	Number of dots /line	288	384
	Resolution(dots/mm)	6	8
	Paper width(mm)	58
	Printing width(mm)	48
	Speed(mm/sec)max	60	65
	Paper path	Curved
Detection	Head temperature	By thermistor
	Platen position	By mechanical switch
	Out of Paper	By photo interrupter
	Cutter home position	By mechanical switch
Power supply(V)	Operation voltage(Vdd)	4.75 to 5.25
Power supply(V)	Operation voltage(Vp)	5.0 to 8.0
Peak current(A)	Head	4.6 (8V / 144 dots)	4.3 (8V / 96 dots)
	Motor	0.82(8V)
	Cutter	2.2
Auto Cutter	Method	Slide type
	Paper thickness (μm)	54 to 80 ^*1
	Cutting type	Partial cut(Right side single edge point remained)
	Operating time(sec/cycle)max	1
	Cutting pitch(mm)min	10
	Cut frequency(cut/min)max	30
Service life	Pulse activation(pulse)	50 million	100 million
	Abrasion resistance(km)	50
	Life(cut)	500,000
Operating temperature(°C)		0 to 50
Dimensions(W x D x H mm)		71.1 x 88.6 x 29.0^*2
Mass(g)		Approx. 220
1 Use recommended thermal papers 2 Excluding protrusion

Model	PT800P01
Thermal printer	CAPC235	CAPC245
Package form	80pin QFP
Operating voltage(V)	Vp:5.0 to 8.0, Vcc:4.5 to 5.5
Operating frequency(MHz)	5+/-0.5%
Configuration	C-MOS LSI
Communication interface	Parallel, Serial
Character type	Extended graphics character set Other characters are available with CGs^*1 or external ROM
Character matrix(H x W dots)	16 dots characters : 16 X 8, 16 X 16 24 dots characters : 24 X 12, 24 X 24
Dimensions(W x D x H mm)	17.2 x 17.2 x 1.7
*1 CG ROM: Japanese, Korean