QCA922 【水晶振動子化学計測システム】 <製造販売終了製品>

※ QCA922-10(QA-CLシリーズ用アダプタケーブル)とQCA922-20(QCA922用ディップ型セル)の製造販売も終了しております。



Zhou, Zhen, et al. “Real-time monitoring of the contractile properties of H9C2 cardiomyocytes by double resonator piezoelectric cytometry.” Analytical Methods (2023).

Wu, Chin-Wei, Ming-Hung Chiang, and Chien-Liang Lee. “Pd@Au Core-Shell Octahedral, truncated Octahedral, and cubic nanocrystals as nonenzymatic glucose sensors for drinks.” Microchemical Journal 190 (2023): 108697.

Zhou, Zhen, et al. “Quartz Crystal Microbalance Technology Coupled with Impedance for the Dynamic Monitoring of the Cardiomyocyte Beating Function and Drug Screening.” Biosensors 13.2 (2023): 198.
[Keywords: electrical impedance sensing, quartz crystal microbalance, interface modification, condition optimization, association, rat primary coronary]

Nakagawa, Fuyuki, et al. “Fabrication of flexible conductive nanosheets at air-water interface by UV irradiation of loosely-packed AgNPs monolayer.” Colloids and Surfaces A: Physicochemical and Engineering Aspects 656 (2023): 130499.
[Keywords: Conductive nanosheets, Ag nanoparticles, UV irradiation, Air–water interface, Adsorbed monolayer]

Hsu, Shih-Chieh, et al. “Facile synthesis of hybrid WO3/MoOx electrochromic films for application in complementary electrochromic devices.” Journal of Alloys and Compounds 945 (2023): 169256.
[Keywords: Electrochromism, WO3, MoO3, Oxygen vacancy, Complementary device]

Cai, Jingfang, et al. “Detection of formic acid and acetic acid gases by a QCM sensor coated with an acidified multi-walled carbon nanotube membrane.” Environmental Technology 44.6 (2023): 751-761.
[Keywords: QCM, acidized-MMWCNTs, formic acid vapour, acetic acid vapour, gas sensor]

Lee, Hajin, et al. “Inhibition of Si Fracture Via Rigid Solid Electrolyte Interphase in Lithium-Ion Batteries.” Advanced Energy Materials 13.5 (2023): 2202780.
[Keywords: electrochemical quartz crystal microbalance, fracture inhibition, Si thin film, stiff SEI]

Alawajji, Raad A., et al. “Biosensor Design for the Detection of Circulating Tumor Cells Using the Quartz Crystal Resonator Technique.” Biosensors 13.4 (2023): 433.
[Keywords: quartz crystal resonator, sensing circulating tumor cells, point-of-care diagnosis, MCF-7, PANC-1, PC-3]

Barsan, Madalina M., et al. “Synthetic peptide array on gold for the electrochemical assessment of the 20S proteasome activity and effect of inhibitory compounds.” Applied Surface Science 610 (2023): 155620.
[Keywords: Synthetic peptide, Electrochemistry, Biomarker, Proteasome activity, Proteasome inhibition]

Chen, Jierui, et al. “Zinc-Ion Capacitors with Fast Kinetics at a High Mass Loading.” Chemistry of Materials 35.10 (2023): 4089-4099.

Pang, Linjiang, et al. “Identification of sweetpotato black spot disease caused by Ceratocystis fimbriata by quartz crystal microbalance array.” Sensors and Actuators B: Chemical 386 (2023): 133761.

Li, Dandan, et al. “The visualization method of environmental risk assessment for metal cultural relics in museums based on Quick Response code.” Journal of Cultural Heritage 62 (2023): 21-31.

Yang, Jin Chul, et al. “Molecularly Imprinted Chalcone-Branched Polyimide-Based Chemosensors with Stripe Nanopatterns for the Detection of Melittin.” ACS sensors (2023).
[Keywords: melittin, molecular imprinting, quartz crystal microbalance, chalcone-branched polyimide, imprinting factor, photocrosslinking]

Zhou, Tiean, et al. “Real‐Time Quantification of Cell Mechanics and Functions by Double Resonator Piezoelectric Cytometry–Theory and Study of Cellular Adhesion of HUVECs.” Advanced Materials Interfaces (2023): 2300048.
[Keywords: cell adhesion dynamics, cell generated forces, cell viscoelasticity, double resonator piezoelectric cytometry, quantifying cell mechanics]

Mohanty, Sangram Keshari, et al. “Electrochemically Activated Expanded Graphite with Tailor‐made Pores for Magnesium‐Organocation Hybrid Batteries.” ChemSusChem (2023): e202300035.

Fic, Krzysztof, et al. “Fundamentals and implication of PZC determination for activated carbons in aqueous electrolytes.” (2023).

Huang, Weiyuan, et al. “Exploiting Cation Intercalating Chemistry to Catalyze Conversion-Type Reactions in Batteries.” ACS nano 17.6 (2023): 5570-5578.
[Keywords: Na-ion battery, Na-CO2 battery, catalysis, layered oxide, intercalating redox mediator, cation intercalating chemistry]

Ji, Yuchen, et al. “In situ probing the origin of interfacial instability of Na metal anode.” Chem (2023).
[Keywords: Na metal battery, solid electrolyte interphase, SEI, SEI dissolution, EQCM, in situ AFM, in situ SHINERS, DEMS, cryo-TEM, TOF-SIMS]

Priyadarshi, Nitesh, and Nitin Kumar Singhal. “Quartz Crystal Microbalance (QCM)-Based Nanosensors for the Detection of Pathogenic Bacteria.” Nanosensors for Point-of-Care Diagnostics of Pathogenic Bacteria. Singapore: Springer Nature Singapore, 2023. 143-167.


Jin, SangHoon, et al. “Unraveling Adsorption Behaviors of Levelers for Bottom-Up Copper Filling in Through-Silicon-Via.” Electronic Materials Letters (2022): 1-10.
[Keywords: Leveler, Through-silicon-via, Adsorption behaviors, QCM, EQCM, Cu electrodeposition]

Jo, Yugeun, et al. “Complementary Adsorption of Binary Levelers for Highly Uniform Cu Micropillars.” ACS omega 7.41 (2022): 36880-36887.

Fukami, Kazuhiro, et al. “Macroscopically uniform and flat lithium thin film formed by electrodeposition using multicomponent additives.” Electrochemistry Communications 136 (2022): 107238.
[Keywords: Lithium, Electrodeposition, Additive, Multicomponent, Dendrite-free]

Tsubonouchi, Yuta, et al. “Characterization of electrocatalytic proton reduction and surface adsorption of platinum nanoparticles supported by a polymeric stabilizer on an ITO electrode.” Sustainable Energy & Fuels 6.3 (2022): 815-821.

Survila, A., et al. “Equilibration processes in alkaline Cu|Cu(II), glycine system.” Chemija 33.1 (2022).
[Keywords: copper, glycine, intermediate complexes, equilibration]

Shao, Wenbo, et al. “Depolarization of Cu electrodeposition in the presence of Ag: A cyclic-voltammetry study.” Electrochimica Acta 405 (2022): 139796.
[Keywords: Copper-silver system, Cu electrodeposition, Cyclic voltammetry, Electrochemical quartz crystal microbalance, Tafel slope]

Wang, Shih-Sin, et al. “Tuning structures of Pt shells on Pd nanocubes as neutral glucose oxidation catalysts and sensors.” Applied Surface Science 605 (2022): 154670.
[Keywords: High-indexed facets, Nonconvex surface effect, Electrochemical quartz crystal microbalance, Glucose electrooxidation reaction, Non-enzymatic glucose sensor]

Kodera, Fumihiro, et al. “Influence of Chlorine Oxyacid on the Electrooxidation of Methanol in Strong Acid.” Chemistry Letters 51.6 (2022): 666-668.
[Keywords: Methanol, Electrooxidation, Chlorine oxyacid]

Sagane, Fumihiro, and Akiya Muramatsu. “The effect of Mg morphology on the irregular behavior of the electrochemical quartz crystal microbalance in Mg [N(CF3SO2)2]2/glyme solutions.” Electrochemistry 90.5 (2022): 057003-057003.
[Keywords: Magnesium Secondary Batteries, EQCM, Mg Plating]

Survila, Arvydas, Stase Kanapeckaite, and Laurynas Staisiunas. “Anodic processes in the alkaline Cu|Cu(II), glycine system—construction and analysis of mass transport–corrected Tafel plots.” Journal of Solid State Electrochemistry (2022): 1-8.
[Keywords: copper, glycine, Anodic dissolution, Surface concentration, Tafel plots, Kinetic parameters]

Kitta, Mitsunori, et al. “Optical Study of the Surface Film Formed during Li-Metal Deposition and Dissolution Investigated by Surface Plasmon Resonance Spectroscopy.” ACS Applied Materials & Interfaces 14.24 (2022): 28370-28377.
[Keywords: Li-metal secondary battery, negative electrode reaction, Li-metal deposition and dissolution cycle, electrode surface film, optical property, surface plasmon resonance spectroscopy]

Fang, Zehui, et al. “Constructing an anti-S. mutans and mineralizing membrane by combination self-assembled lysozyme with antimicrobial peptide.” Materials & Design 220 (2022): 110891.
[Keywords: Dental caries, Self-assembly, Lysozyme, Remineralization, Antimicrobial peptide]

Hsu, Shih-Chieh, et al. “Morphology evolution and electrochemical behavior of NixMn1-x(OH)2 mixed hydroxides as high-performance electrode for supercapacitor.” Electrochimica Acta 403 (2022): 139692.
[Keywords: Ni-Mn hydroxide, NixMn1-x(OH)2, Coprecipitation, Hierarchical structure, Asymmetric supercapacitor]

Wu, Yi-Shan, et al. “Vacant graphene Nanosheet-Supported platinum nanoparticles as catalysts for neutral glucose oxidation reaction.” Applied Surface Science 578 (2022): 152060.
[Keywords: Glucose electrooxidation reaction, Surface effect, Support effect ,Non-enzymatic glucose sensor ,Linear analysis range]

Liu, Chang, et al. “Construction of a piezoelectric immunosensor for ultra-sensitive and highly selective detection of ribavirin in animal-derived foods.” Analytical Methods 14.25 (2022): 2497-2503.

