- Inner diameter
- φ30mm×20mm
- Material
- Carbide
- Feature
- Slits on the grinding surface
BACKGROUND
With the grinder owned by the customer, there was a large variation in the inner diameter of the workpiece after grinding, and it was difficult to control the machining accuracy.
It took a lot of time to regrind.
MODEL / SPINDLE
- Machine
- STG-6N
- spindle type
- SSPG-045 T100(Max45,000rpm)
RESULT
OTHER CASES
-
Mold partsDrawing dieBenefits
導入効果：< Machine time Reduced by 80％（Comparison with conventional machines）｜Surface roughness Ra ≦ 0.2μm > -
Ceramic partsCeramic sleeveBenefits
導入効果：< Machine time Reduced by 80％（Comparison with conventional machines）｜Surface roughness Ra ≦ 0.4μm｜Roundness ≦ 0.35μm > -
GearGearBenefits
導入効果：< Machine time Reduced by 80％（Comparison with conventional machines）｜Surface roughness Ra ≦ 0.1μm > -
ToolsChuck collet
Benefits
導入効果：< Significant reduction in work time｜Machine time Reduced by 70％｜Surface roughness Ra ≦ 0.1μm > -
Precision measuring gauges and equipmentRing gaugeBenefits
導入効果：< Surface roughness Ra ≦ 0.1μm｜Roundness ≦ 0.3μm｜Machine time Reduced by 60％（Comparison with conventional machines） >