 |
|
|
|
 |
-
Max printing speed: 250mm/sec
- Compact 2", 3" heavy-duty mechanism
- Support thick paper: up to 155μm *1
(straight path model only)
- Operation temperature: -20°C to 60°C
- Various drivers
   |
 |
| Model |
CAP9247 |
CAP9347 |
| Printing |
Method |
Thermal line dot printing |
| Number of dots/line |
448 |
640 |
| Resolution(dots/mm) |
8 |
| Paper width(mm) |
58 / 60 |
80 / 82.55 |
| Printing width(mm) |
54/56 |
76/80 |
| Speed(mm/sec)max |
250 |
| Paper path |
Curved / Straight |
| Detection |
Head temperature |
By thermistor |
| Out of paper |
By photo interrupter |
| Mark position |
By photo interrupter |
| Platen position |
By mechanical switch |
| Cutter position dete |
By mechanical switch |
| Power supply(V) |
Operation voltage (Vdd) |
4.75 to 5.25 |
| Operation voltage (Vp) |
21.6 to 26.4 |
| Peak current(A) |
Head |
5.9(26.4V/128 dots) |
| Motor |
1.0 |
| Cutter |
1.2 |
| Auto cutter |
Method |
Slide type |
| Paper thickness (μm) |
57 to 155*1 |
| Cutting type |
Full cut / Partial cut(Leave center point) |
| Operating time(sec/cycle)max |
2 |
| Cutting pitch(mm)min |
10 |
| Cut frequency(cut/min)max |
30 |
| Service life |
Pulse activation(pulse) |
150 million |
| Abrasion resistance (km) |
150*1 |
| Paper cutting(cut) |
1.000.000 |
| Operating temperature (°C) |
-20 to 60 |
| Dimensions(W x D x H mm) |
89.5 X 50.0 X 30.0 *2 |
112.0 X 50.0 X 30.0 *2 |
| Mass(g) |
Approx.240 |
Approx.290 |
| Driver |
Windows® XP/Vista/7(32bit/64bit),OPOS(XP),Linux |
*1 Use recommended thermal papers *2 Excluding protrusion
Windows® is the registered trademark of Microsoft Corporation (USA). |
| Model |
LTP9247 |
LTP9347 |
| Printing |
Method |
Thermal line dot printing |
| Number of dots/line |
448 |
640 |
| Resolution(dots/mm) |
8 |
| Paper width(mm) |
58 / 60 |
80 / 82.55 |
| Printing width(mm) |
54/56 |
76/80 |
| Speed(mm/sec)max |
250 |
| Paper path |
Curved / Straight |
| Detection |
Head temperature |
By thermistor |
| Out of paper |
By photo interrupter |
| Mark position |
By photo interrupter |
| Platen position |
By mechanical switch |
| Cutter position |
- |
| Power supply(V) |
Operation voltage (Vdd) |
4.75 to 5.25 |
| Operation voltage (Vp) |
21.6 to 26.4 |
| Peak current(A) |
Head |
5.9(26.4V/128 dots) |
| Motor |
1.0 |
| Cutter |
- |
| Auto Cutter |
Method |
- |
| Paper thickness (μm) |
- |
| Cutting type |
- |
| Operating time(sec/cycle)max |
- |
| Cutting pitch(mm)min |
- |
| Cut frequency(cut/min)max |
- |
| Service life |
Pulse activation(pulse) |
150 million |
| Abrasion resistance (km) |
150*1 |
| Life (cut) |
- |
| Operating temperature (°C) |
-20 to 60 |
| Dimensions(W x D x H mm) |
88.8 X 50.0 X 29.7 *2 |
111.25 X 50.0 X 29.7 *2 |
| Mass(g) |
Approx.150 |
Approx.180 |
| Driver |
Windows® XP/Vista/7(32bit/64bit),OPOS(XP),Linux |
*1 Use recommended thermal papers *2 Excluding protrusion
|
Interface
| Model |
IF9001-03U |
IF9001-03S |
| CPU |
Custom CPU |
| Thermal printer |
CAP9247, CAP9347, LTP9247, LTP9347 |
| Operating voltage(V) |
Vp:21.6 to 26.4 |
| Character matrix(HXW dots) |
16 dots characters :16X8,16X16
24 dots characters :24X12,24X24 |
| Character type |
Extended graphics character set |
Yes |
Yes |
| Katakana character set |
Yes |
Yes |
| Optional font |
Yes |
Yes |
| Downloaded character |
Yes |
Yes |
| User-defined character |
Yes |
Yes |
| JIS 1&2 level Kanji |
Yes |
Yes |
| Communication interface |
USB |
Serial(RS-232C) |
| Dimensions(W x D x H mm) |
108.0 X 90.0 X 28.0 |
↑PAGE TOP
|
 |
|
|
|
 |
|
|
|
| Copyright © Seiko Instruments Inc.
, All Rights Reserved. |
|
|
|
|
|
|
|
|