Liu, Li-Shang, Jong-Min Kim, and Woo-Sik Kim. “In situ discrimination of polymorphs and phase transformation of sulfamerazine using quartz crystal microbalance.” Analytica Chimica Acta 1221 (2022): 340137.
[Keywords: QCM, Surface modification, Selective nucleation, Polymorph discrimination]

Zou, Rui, et al. “Analysis of Ruthenium Electrodeposition in the Nitric Acid Medium.” The Journal of Physical Chemistry C 126.9 (2022): 4329-4337.

Chowdhury, Silvia, et al. “Template-and Etching-Free Fabrication of Two-Dimensional Hollow Bimetallic Metal-Organic Framework Hexagonal Nanoplates for Ammonia Sensing.” Chemical Engineering Journal 450 (2022): 138065.
[Keywords: Metal-organic frameworks, Hollow architecture, Two-dimensional, AmmoniaGas-sensing, Quartz crystal microbalance]

Liu, Xinqian, et al. “Carbenoxolone as a multifunctional vehicle for electrodeposition and surface modification of materials.” NOVEL COLLOIDAL METHODS FOR FABRICATION OF COMPOSITE COATINGS (2022): 108.

Deen, Imran, et al. “Electrophoretic deposition of collagen/chitosan films with copper-doped phosphate glasses for orthopaedic implants.” Journal of colloid and interface science 607 (2022): 869-880.
[Keywords: Biomaterials, Electrophoretic deposition, Coatings, Orthopaedics, Electrochemistry]

Wang, Tzu‐Pei, Ping‐Yuan Tsou, and Chien‐Liang Lee. “Supportive activity of Pt nanoparticles on the nitrogen‐doped graphene nanosheet with vacancy defects for catalyzing neutral glucose oxidation.” International Journal of Energy Research 46.6 (2022): 8491-8502.
[Keywords: electrochemical exfoliation, EQCM, glucose electrooxidation, N-doped graphene, nonenzymatic glucose sensor, reduced graphene oxides, sonoelectrochemical exfoliation, vacancy defects]

Choi, Doo Young, Jin Chul Yang, and Jinyoung Park. “Optimization and characterization of electrochemical protein Imprinting on hemispherical porous gold patterns for the detection of trypsin.” Sensors and Actuators B: Chemical 350 (2022): 130855.
[Keywords: Molecular imprinting, Trypsin, Hemispherical pore patterns, Electropolymerization, Impedimetric analysis, Quartz crystal microbalance]

Wang, Lei, and Hidenori Noguchi. “Oxygen Reduction Reaction Mechanism in Highly Concentrated Lithium Nitrate-Dimethyl Sulfoxide: Effect of Lithium Nitrate Concentration.” The Journal of Physical Chemistry C 126.28 (2022): 11457-11467.

Yang, Jinchul, and Jinyoung Park. “QCM-Based HCl Gas Detection on Dimethylamine-Functionalized Crosslinked Copolymer Films.” Chemosensors 10.2 (2022): 70.
[Keywords: toxic gas, 2-dimethylaminoethyl methacrylate, quartz crystal microbalance]

Staisiunas, Laurynas, et al. “Silicon Passivation by Ultrathin Hafnium Oxide Layer for Photoelectrochemical Applications.” Frontiers in Chemistry 10 (2022): 275.
[Keywords: silicon, passivation, photoelectrochemistry, hafnium oxide, nanogravimetry, hydrogen photogeneration]

Kim, Kyung-Geun, et al. “In-Situ Measurement of Drying and Electrochemical-Cycling-Induced Mechanical Behavior and Delamination of Polypyrrole Electrodes for Energy Storage Applications.” Surfaces and Interfaces 34 (2022): 102297.

Kalinauskas, Putinas, et al. “Photoelectrochemical and Nanogravimetric Study of Electrolytic Transformation of Silicon-Oxide Interface.” Journal of The Electrochemical Society 169.3 (2022): 036508.

Zang, Dejin, et al. “Layer by Layer Self-Assembled Hybrid Thin Films of Porphyrin/Polyoxometalates@Pt Nanoparticles for Photo & Electrochemical Application.” Materials Today Communications (2022): 103811.
[Keywords: Polyoxometalates, Porphyrin, organic-inorganic hybrid, Photo/Electrochemistry]

Tediashvili, Davit, et al. “Synthesis, characterization, and degradation study of Mn-based phosphate frameworks (Na3MnTi(PO4)3, Na3MnPO4CO3, Na4Mn3(PO4)2P2O7) as aqueous Na-ion battery positive electrodes.” Electrochimica Acta 417 (2022): 140294.

Si, Beom Min, et al. “Fabrication and Sensing Properties of Fibrous-Like Chlorophenoxy Herbicide-Imprinted Polymeric Matrix via Microcontact Printing.” Macromolecular Research 30.10 (2022): 731-736.
[Keywords: molecular imprinting, herbicide, micro-contact printing, fibrous pattern ,electrospinning]

Jimenez-Rodriguez, Mildred G., et al. “Biosensors for the detection of disease outbreaks through Wastewater-based Epidemiology.” TrAC Trends in Analytical Chemistry (2022): 116585.
[Keywords: Pathogens, WBE, Nanostructured, Biosensing, Resource-constrained regions]

Chowdhury, Silvia, et al. “Template-and Etching-Free Fabrication of Hollow Two-Dimensional Bimetallic Metal-Organic Framework Hexagonal Nanoplates for Ammonia Sensing.” Md Abdul and Karim, Mohammad Rezaul and Yuliarto, Brian and Hossain, Md Shahriar and Yamauchi, Yusuke and Kaneti, Yusuf Valentino, Template-and Etching-Free Fabrication of Hollow Two-Dimensional Bimetallic Metal-Organic Framework Hexagonal Nanoplates for Ammonia Sensing.
[Keywords: Metal-organic frameworks, Hollow architecture, Two-dimensional, Ammonia, Gas-sensing, Nanoplates]

Pichereau, Laure, Christelle Gautier, and Tony Breton. “Real-time spectroelectrochemical monitoring of the diazonium electrografting.” Journal of Materials Chemistry C 10.18 (2022): 7111-7118.

Wang, Li, et al. “High Energy and Power Zinc Ion Capacitors: A Dual-Ion Adsorption and Reversible Chemical Adsorption Coupling Mechanism.” ACS nano 16.2 (2022): 2877-2888.
[Keywords: hierarchical porosity, dual-ion adsorption, chemical adsorption, high energy density, zinc ion capacitors]

芹澤信幸, and 片山靖. “イオン液体中における金属のアノード溶解時の物質移動と電解研磨.” 表面技術 73.7 (2022): 353-358.
[Keywords: Electropolishing, Anodic Dissolution, Ionic Liquid, Quartz Crystal Microbalance]


Matsumiya, Masahiko, et al. “Electrodeposition Behavior of Extracted Platinum Complex in Phosphonium-Based Ionic Liquids Evaluated by Electrochemical Quartz Crystal Microbalance.” Journal of The Electrochemical Society 168.7 (2021): 076508.

Guo, Jianping, et al. “Quartz crystal microbalance sensor based on 11-mercaptoundecanoic acid self-assembly and amidated nano-titanium film for selective and ultrafast detection of phosphoproteins in food.” Food Chemistry 344 (2021): 128656.
[Keywords: Phosphoproteins, Quartz crystal microbalance sensor, Aminated nano-titanium dioxide, Ultrafast determination, Food]

Chiba, Hiroka, Masakazu Morimoto, and Masahiro Irie. “Stepwise Assembly of Ultrathin Poly(vinyl alcohol) Films on Photoresponsive Diarylethene Crystals.” Chemistry Letters 50.1 (2021): 84-86.

