 |
|
|
|
 |
- Max printing speed: 220mm/sec
- Platen latch function
- Heavy-duty: 100mil. pulse, 100km
- Auto cutter option (Slide type) available
     |
|
| Model |
LTPF247F |
LTPF247E |
LTPF347F |
LTPF347E |
| Printing |
Method |
Thermal line dot printing |
| Number of dots/line |
432 |
576 |
| Resolution(dots/mm) |
8 |
| Paper width(mm) |
58 |
80 |
| Printing width(mm) |
54 |
72 |
| Speed(mm/sec)max |
220 |
100 |
220 |
100 |
| Paper path |
Curved |
| Detection |
Head temperature |
By thermistor |
| Platen position |
By mechanical switch |
| Out of paper |
By photo interrupter |
| Power supply(V) |
Operation voltage(Vdd) |
4.75 to 5.25 |
| Operation voltage(Vp) |
21.6 to 26.4 |
| Peak current(A) |
Head |
5.4 (26.4V / 128 dots) |
2.6 (26.4V / 144 dots) |
5.4 (26.4V / 128 dots) |
2.6 (26.4V / 144 dots) |
| Motor |
0.46 |
0.55 |
0.46 |
0.55 |
| Service life |
Pulse activation( pulse) |
100 million |
| Abrasion resistance(km) |
100*1 |
| Operating temperature (°C) |
0 to 50 |
| Dimensions(W x D x H mm) |
86.2 x 54.0 x 25.8 *2 |
110.2 x 54.0 x 25.8 *2 |
| Mass(g) |
Approx.150 |
Approx.175 |
*1 Use recommended thermal papers *2 Excluding protrusion
|
Interface
| Model |
IFF001-02B |
IFF001-02BK |
| CPU |
PTF00P01 |
| Thermal Printer |
LTPF247F, LTPF347F |
| Operating voltage(V) |
Vp:21.6 to 26.4, Vcc: 4.5 to 5.5 |
| Character matrix(HXW dots) |
16 dots characters : 16x8, 16x16
24 dots characters : 24x12, 24x24
|
| Character type |
Extended graphics character set |
Yes |
Yes |
| Katakana character set |
No |
Yes |
| Optional Font |
Yes |
Yes |
| Downloaded Character |
Yes |
Yes |
| User-defined Character |
Yes |
Yes |
| JIS 1&2 level Kanji |
No |
Yes |
| Communication interface |
Parallel, Serial(C-MOS) |
| Dimensions(W x D x H mm) |
80.0 x 100.0 x 19.6 |
CPU
| Model |
PTF00P01 |
PTF20P01 |
| Thermal Printer |
LTPF247F, LTPF347F |
LTPF247E, LTPF347E |
| Package form |
144pin QFP |
128pin QFP |
| Operating voltage(V) |
Vp: 21.6 to 26.4
Vcc: 4.5 to 5.5 |
Vp: 21.6 to 26.4
Vcc: 4.75 to 5.25 |
| Operating frequency(MHz) |
27 +/- 0.5% |
18.43 +/- 0.5% |
| Configuration |
C-MOS LSI |
| Communication interface |
Parallel, Serial |
| Character type |
Extended graphics character set,
Other characters is availabe with CGs*1 or external ROM |
| Character matrix(H x W dots) |
16dots characters : 16 x 8, 16 x 16
24dots characters : 24 x 12, 24 x 24
|
| Dimensions(W x D x H mm) |
22.0 x 22.0 x 3.05 |
22.0 x 16.0 x 3.15 |
| *1 CG ROM: Japanese |
Auto cutter
| Model |
ACUF224J |
ACUF224H |
ACUF324J |
ACUF324H |
| Thermal Printer |
LTPF247 |
LTPF347 |
| Cutting |
Method |
Slide type |
| Paper width (mm) |
58 |
80 |
| Paper thickness (μm) |
60 to 80 *1 |
| Cutting type |
Partial cut
(Leave center point) |
Full cut |
Partial cut
(Leave center point) |
Full cut |
| Operating time (sec/cycle)max |
0.6 (24V) |
| Cutting pitch (mm)min |
10 |
| Cut frequency (cut/min)max |
30 |
Operating
voltage(V) |
Motor |
21.6 to 26.4 |
| Detector (control switch) |
4.5 to 5.5 |
| Starting current (A) |
1.2 |
| Life (cut) |
1,000,000 *2 |
| Dimensions(W x D x H mm) |
80.0 X 64.0 X 19.0 |
102.0 X 64.0 X 19.0 |
| Mass(g) |
Approx.130 |
Approx.150 |
| *1 Use recommended thermal papers *2 Depending upon specified conditions. |
Winder unit
| Model |
WU282 |
| Thermal Printer |
LTPF247F |
Paper width (mm)
|
58 |
| Paper thickness(μm) |
70 to 80 |
| Outside diameter of paper roll (mm)max |
Φ83 |
| Inside diameter of paper roll (mm)min |
Φ20 |
| Operating voltage (V) |
21.6 to 26.4 |
| Speed (mm/s)max |
220 |
| Life(operationg hours) |
160 |
| Dimensions(W x D x H mm) |
87.8 X 92.0 X 97.6 |
| Mass(g) |
Approx.136 |
|
 |
|
|
|
 |
|
|
|
| Copyright © Seiko Instruments Inc.
, All Rights Reserved. |
|
|
|
|
|
|
|
|
z
