 |
|
|
|
 |
- Max printing speed: 62.5mm/sec
- Compact and light-weight
- Paper feed knob model available
- Straight and curved path models available
- Operating temperature: -30°C to 70°C
     |
|
| Model |
LTP1245 |
| Printing |
Method |
Thermal line dot printing |
| Number of dots/line |
384 |
| Resolution(dots/mm) |
8 |
| Paper width(mm) |
58 |
| Printing width(mm) |
48 |
| Speed(mm/sec)max |
62.5 |
| Paper path |
Curved / Straight |
| Detection |
Head temperature |
By thermistor |
| Head-up detection |
By photo interrupter |
| Out of Paper |
By photo interrupter |
| Power supply(V) |
Operation voltage(Vdd) |
4.5 to 5.5 |
| Operation voltage(Vp) |
4.2 to 8.5 |
| Peak current(A) |
Head |
2.7 (8.5V / 64 dots) |
| Motor |
0.46 |
| Service life |
Pulse activation(pulse) |
100million |
| Abrasion resistance (km) |
50*1 |
| Operating temperature (°C) |
-30 to 70 |
| Dimensions(W x D x H mm) |
72.0 X 39.5 X 16.0 *2 |
| Mass(g) |
Approx.45 |
| *1 Use recommended thermal papers *2Excluding protrusion |
Interface
| Model |
IF1101-01B |
IF1101-01BK |
| CPU |
PT110P01 |
| Operating voltage(V) |
Vp:4.2 to 8.5, Vcc: 4.5 to 5.5 |
| Character matrix(HXW dots) |
16dots characters: 16X8,16X16
24dots characters: 24X12,24X24
|
| Character type |
Optional font |
Yes |
Yes |
| Downloaded character |
Yes |
Yes |
| User-defined character |
Yes |
Yes |
| Extend graphics character set |
Yes |
Yes |
| Katakana character set |
No |
Yes |
| JIS 1&2 level kanji |
No |
Yes |
| Communication interface |
Parallel, Serial(C-MOS) |
| Dimensions(W x D x H mm) |
70.0 X 100.0 X 11.6 |
CPU
| Model |
PT110P01 |
PT120P02 |
| Package form |
128pin QFP |
80pin QFP |
| Operating voltage(V) |
Vp:4.2 to 8.5, Vcc: 4.5 to 5.5 |
| Operating frequency(MHz) |
18.43 +/-0.5% |
5 +/- 0.5% |
| Configuration |
C-MOS LSI |
| Communication interface |
Parallel, Serial |
| Character type |
Extended graphics character set,
Other characters is available
with CGs*1 or external RAM |
| Character matrix(H x W dots) |
16dots characters: 16X8,16X16
24dots characters: 24X12,24X24
|
| Dimensions(W x D x H mm) |
22.0 X 16.0 X 3.1 |
17.2 X 17.2 X 1.7 |
|
*1 CG ROM: Japanese, Korean
|
Auto Cutter
| Model |
ACU6205A |
ACU6205B |
| Cutting |
Method |
Circular type |
| Paper width(mm) |
58 |
| Paper thickness (μm) |
54 to 75*1 |
| Cutting type |
Full cut |
Partial cut
(Leave right side edge) |
| Operating time(sec/cycle)max |
0.6(operating voltage 6.0V,25°C) |
| Cutting pitch(mm)min |
10 |
| Cut frequency(cut/min)max |
30 |
Operating
voltage(V) |
Motor |
4.2 to 6.0 |
| Detector(control switch) |
4.5 to 5.5 |
| Starting current (A) |
1.0(5V on) |
| Life (cut) |
300,000 |
| Dimensions(W x D x H mm) |
81.9 X 54.0 X 12.0 |
| Mass(g) |
Approx.50 (without support plate) |
| *1 Use recommended thermal papers |
|
 |
|
|
|
 |
|
|
|
| Copyright © Seiko Instruments Inc.
, All Rights Reserved. |
|
|
|
|
|
|
|
|