Liu, Xuefeng, et al. “Characterization of electrode fouling during electrochemical oxidation of phenolic pollutant.” Frontiers of Environmental Science & Engineering 15.4 (2021): 1-10.
[Keywords: Electro-oxidation, Electrode fouling, Polymeric film, Chloride ions]

Hsiao, Yu-Sheng, et al. “Enhanced electrochromic performance of carbon-coated V2O5 derived from a metal–organic framework.” Applied Surface Science 542 (2021): 148498.
[Keywords: Electrochromism, Metal–organic framework, V2O5, Carbon coating, High conductivity]

Hsu, Su-Yang, et al. “Defective graphene nanosheets with heteroatom doping as hydrogen peroxide reduction catalysts and sensors.” Sensors and Actuators B: Chemical 328 (2021): 129015.
[Keywords: Hydrogen peroxide reduction reaction, Defective graphene nanosheets, Heteroatom doping, Hydrothermal reaction]

Yang, Kai, et al. “Atomic/nano-scale in-situ probing the shuttling effect of redox mediator in Na–O2 batteries.” Journal of Energy Chemistry 56 (2021): 438-443.
[Keywords: Na-O2 battery, In-situ AFM, EQCM, Redox mediator, Shuttling effect]

Chung, Jaewon, Habin Park, and Cheolsoo Jung. “Electropolymerizable isocyanate-based electrolytic additive to mitigate diffusion-controlled self-discharge for highly stable and capacitive activated carbon supercapacitors.” Electrochimica Acta 369 (2021): 137698.
[Keywords: Self-discharge, Capacitance, Electropolymerization, Isocyanate, Supercapacitor]

Peng, Bingquan, et al. “Selective transport properties of graphene oxide membranes for various cations observed in situ using quartz crystal microbalance.” Applied Surface Science 541 (2021): 148502.
[Keywords: Graphene oxide membrane, Quartz crystal microbalance, Adsorption, Interlayer spacing control, Ion transmission]

Liu, Chang, et al. “A Novel Multi-purpose MIP for SPE-HPLC and QCM Detection of Carbaryl Residues in Foods.” Food Analytical Methods 14.2 (2021): 331-343.
[Keywords: Carbaryl, Molecularly imprinted polymer, Quartz crystal microbalance sensor, Solid-phase extraction, High-performance liquid chromatography]

Xi, Xinge, et al. “Label-Free Quartz Crystal Microbalance Biosensor Based on Aptamer-Capped Gold Nanocages Loaded with Polyamidoamine for Thrombin Detection.” ACS Applied Nano Materials 4.10 (2021): 10047-10054.
[Keywords: QCM biosensor, thrombin detection, gold nanocages, thrombin aptamers, target-triggered release]

Niu, Junjian, et al. “An electroactive montmorillonite/polyaniline nanocomposite film: Superfast ion transport and ultra-affinity ion recognition for rapid and selective separation of Pb2+ ions.” Chemical Engineering Journal 413 (2021): 127750.
[Keywords: Electroactive nanocomposite film, Proton migration, Superfast ion transport, Ultra-affinity ion recognition, Rapid and selective separation]

Huo, Zhaohui, et al. “Photocurrent generation from visible light irradiation of covalent polyoxometalate–porphyrin copolymers.” Electrochimica Acta 368 (2021): 137635.
[Keywords: Copolymerization, Organic–inorganic hybrid composites, Polyoxometalates, Porphyrinoids, Thin films, Photocurrent generation]

Platek-Mielczarek, Anetta, Elzbieta Frackowiak, and Krzysztof Fic. “Specific carbon/iodide interactions in electrochemical capacitors monitored by EQCM technique.” Energy & Environmental Science 14.4 (2021): 2381-2393.

Ueda, Masato, et al. “Utilisation of Titanium and Titanium Dioxide as Scaffolds for Proliferating Coral Reef.” Materials Science Forum. Vol. 1016. Trans Tech Publications Ltd, 2021.
[Keywords: Bone, Calcium Carbonate, Hard Corals, Planula Larva, Quartz Crystal Microbalance]

Cai, Jingfang, et al. “Detection of formic acid and acetic acid gases by a QCM sensor coated with an acidified multi-walled carbon nanotube membrane.” Environmental Technology (2021): 1-11.
[Keywords: QCM, acidized-MMWCNTs, formic acid vapour, acetic acid vapour, gas sensor]

Liu, Xinqian, et al. “Carbenoxolone as a Multifunctional Vehicle for Electrodeposition of Materials.” Applied Sciences 11.19 (2021): 9110.
[Keywords: electrophoretic deposition, film, diamond, polytetrafluoroethylene, graphene, composite, dispersant, corrosion protection]

Barsan, Madalina M., et al. “Immobilized Antibodies on Mercaptophenylboronic Acid Monolayers for Dual-Strategy Detection of 20S Proteasome.” Sensors 21.8 (2021): 2702.
[Keywords: electrochemistry, immunosensor, oriented antibodies, mercaptophenylboronic acid, self-assembled monolayers, 20S proteasome, enzymatic activity, proteolysis, labeled antibody, alkaline phosphatase]

Zhou, Xunzhu, et al. “Unlocking the Allometric Growth and Dissolution of Zn Anodes at Initial Nucleation and an Early Stage with Atomic Force Microscopy.” ACS Applied Materials & Interfaces 13.44 (2021): 53227-53234.
[Keywords: allometric model, nucleation and growth, in situ AFM, electrodeposition, Zn anode]

Liang, Yiming, et al. “A 3D electropolymerized thin film based on an isoporphyrin and on a pyridine end-decorated molybdenum(II) halide cluster: Photoelectrochemical and impedance properties.” Electrochimica Acta 388 (2021): 138493.
[Keywords: Electropolymerization, Organic-inorganic hybrid composites, Molybdenum(II) halide cluster, Porphyrinoids, Isoporphyrin, Thin films, Photocurrent generation]

Alsaleem, Abdullah Hussain A., et al. “Comparison of cultured cell attachment on a temperature-responsive polymer, poly-l-lysine, and collagen using modeling curves and a thermal-controlled quartz crystal microbalance.” Journal of Biological Physics 47.2 (2021): 117-129.
[Keywords: Quartz crystal microbalance, Temperature-responsive polymer, Poly(N-isopropylacrylamide), Cultured cell, Cell attachment process]

Kwon, Ki Young, et al. “Potential-Dependent Passivation of Zinc Metal in a Sulfate-Based Aqueous Electrolyte.” Langmuir 37.45 (2021): 13218-13224.

Wang, Tzu-Pei, et al. “Potential-induced sonoelectrochemical graphene nanosheets with vacancies as hydrogen peroxide reduction catalysts and sensors.” Ultrasonics sonochemistry 72 (2021): 105444.
[Keywords: Defect effect, Ultrasound, Specific activity, Reaction kinetics, Amperometric sensor]

Shimabukuro, Izuru, et al. “Regeneration of Fully-discharged Graphite-Fluoride Lithium Primary Battery as Electrochemical Capacitor.” Electrochemistry 89.2 (2021): 87-93.
[Keywords: Graphite-fluoride, Li Battery, Defluorination, Hybrid Capacitor]

Hardoyono, Fajar, and Kikin Windhani. “Identification and detection of bioactive compounds in turmeric (Curcuma longa L.) using a gas sensor array based on molecularly imprinted polymer quartz crystal microbalance.” New Journal of Chemistry 45.38 (2021): 17930-17940.

Belevskii, Stanislav, et al. “The Influence of Sodium Tungstate Concentration on the Electrode Reactions at Iron–Tungsten Alloy Electrodeposition.” Coatings 11.8 (2021): 981.
[Keywords: Fe-W alloys, induced codeposition, electrode reaction, distribution of species, EQCM, rotating disk electrode]

Torad, Nagy L., et al. “Phenyl-Modified Carbon Nitride Quantum Nanoflakes for Ultra-Highly Selective Sensing of Formic Acid: A Combined Experimental by QCM and Density Functional Theory Study.” ACS Applied Materials & Interfaces 13.41 (2021): 48595-48610.
[Keywords: colloidal phenyl carbon nitride, quantum nanoflakes, quartz crystal microbalance, HCOOH vapors, sensitivity and selectivity]

Torad, Nagy L., et al. “Nanoarchitectured porous carbons derived from ZIFs toward highly sensitive and selective QCM sensor for hazardous aromatic vapors.” Journal of Hazardous Materials 405 (2021): 124248.
[Keywords: Carbon nanoarchitectures, Nanoporous carbons (NPCs), Metal-organic frameworks, Vapor discrimination, Quartz crystal microbalance]

Yang, Jin Chul, et al. “Molecular imprinting of hemispherical pore-structured thin films via colloidal lithography for gaseous formaldehyde Gravimetric sensing.” Applied Surface Science 570 (2021): 151161.
[Keywords: Molecular imprinting, Formaldehyde, Colloidal lithography, Pore arrays, Gravimetric sensing, Sensitivity]

Yang, Jin Chul, Suck Won Hong, and Jinyoung Park. “Improving Surface Imprinting Effect by Reducing Nonspecific Adsorption on Non-imprinted Polymer Films for 2,4-D Herbicide Sensors.” Chemosensors 9.3 (2021): 43.
[Keywords: molecular imprinting, photopolymerization, silanization, hemispherical silica mold, herbicide]

Zhang, Weidong, et al. “Dynamic interphase-mediated assembly for deep cycling metal batteries.” Science advances 7.49 (2021): eabl3752.

Lee, Jihye, et al. “Enabling the Selective Detection of Endocrine-Disrupting Chemicals via Molecularly Surface-Imprinted “Coffee Rings”.” Biomacromolecules 22.4 (2021): 1523-1531.
[Keywords: molecularly imprinted polymer, coffee-ring, self-assembly, sensors, herbicide]

Chen, Shiming, et al. “Suppressing Polysulfide Shuttling in Lithium-Sulfur Batteries via a Multifunctional Conductive Binder.” Small Methods 5.10 (2021): 2100839.
[Keywords: conductive binder, lithium-sulfur batteries, mechanical stability, polysulfide trapping, shuttle effect]

Shkirskiy, Viacheslav, Eric Levillain, and Christelle Gautier. “Capacitive Impedance for Following In‐Situ Grafting Kinetics of Diazonium Salts.” ChemPhysChem 22.11 (2021): 1074-1078.
[Keywords: diazonium grafting, EIS, QCM, kinetics, capacitance measurements]

Barsan, Madalina M., and Victor C. Diculescu. “An antibody-based amperometric biosensor for 20S proteasome activity and inhibitor screening.” Analyst 146.10 (2021): 3216-3224.

Wan, Fang, et al. “A Universal Compensation Strategy to Anchor Polar Organic Molecules in Bilayered Hydrated Vanadates for Promoting Aqueous Zinc-Ion Storage.” Advanced Materials (2021): 2102701.
[Keywords: aqueous batteries, dendrite-free Zn anodes, layered vanadium oxides, polar organic molecules, pouch full cells]

Narayanan, Thaneer Malai, et al. “Low-cost manganese dioxide semi-solid electrode for flow batteries.” Joule 5.11 (2021): 2934-2954.
[Keywords: energy storagetechno-economic analysis, flow battery, manganese dioxide, zinc, carbon black, rheology, low-costlong-duration]

Huo, Zhaohui, et al. “Synthesis and Characterization of Bisthienylethene-Porphyrin Photoswitchable Copolymers.” European Journal of Organic Chemistry 2021.48 (2021): 6636-6645.
[Keywords: Electropolymerization, Porphyrin, Bisthienylethene, Polymer, Photocyclisation]

Narayanan, Thaneer Malai. Prototype development and techno-economic analysis of electrochemical energy storage systems. Diss. Massachusetts Institute of Technology, 2021.

芹澤信幸, and 片山靖. “アドミッタンス解析法を用いた電気化学水晶振動子マイクロバランス測定.” 電気化学 89.3 (2021): 292-298.

Jeon, Sangheon, et al. “Rotating Cylinder-Assisted Nanoimprint Lithography for Enhanced Chemisorbable Filtration Complemented by Molecularly Imprinted Polymers.” Small 17.52 (2021): 2105733.
[Keywords: chemical filtration, molecularly imprinted polymers, nanoimprint lithography, roll-to-plate]

Vali, Abbas. Preparation and Characterization of Silver and Copper Vanadates. Diss. The University of Texas at Arlington, 2021.

WANG, Lei. Effect of Lithium Salt Concentration on Interfacial Solvation Structure and Electrochemical Oxygen Reduction for Nonaqueous Li-O2 Battery. Diss. 北海道大学, 2021.

Xi, Xinge. Nanomaterial-based Biosensors for Detection of Salmonella Typhimurium and Avian Influenza Virus H5N1 in Poultry. Diss. University of Arkansas, 2021.



Tsuchida, Yusuke, et al. “Electrodeposition Behavior of Extracted Platinum Complex in Ionic Liquids Evaluated By Electrochemical Quartz Crystal Microbalance.” ECS Meeting Abstracts. No. 59. IOP Publishing, 2020.

Myung, Noseung, et al. “Electrosynthesis of MoTe2 Thin Films: A Combined Voltammetry-Electrochemical Quartz Crystal Microgravimetry Study of Mechanistic Aspects.” Journal of The Electrochemical Society 167.11 (2020): 116510.

Myung, Noseung, et al. “Cathodic Electrodeposition of Stoichiometric Cobalt Chalcogenide Thin Films.” ECS Journal of Solid State Science and Technology 9.4 (2020): 041013.

Torad, Nagy L., et al. “MOF-derived hybrid nanoarchitectured carbons for gas discrimination of volatile aromatic hydrocarbons.” Carbon 168 (2020): 55-64.
[Keywords: Graphene oxide (GO), Nanoarchitectured hollow carbon, Vapor discrimination, Quartz crystal microbalance (QCM) nanosensor, Hollow graphitic carbon framework (HGCF) heterostructure]

Yamagata, Shingo, et al. “EQCM analysis of intercalation species into graphite positive electrodes for Al batteries.” Journal of Alloys and Compounds 846 (2020): 156469.
[Keywords: Al battery, Intercalation, EQCM, Pseudocapacitor, Chloride, Solvate ionic liquid]

Hong, Bang-De, and Chien-Liang Lee. “Specific activities of rhombic dodecahedral, octahedral, and cubic Cu2O nanocrystals as glucose oxidation catalysts.” Chemical Engineering Journal 382 (2020): 122994.
[Keywords: Crystalline facet effect, Non-enzymatic glucose sensors, Environmentally friendly catalysts, Reaction mechanism]

Hou, Kaijian, et al. “Rapid detection of Bifidobacterium bifidum in feces sample by highly sensitive quartz crystal microbalance immunosensor.” Frontiers in Chemistry 8 (2020).
[Keywords: quartz crystal microbalance sensor, Bifidobacterium bifidum, immunosensor, Au nanoparticle, feces sample]

Zhang, Qingqing, et al. “RNA aptamer-driven ECL biosensing for tracing histone acetylation based on nano-prism substrate and cascade DNA amplification strategy.” Electrochimica Acta 356 (2020): 136828.
[Keywords: Histone acetyltransferase, Ecl biosensor, Rna aptamer, Dna nanotechnology, Signal amplification]

Zhao, Xiaolei, et al. “Hollow molecularly imprinted polymer based quartz crystal microbalance sensor for rapid detection of methimazole in food samples.” Food chemistry 309 (2020): 125787.
[Keywords: Hollow molecularly imprinted polymer, Methimazole, Quartz crystal microbalance, Sensor, Food samples]

Wang, Tzu-Pei, et al. “Catalysis of the D-glucose Oxidation Reaction Using Octahedral, Rhombic Dodecahedral, and Cubic Pd@ Pt Core-Shell Nanoparticles.” Applied Catalysis B: Environmental 260 (2020): 118140.
[Keywords: Core-shell Pt-Pd particles, Seed-Mediated growth, Epitaxial growth, Electrochemical quartz crystal microbalance, X-ray diffraction pattern]

Matsuno, Masayoshi, Masayuki Kabata, and Ryoichi Akaishi. “Development of Bio-inspired Monomer, Dopamine Acrylamide.” Journal of Photopolymer Science and Technology 33.4 (2020): 457-460.
[Keywords: Dopamine acrylamide, QCM, UV curing, Adhesive, Tackiness, Intermolecular hydrogen bonding, CV]

Wang, Mengqiao, and Shunsuke Yagi. “Layered birnessite MnO2 with enlarged interlayer spacing for fast Mg-ion storage.” Journal of Alloys and Compounds 820 (2020): 153135.
[Keywords: Layered structure, Intercalation, Electrochemical quartz crystal microbalance, Mg battery, Positive electrode]

Matsumiya, Masahiko, et al. “Separation of palladium by solvent extraction with methylamino-bis-N, N-dioctylacetamide and direct electrodeposition from loaded organic phase.” Separation and Purification Technology 234 (2020): 115841.
[Keywords: Direct electrodeposition, MIDOA, Palladium, Solvent extraction]

Wu, Chengjun, et al. “Significant effect of cations on polypyrrole cycle stability.” Solid State Ionics 346 (2020): 115216.
[Keywords: Polypyrrole, Stability, Decay, Cation, Dope]

Baricuatro, Jack H., et al. “Selective conversion of CO into ethanol on Cu(511) surface reconstructed from Cu (pc): Operando studies by electrochemical scanning tunneling microscopy, mass spectrometry, quartz crystal nanobalance, and infrared spectroscopy.” Journal of Electroanalytical Chemistry 857 (2020): 113704.
[Keywords: Electrochemically generated Cu(511) surface, Operando electrode-surface microscopy, Operando molecular vibrational spectroscopy, CO adsorption on Cu vicinal surface, Selective reduction of CO into ethanol]

Muramatsu, Hiroshi, Sae Ito, and Abdullah Hussain A. Alsaleem. “Monitoring and Modeling of Living Cell Responses in the Attachment Process and Reaction to the Antitumor Reagent Cisplatin Studied by a Quartz Crystal Microbalance Combined with a Microscope.” Analytical Chemistry 92.11 (2020): 7907-7914.

Zhou, Xunzhu, et al. “Exploring the Interfacial Chemistry between Zinc Anodes and Aqueous Electrolytes via an In Situ Visualized Characterization System.” ACS Applied Materials & Interfaces 12.49 (2020): 55476-55482.
[Keywords: characterization, interfacial chemistry, Zn dendrite, polyethylene glycol, side reaction]

Tokuyama, Hideaki, Eri Kitamura, and Yoshimi Seida. “Development of zirconia nanoparticle-loaded hydrogel for arsenic adsorption and sensing.” Reactive and Functional Polymers 146 (2020): 104427.
[Keywords: Arsenic adsorption, QCM sensor, Zirconia nanoparticle, N,N-dimethylacrylamide hydrogel, Composite]

Lin, Qiyuan, Eric Hoglund, and Giovanni Zangari. “Electrodeposition of Fe-Ni alloy on Au(111) substrate: Metastable BCC growth via hydrogen evolution and interactions.” Electrochimica Acta 338 (2020): 135876.
[Keywords: Electrodeposition, Fe-Ni, Anomalous codeposition, Hydrogen evolution, Phase constitution]

Wang, Danqin, et al. “Reversible insertion/extraction of polysulfides into/from polyaniline as an effective strategy to confine polysulfides in lithium-sulfur batteries.” Ionics 26.1 (2020): 191-199.
[Keywords: Polyaniline, Polysulfides, Lithium-sulfur battery, Cathode materials, Shuttle effect]

Zhang, Erhui, et al. “Selective recovery of Li+ in acidic environment based on one novel electroactive Li+-imprinted graphene-based hybrid aerogel.” Chemical Engineering Journal 385 (2020): 123948.
[Keywords: Aerogel, Polypyrrole, Benzo-12-crown 4-ether, Graphene oxide, Pulse electropolymerization technique]

Jeon, Yuju, et al. “Pyridinic-to-graphitic conformational change of nitrogen in graphitic carbon nitride by lithium coordination during lithium plating.” Energy Storage Materials 31 (2020): 505-514.
[Keywords: Graphitic carbon nitride (g-C3N4), Pyridinic nitrogen, Graphitic nitrogen, Lithium coordination, Lithium metal battery]

Jin, Young-Jae, and Jinyoung Park. “QCM-Based HCl Gas Sensors Using Spin-Coated Aminated Polystyrene Colloids.” Polymers 12.7 (2020): 1591.
[Keywords: PS colloidal bead, amination, HCl gas, QCM, sensitivity]

Baricuatro, Jack H., et al. “Selective conversion of CO into ethanol on Cu(511) surface reconstructed from Cu(pc): Operando studies by electrochemical scanning tunneling microscopy, mass spectrometry, quartz crystal nanobalance, and infrared spectroscopy.” Journal of Electroanalytical Chemistry 857 (2020): 113704.
[Keywords: Electrochemically generated Cu(511) surface, Operando electrode-surface microscopy, Operando molecular vibrational spectroscopy, CO adsorption on Cu vicinal surface, Selective reduction of CO into ethanol]

Yang, Jin Chul, et al. “Molecularly imprinted quartz crystal microbalance sensors with lithographically patterned frisbee-like pillar arrays for sensitive and selective detection of iprodione.” Sensors and Actuators B: Chemical (2020): 128366.
[Keywords: Molecularly imprinted polymers, Lithography, PDMS molds, Iprodione, Pillar pattern, Freundlich isotherm]

Yao, Chi-Xuan, et al. “Ultra-Stable UiO-66 Involved Molecularly Imprinted Polymers for Specific and Sensitive Determination of Tyramine Based on Quartz Crystal Microbalance Technology.” Polymers 12.2 (2020): 281.
[Keywords: metal-organic frameworks, UiO-66, molecularly imprinted polymers, quartz crystal microbalance, tyramine]

Yang, Jin Chul, Suck Won Hong, and Jinyoung Park. “Molecular imprinting of polymer films on 2D silica inverse opal via thermal graft copolymerization for Bisphenol A detection.” Sensors and Actuators B: Chemical 323 (2020): 128670.
[Keywords: Surface-initiated atom transfer radical polymerization, Colloidal lithography, Silica pore array, Bisphenol-A, Binding affinity, Sensitivity, Freundlich isotherm]

Jiang, Luyao, et al. “High-flux, anti-fouling dendrimer grafted PAN membrane: Fabrication, performance and mechanisms.” Journal of Membrane Science 596 (2020): 117743.
[Keywords: PAMAM, PAN membrane, Antifouling, PBS, Surface energy]

Julian, Trisna, et al. “Intelligent Mobile Electronic Nose System Comprising a Hybrid Polymer-Functionalized Quartz Crystal Microbalance Sensor Array.” ACS omega 5.45 (2020): 29492-29503.

Yang, Jin Chul, and Jinyoung Park. “Molecular Imprinting of Bisphenol A on Silica Skeleton and Gold Pinhole Surfaces in 2D Colloidal Inverse Opal through Thermal Graft Copolymerization.” Polymers 12.9 (2020): 1892.
[Keywords: colloidal lithography, silica inverse opal, gold pinholes, bisphenol-A, Freundlich isotherm]

Zhang, Shuaihua, et al. “Rational design of nanoporous MoS2/VS2 heteroarchitecture for ultrahigh performance ammonia sensors.” Small 16.12 (2020): 1901718.
[Keywords: ammonia, MoS2/VS2 heterostructures, quartz crystal microbalance, sensors, transition metal dichalcogenides]

Zhang, Qiu, et al. “Modulating electrolyte structure for ultralow temperature aqueous zinc batteries.” Nature communications 11.1 (2020): 1-10.


Stankeviciene, I., et al. “Investigation of electroless deposition of cobalt films by EQCM in the presence of different amines.” Materials Science and Engineering: B 241 (2019): 9-12.
[Keywords: Cobalt, Electroless deposition, Amines, EQCM]

Jang, Hansaem, et al. “Reduction of Iridium Loading to the Minimum Level Required for Water Oxidation Electrocatalysis without Sacrificing the Electrochemical Stability.” The Journal of Physical Chemistry C 123.20 (2019): 12928-12934.

Matsumiya, Masahiko, et al. “Recovery of platinum by solvent extraction and direct electrodeposition using ionic liquid.” Separation and Purification Technology 214 (2019): 162-167.
[Keywords: Direct electrodeposition, Electrochemistry, Ionic liquids, Platinum, Solvent extraction]

Yuan, Min, et al. “Piezoelectric arsenite aptasensor based on the use of a self-assembled mercaptoethylamine monolayer and gold nanoparticles.” Microchimica Acta 186.5 (2019).
[Keywords: Arsenite detection, Piezoelectric sensor, Quartz crystal microbalance biosensor, Sandwich structure, Self-assembly, Signal amplification]

Wu, Yi-Shan, Zheng-Wei Wu, and Chien-Liang Lee. “Concave Pd core/island Pt shell nanoparticles: Synthesis and their promising activities toward neutral glucose oxidation.” Sensors and Actuators B: Chemical 281 (2019): 1-7.
[Keywords: High-Index facets, Seed-Growth method, Mechanism, Amperometry, Human serum]

Ito, Fuyuki, Mai Saigusa, and Naoki Kanayama. “Evaporative Crystallization of Dibenzoylmethanato Boron Difluoride Probed by Time-resolved Quartz Crystal Microbalance Responses with Fluorescence Changes.” Chemistry Letters 48.10 (2019): 1199-1202.
[Keywords: Quartz crystal microbalance, Evaporative crystallization, Precursor of nucleate]

Fic, Krzysztof, et al. “Revisited insights into charge storage mechanisms in electrochemical capacitors with Li2SO4-based electrolyte.” Energy Storage Materials 22 (2019): 1-14.
[Keywords: Electrochemical capacitors, Aqueous electrolyte, Activated carbon, Operando techniques]

Kim, Kyung-Geun, and Sung Yeol Kim. “Increase in Interfacial Adhesion and electrochemical Charge storage Capacity of polypyrrole on Au electrodes Using polyethyleneimine.” Scientific reports 9.1 (2019): 1-9.

Wang, Peifen, et al. “A novel electroactive PPy/HKUST-1 composite film-coated electrode for the selective recovery of lithium ions with low concentrations in aqueous solutions.” Electrochimica Acta 306 (2019): 35-44.
[Keywords: HKUST-1 metal-organic framework, Polypyrrole, Electroactive film, Lithium ion recovery, Selectivity]

Yada, Shiho, et al. “Emulsification, solubilization, and detergency behaviors of homogeneous polyoxypropylene-polyoxyethylene alkyl ether type nonionic surfactants.” Colloids and Surfaces A: Physicochemical and Engineering Aspects 564 (2019): 51-58.
[Keywords: Nonionic surfactant, Homogeneous polyoxypropylene-polyoxyethylene chain, Emulsification, Solubilization, Detergency]

Squillace, Ophelie, et al. “Electrodes for membrane surface Science. Bilayer lipid membranes tethered by commercial surfactants on electrochemical sensors.” ACS sensors 4.5 (2019): 1337-1345.
[Keywords: membrane biosensors, electrochemical impedance spectroscopy, biomimetic lipid membrane, sparsely tethered phospholipid bilayer, non-ionic diblock copolymer, oligomeric surfactants, Brij, CiEj]

Fernandez-Barcia, Monica, et al. “Comparative study of the sustainable preparation of FeMn thin films via electrodeposition and magnetron co-sputtering.” Surface and Coatings Technology 375 (2019): 182-196.
[Keywords: FeMn alloys, Electrodeposition, Magnetron co-sputtering, Corrosion, Thin films, Cytotoxicity test]

Chen, Wei, et al. “Detection of hexanal in humid circumstances using hydrophobic molecularly imprinted polymers composite.” Sensors and Actuators B: Chemical 291 (2019): 141-147.
[Keywords: QCM, Hexanal, MIPs, Hydrophobic silica nanoparticles, Agricultural products]

Chang, Tingru, et al. “Understanding the Barrier Layer Formed via Adding BTAH in Copper Film Electrodeposition.” Journal of The Electrochemical Society 166.2 (2019): D10.
[Keywords: Electrodeposition-Copper, benzotriazole, copper electrodeposition/dissolution, surface adsorption]

Liu, Mimi, et al. “A novel potential oscillation in situ removal method: preparation of ion imprinted 8-HQ/PPy film for the selective separation of zinc ions.” Journal of Solid State Electrochemistry 23.8 (2019): 2541-2550.
[Keywords: Zinc ions, Ion-imprinted, Polypyrrole, 8-Hydroxyquinoline, Selective separation]

Mogwase, Boitumelo Mmamopedi Sarah. New insights into the halide-related reactions on platinum surfaces: an electrochemical investigation. Diss. North-West University (South Africa). Potchefstroom Campus, 2019.

Qu, Deyu, et al. “Pt Monolayer Creation on a Au Surface via an Underpotentially Deposited Cu Route.” The Journal of Physical Chemistry C 123.5 (2019): 2872-2881.

Vali, Abbas, et al. “Electrodeposition of Silver Vanadate Films: A Tale of Two Polymorphs.” ChemPhysChem 20.20 (2019): 2635-2646.
[Keywords: electronic band structures, optical bandgap, photocatalysis, semiconductors, solar energy]

Tesemma, Mulugeta, et al. “Investigation of the Dipole Moment Effects of Fluorofunctionalized Electrolyte Additives in a Lithium Ion Battery.” ACS Sustainable Chemistry & Engineering 7.7 (2019): 6640-6653.
[Keywords: Lithium ion battery, Maleimide, Dipole moment, Stereoscopic coordination, Fluorofunctionalized]

Aya, Gita Amiria, et al. “Replicated Pattern Formation and Recognition Properties of 2,4-Dichlorophenoxyacetic Acid-Imprinted Polymers Using Colloidal Silica Array Molds.” Polymers 11.8 (2019): 1332.
[Keywords: molecular imprinting, photopolymerization, colloidal lithography, colloidal silica, herbicide]

Hardoyono, Fajar, et al. “Identification of Bioactive Compounds in Ginger Based on Molecularly Imprinted Polymer Quartz Crystal Microbalance Gas Sensor.” IOP Conference Series: Materials Science and Engineering. Vol. 546. No. 3. IOP Publishing, 2019.

Mukouyama, Yoshiharu, et al. “Fabrication of Uniformly Sized Gold Nanoparticles on Glassy Carbon by Simple Electrochemical Method.” Journal of The Electrochemical Society 166.13 (2019): D669.
[Keywords: Electrodeposition, Au dissolution, AuNPs, GC electrode]

Boudiaf, Moussa, et al. “Stable isoporphyrin copolymer: Electrochemical mechanism and behavior and photovoltaic properties.” Electrochimica Acta 309 (2019): 432-449.
[Keywords: Electropolymerization, Porphyrinoids, Isoporphyrin, Pyridinium, Viologen, Thin films, EPR, EQCM, Impedance, Photocurrent generation]

Chhin, Danny, et al. “Conducting Polymers Doped with Bifunctional Copolymers for Improved Organic Batteries.” ACS Applied Energy Materials 2.11 (2019): 7781-7790.
[Keywords: PEDOT, organic battery, catechol, redox-active polymer, doping]

Zhang, Qingnuan, et al. “Vacuum Filtration‐and‐Transfer Technique Helps Electrochemical Quartz Crystal Microbalance to Reveal Accurate Charge Storage in Supercapacitors.” Small Methods 3.11 (2019): 1900246.
[Keywords: charge storage mechanisms, electrochemical quartz crystal microbalance, Sauerbrey equation, supercapacitors, transfer techniques]

曇艶. Control of Molecular Orientation in Conjugated Polymer Thin Films Prepared by Vapor Deposition Polymerization. Diss. 静岡大学, 2019.


Jee, Hyung-Woo, et al. “Electrosynthesis of Cobalt Telluride Thin Films by Voltammetry Combined with Electrochemical Quartz Crystal Microgravimetry.” Journal of The Electrochemical Society 166.5 (2018): H3035.

Kong, Seonho, Jin Chul Yang, and Jin Young Park. “Caffeine-imprinted conducting polymeric films with 2D hierarchical pore arrays prepared via colloidal mask-assisted electrochemical polymerization.” Sensors and Actuators B: Chemical 260 (2018): 587-592.
[Keywords: Molecularly imprinted conducting polymers, Electropolymerization, Colloidal lithography, Caffeine, Multiscale porous arrays]

Kang, Hyen-Wook, et al. “Investigation of the Extracellular Matrix Effect for the QCM/CCD Cell Activity Monitoring System.” Journal of nanoscience and nanotechnology 18.8 (2018): 5777-5784.
[Keywords: CCD Camera, Collagen Monomer, Collagen Polymer, Extracellular Matrix, Quartz Crystal Microbalance (QCM)]

Yu, Xiaofan, et al. “Whole-bacterium SELEX of DNA aptamers for rapid detection of E. coli O157: H7 using a QCM sensor.” Journal of biotechnology 266 (2018): 39-49.
[Keywords: Whole-bacterium SELEX, DNA aptamer, E. coli O157:H7, QCM sensor]

Yang, Jin Chul, and Jin Young Park. “Surface imprinted conducting polymer patterns electrochemically grown from gold pinhole arrays on 2D inverse silica opals and their effective use in aspartame detection.” Sensors and Actuators B: Chemical 255 (2018): 463-470.
[Keywords: Surface imprinting, Electropolymerization, Colloidal lithography, Conducting polymer, Aspartame]

Lee, Youngju, and Cheolsoo Jung. “Quantitative and qualitative study on the solid electrolyte interface formed by 2-(5H) furanone: A novel additive for propylene carbonate-based lithium-ion battery electrolytes.” Electrochimica Acta 265 (2018): 662-669.
[Keywords: Lithium-ion battery, SEL, Propylene carbonate, Fluoroethylene carbonate, Furanone]

Cho, Er-Chieh, et al. “Ternary composite based on homogeneous Ni (OH) 2 on graphene with Ag nanoparticles as nanospacers for efficient supercapacitor.” Chemical Engineering Journal 334 (2018): 2058-2067.
[Keywords: Ni(OH)2, Graphene, Ag nanoparticle, Asymmetric supercapacitor, Hierarchical structure]

Matsumiya, Masahiko, et al. “Recovery of indium based on the combined methods of ionic liquid extraction and electrodeposition.” Separation and Purification Technology 201 (2018): 25-29.
[Keywords: Direct electrodeposition, Electrochemistry, IndiumIonic liquids, Solvent extraction]

Chen, Gao, et al. “Constructing self-standing and non-precious metal heterogeneous nanowire arrays as high-performance oxygen evolution electrocatalysts: Beyond the electronegativity effect of the substrate.” Journal of Power Sources 396 (2018): 421-428.
[Keywords: Oxygen evolution reaction, Cobalt iron oxides, Nanowire arrays, Substrates, Adsorption energy]

Yun, Yaguang, et al. “An electrodeposited molecularly imprinted quartz crystal microbalance sensor sensitized with AuNPs and rGO material for highly selective and sensitive detection of amantadine.” RSC advances 8.12 (2018): 6600-6607.

Survila, Arvydas, Stase Kanapeckaite, and Laurynas Staisiunas. “Electrochemical processes in weakly acid solutions containing Cu(II)-glycine complexes.” Electrochimica Acta 259 (2018): 1045-1052.
[Keywords: Copper, Glycine, Voltammetry, Electroreduction, Kinetics]

Adiguezel, Zueliyet, and Mustafa Anik. “Dissolution behavior of electrodeposited Ni-W alloys.” Protection of Metals and Physical Chemistry of Surfaces 54.2 (2018): 316-324.
[Keywords: Ni-W alloy coating, electrodeposited film, EDS, EQCM]

Alemu, Tibebu, et al. “In operando measurements of kinetics of solid electrolyte interphase formation in lithium-ion batteries.” Journal of Power Sources 400 (2018): 426-433.
[Keywords: Surface plasma resonance, Quartz crystal microbalance, Solid electrolyte interphase, In-operando, Lithium ion battery]

Pan, Mingfei, et al. “Reproducible molecularly imprinted QCM sensor for accurate, stable, and sensitive detection of enrofloxacin residue in animal-derived foods.” Food analytical methods 11.2 (2018): 495-503.
[Keywords: Enrofloxacin, Molecularly imprinted QCM sensor, Animal-derived foods]

Li, Dujuan, et al. “Real-time tau protein detection by sandwich-based piezoelectric biosensing: exploring tubulin as a mass enhancer.” Sensors 18.4 (2018): 946.
[Keywords: tau protein, Alzheimer’s disease, quartz crystal balance (QCM), immunosensor, tubulin, cerebrospinal fluid]

Sievers, Phillipp, et al. “Use of torsional resonators to monitor electroactive biofilms.” Biosensors and Bioelectronics 110 (2018): 225-232.
[Keywords: Quartz crystal microbalance, Whole-cell-based biosensing, Biofilms, Geobacter, Acoustic sensors, Biofuel cell]

Thomas, Shibin, et al. “Role of electrochemical process parameters on the electrodeposition of silicon from 1-butyl-1-methylpyrrolidinium bis (trifluoromethanesulfonyl) imide ionic liquid.” Electrochimica Acta 265 (2018): 166-174.
[Keywords: Electrodeposition, Ionic liquid, Silicon, Growth parameters]

Fernandez-Barcia, Monica, et al. “Electrodeposition of manganese layers from sustainable sulfate based electrolytes.” Surface and Coatings Technology 334 (2018): 261-268.
[Keywords: Mn electrodeposition, pH control, Sustainable electrolyte, (NH4)2SO4, GD-OES, XPS]

Hildebrandt, Thibaud, et al. “Fast Chemical Bath Deposition Process at Room Temperature of ZnS-Based Materials for Buffer Application in High-Efficiency Cu (In, Ga) Se 2-Based Solar Cells.” IEEE Journal of Photovoltaics 8.6 (2018): 1862-1867.
[Keywords: Cd-free, chemical bath deposition (CBD), Cu(In,Ga)Se2(CIGSe)-based solar cells, Zn(S,O) buffer layer]

Tatara, Ryoichi, et al. “Tuning NaO2 Cube Sizes by Controlling Na+ and Solvent Activity in Na-O2 Batteries.” The Journal of Physical Chemistry C 122.32 (2018): 18316-18328.

Tsang, Chu F., et al. “Potential-Dependent Adsorption of CO and Its Low-Overpotential Reduction to CH3CH2OH on Cu(511) Surface Reconstructed from Cu (pc): Operando Studies by Seriatim STM-EQCN-DEMS.” Journal of The Electrochemical Society 165.15 (2018): J3350-J3354.
[Keywords: Surface Science, Electrochemical quartz crystal nanobalance, Potential-dependence of CO adsorption on Cu(511) in KOH, Seriatim STM-EQCN-DEMS]

Qiu, Xiuzhen, et al. “Preparation of a molecularly imprinted sensor based on quartz crystal microbalance for specific recognition of sialic acid in human urine.” Analytical and bioanalytical chemistry 410.18 (2018): 4387-4395.
[Keywords: Sialic acid (SA), Quartz crystal microbalance (QCM), Molecularly imprinted polymer (MIP), Sensor]

Takei, Chihiro, et al. “Sugar-responsive layer-by-layer film composed of phenylboronic acid-appended insulin and poly (vinyl alcohol).” Chemical and Pharmaceutical Bulletin 66.4 (2018): 368-374.
[Keywords: layer-by-layer, phenylboronic acid, insulin, sugar response, smart material]

Charron, Alexia, et al. “Electropolymerization and characterization of ionic diffusion in poly (diphenyldithieno [3, 2‐b; 20, 30‐d] thiophene).” Polymer International 67.6 (2018): 684-690.
[Keywords: electronic conducting polymer, E-QCM, EIS, ionic diffusion]

Pan, Mingfei, et al. “Reproducible molecularly imprinted piezoelectric sensor for accurate and sensitive detection of ractopamine in swine and feed products.” Sensors 18.6 (2018): 1870.
[Keywords: ractopamine, molecularly imprinted piezoelectric sensor, swine and feed samples, quantitative detection]

Wu, Zheng-Wei, et al. “Dendritic Pt shells coated on concave Pd nanocrystals: synthesis and use as electrocatalysts for acidic oxygen reduction reaction.” International Journal of Hydrogen Energy 43.49 (2018): 22195-22204.
[Keywords: High-index facets, Seed-growth method, Core-shell, Tafel plots, Rotating ring disk electrode]

Matsuguchi, Masanobu, and Shinnosuke Fujii. “HCl Gas Sensor Coating Based on Poly (N-isopropylacrylamide) Nanoparticles Prepared from Water-Methanol Binary Solvent.” Sensors 18.10 (2018): 3283.
[Keywords: poly(N-isopropylacrylamide), cononsolvency; nanoparticle, HCl gas sensor, quartz crystal microbalance (QCM)]

Tomita, Kentaro, Hidenori Noguchi, and Kohei Uosaki. “Effect of Water and HF on the Distribution of Discharge Products at Li-O2 Battery Cathode.” ACS Applied Energy Materials 1.7 (2018): 3434-3442.

Huang, Ximing, et al. “Probing Qualitative Change in Intermolecular Forces from Hydrogen Bonding to Electrostatic Interaction on the Surface of Self-Assembled Monolayer.” Journal of The Electrochemical Society 165.5 (2018): H240-H246.
[Keywords: hydrogen bonding, intermolecular force, SAM]

Liu, Chuanjun, et al. “Preparation of molecularly imprinted polymer nanobeads for selective sensing of carboxylic acid vapors.” Analytica chimica acta 1010 (2018): 1-10.
[Keywords: Molecularly imprinted polymer, Quartz crystal microbalance, Nanobeads, Sensor array, Carboxylic acid vapor, Human body odor]

Wang, Hong, et al. “Rapid and sensitive detection of Campylobacter jejuni in poultry products using a nanoparticle-based piezoelectric immunosensor integrated with magnetic immunoseparation.” Journal of food protection 81.8 (2018): 1321-1330.
[Keywords: Campylobacter jejuni detection, Gold nanoparticle, Immunoseparation, Magnetic nanobead, Poultry products, Quartz crystal microbalance immunosensor]

Huo, Zhaohui, et al. “Photovoltaic properties of supramolecular assemblies obtained by incorporation of Preysler’s type polyoxometalate in a polycationic copolymer of porphyrin.” Electrochimica Acta 274 (2018): 177-191.
[Keywords: Electropolymerization, Photocurrent, ESI, EQCM, Porphyrin, Polyoxometalate]

Yan, Zhenhua, et al. “Anion insertion enhanced electrodeposition of robust metal hydroxide/oxide electrodes for oxygen evolution.” Nature communications 9.1 (2018): 1-9.

Yu, Xiaofan. “Rapid and Sensitive Detection of Escherichia coli O157: H7 Using a QCM Sensor based on Aptamers Selected by Whole-Bacterium SELEX and a Multivalent Aptamer System.” (2018).

Daiko, Yusuke, et al. “Palm-Sized Ag+ Ion Emission Gun Operated at Room Temperature in Non‐Vacuum Atmosphere.” Advanced Engineering Materials 20.9 (2018): 1800198.
[Keywords: electrolyte, glass, ion conductivity, ion emission, silver iodide]

Elouarzaki, Kamal, et al. “Coupling orientation and mediation strategies for efficient electron transfer in hybrid biofuel cells.” Nature Energy 3.7 (2018): 574-581.

芹澤信幸, and 片山靖. “電気化学 QCM によるイオン液体中における金属析出・溶解反応の解析.” 表面技術 69.1 (2018): 10-15.
[Keywords: Quartz Crystal Microbalance, Electroplating, Ionic Liquid]

坂本純樹, et al. “界面活性剤濃度の変化による固体表面への氷の付着力の制御 (ガラス試験板を使用した場合).” 熱工学コンファレンス講演論文集 2018. 一般社団法人 日本機械学会, 2018.

武井千弥. ポリボロン酸と水溶性高分子間の相互作用を評価する実験系とそれを用いたボロン酸修飾インスリンの放出制御の評価に関する基礎的研究. Diss. 城西大学, 2018.


Asai, Takahiro, et al. “Redox of ferrocenylthiol SAMs in electrolytes with bis [(trifluoromethyl) sulfonyl] amide as unique anions: Parallel between aqueous and ionic liquid media.” Journal of Electroanalytical Chemistry 795 (2017): 75-80.
[Keywords: Self-assembled monolayers, Ferrocenyl alkanethiol, Redox properties, Bis[(trifluoromethyl)sulfonyl]amide anion, Electrochemical QCM]

Jee, Hyung-Woo, et al. “Electrodeposition of cobalt selenide thin films: an electrochemical quartz crystal microgravimetry study.” Journal of The Electrochemical 164.13 (2017): D861-D866.
[Keywords: semiconductor, solar energy conversion, water splitting]

Shen, Haibo, Tiean Zhou, and Jiajin Hu. “A high-throughput QCM chip configuration for the study of living cells and cell-drug interactions.” Analytical and bioanalytical chemistry 409.27 (2017): 6463-6473.
[Keywords: Quartz crystal microbalance, High-throughput, Cell phenotype, Viscoelasticity, H9C2 cardiomyoblasts, Cell-drug interactions]

Wang, Lai-Hao. “Determining Estragole (4-allylanisole) Vapor of Essential Oil Using Polymer Membranes, ATR-FTIR Spectroscopy, and QCM.” Current Analytical Chemistry 13.6 (2017): 524-531.
[Keywords: ATR-FTIR, Estragole (4-allylanisole) vapor, QCM, adsorption, polymer membranes, therapeutic agents]

Huang, Hao, et al. “Synthesis and characterization of poly-3-((2, 5-hydroquinone) vinyl)-1 H-pyrrole: investigation on backbone/pendant interactions in a conducting redox polymer.” Physical Chemistry Chemical Physics 19.16 (2017): 10427-10435.

Li, Yanbin, and Ronghui Wang. “Aptasensors for detection of avian influenza virus H5N1.” Biosensors and Biodetection. Humana Press, New York, NY, 2017. 379-402.
[Keywords: Aptamer, Aptasensor, Avian influenza virus H5N1, Surface plasmon resonance, Quartz crystal microbalance, Electrochemical transducer]

Fang, Guozhen, et al. “Development and application of molecularly imprinted quartz crystal microbalance sensor for rapid detection of metolcarb in foods.” Sensors and Actuators B: Chemical 251 (2017): 720-728.

Wang, Lijun, et al. “QCM-based aptamer selection and detection of Salmonella typhimurium.” Food chemistry 221 (2017): 776-782.
[Keywords: Metolcarb, Molecular imprinted polymer, Quartz crystal microbalance sensor]

Tulodziecki, Michal, et al. “Catalytic reduction of TFSI-containing ionic liquid in the presence of lithium cations.” Electrochemistry Communications 77 (2017): 128-132.
[Keywords: Double layer, Ionic liquids, SEI, EQCM, Lithium, XPS]

Cho, Er-Chieh, et al. “The effect of wetting property on electrochromic properties offunctionalized poly (3, 4-ethylenedioxythiophene) films.” Dyes and Pigments 145 (2017): 95-102.

Hong, Sujik, et al. “Anion dependent CO/H2 production ratio from CO2 reduction on Au electro-catalyst.” Catalysis Today 295 (2017): 82-88.
[Keywords: CO2 reduction, Au catalyst, Anion, Specific adsorption, CO/H2 production ratio]

Wang, Ronghui, et al. “A nanowell-based QCM aptasensor for rapid and sensitive detection of avian influenza virus.” Sensors and Actuators B: Chemical 240 (2017): 934-940.
[Keywords: Nanowell-based electrode, Quartz crystal microbalance, Aptasensor, Virus detection, Avian influenza]

Zheng, Qing, et al. “Electrochemical quantification of intermolecular hydrogen bonding between ferrocenemethanol and 3-mercaptopropanoic acid on gold.” The Journal of Physical Chemistry C 121.40 (2017): 22123-22129.

Yuan, Min, et al. “Aptasensor for lead(II) based on the use of a quartz crystal microbalance modified with gold nanoparticles.” Microchimica Acta 184.5 (2017): 1397-1403.
[Keywords: Determination of lead ion, Aptamer, Piezoelectric biosensor, Gold nanoparticles, Signal amplification]

Yagi, Shunsuke, et al. “Framework Structures for Mg Battery Cathodes.” Materials Science Forum. Vol. 879. Trans Tech Publications, 2017.
[Keywords: Active Material, Cathode, Electrochemical QCM, Framework Structure, Mg Battery]

Zhang, Tianshi, and Igor Zhitomirsky. “Strategies for electrosynthesis of poly (vinylbenzyltrimethylammonium chloride) and composite films.” Materials and Manufacturing Processes 32.4 (2017): 404-408.
[Keywords: Charge, composite, electrodeposition, electrosynthesis, heterocoagulation, polyelectrolyte, polymer, zirconia]

Rodriguez, Luz Maria Torres, et al. “Electrochemical and electrogravimetric studies of the deposition and catalysis of capsaicin in polyaniline: A preliminary study of the determination of chili hotness.” Synthetic Metals 223 (2017): 153-165.
[Keywords: Chili hotness determination, Polyaniline, Electromicrogravimetry, Capsaicin immobilization]

Betelu, Stephanie, et al. “Linear sweep voltammetry coupled to a quartz crystal microbalance for investigating the catalytic activity of the Mg(II)-water electrochemical system and managing the Mg oxy-hydroxide hydration state.” Electrochemistry Communications 84 (2017): 45-49.
[Keywords: Mg(II)-water electrochemical system, Mg oxy-hydroxide, Catalysis, Hydration content]

Leistner, Karin, et al. “Role of hydrogen evolution during epitaxial electrodeposition of Fe on GaAs.” Journal of The Electrochemical Society 165.4 (2017): H3076.

Mukouyama, Yoshiharu, Yoshitaka Fukuda, and Takashi Nishimura. “A Simple Electrochemical Method for Preparing Gold Nanoparticles on Graphite.” ECS Transactions 80.10 (2017): 1425-1431.

Yi, Chenxi, et al. “Study on the Initial Atmospheric Corrosion Behavior of Copper in Chloride-Containing Environments.” Int J Electrochem Sci 12 (2017): 3597-3613.
[Keywords: Copper, Electrochemical noise, Fast wavelet transform technique, Atmospheric corrosion]

Liu, Chuanjun, et al. “Molecularly imprinted sol-gel-based QCM sensor arrays for the detection and recognition of volatile aldehydes.” Sensors 17.2 (2017): 382.
[Keywords: molecularly imprinted sol-gel, QCM sensor array, aldehyde biomarker, sensor array optimization]

Zhao, Fu, et al. “The Induced Electrochemical Codeposition of Cu-Ge Alloy Films.” Journal of The Electrochemical Society 164.6 (2017): D354-D361.
[Keywords: Cu-Ge codeposition, electrochemical quartz crystal microbalance, interconnects, ordered copper germanide]

Lee, Sun Hyeok, and Soo Suk Lee. “Electrochemical Quantitative Analysis of Nucleic Acids Using beta-Cyclodextrin Modified Gold Electrode.” Electroanalysis 29.4 (2017): 1166-1171.
[Keywords: Electrochemical Analysis, beta-Cyclodextrin, Self-assembled monolayer (SAM), Ferrocene, DNA Hybridization]

Matsuguchi, Masanobu, and Ai Tada. “Fabrication of poly (N-isopropylacrylamide) nanoparticles using a simple spray-coating method and applications for a QCM-based HCl gas sensor coating.” Sensors and Actuators B: Chemical 251 (2017): 821-827.
[Keywords: Poly(N-isopropylacrylamide), Nanoparticle, Spray-coating, HCl gas sensor, Quartz crystal microbalance (QCM)]

Iijima, Kazutoshi, et al. “Effect of protein adsorption layers and solution treatments on hydroxyapatite deposition on polystyrene plate surfaces in simulated body fluids.” Journal of Materials Science: Materials in Medicine 28.12 (2017): 193.

Liu, Zhe-Ting, Ho-Rei Chen, and Chien-Liang Lee. “Promising activity of concave Pd@ Pd-Pt nanocubes for the oxygen reduction reaction.” Electrochimica Acta 226 (2017): 1-9.
[Keywords: defective effect, rotating ring disk electrode, HAADF-STEM]

Tokue, Hiroshi, et al. “Charge-discharge with rocking-chair-type Li+ migration characteristics in a zwitterionic radical copolymer composed of TEMPO and trifluoromethanesulfonylimide with carbonate electrolytes for a high-rate Li-ion battery.” Macromolecules 50.5 (2017): 1950-1958.

Hildebrandt, Thibaud, et al. “Use of a New Organic Complexing and Buffer Agent for Zn (S,O) Deposition for High-Efficiency Cu (In, Ga) Se 2-Based Solar Cells.” IEEE Journal of Photovoltaics 8.1 (2017): 266-271.

Kim, Jutae, and Gregory Jerkiewicz. “Influence of the surface roughness of platinum electrodes on the calibration of the electrochemical quartz-crystal nanobalance.” Analytical chemistry 89.14 (2017): 7462-7469.

Yang, Chia-Chen, et al. “Shell-thickness-controlled synthesis of core-shell Pd@ Pt nanocubes and tuning of their oxygen reduction activities.” Journal of The Electrochemical Society 164.2 (2017): H112.

Acharya, Biplav, et al. “Quartz crystal microbalance apparatus for study of viscous liquids at high temperatures.” Review of Scientific Instruments 88.2 (2017): 025112.

Chen, Gao, et al. “Two orders of magnitude enhancement in oxygen evolution reactivity on amorphous Ba0.5Sr0.5Co0.8Fe0.2O3-delta nanofilms with tunable oxidation state.” Science advances 3.6 (2017): e1603206.

清田佳美, and 後藤健彦. “キャスト高分子膜の乾燥プロセスにおける粘弾性およびサーモグラフ.” 東洋大学紀要. 自然科学篇= Journal of Toyo University. 東洋大学自然科学研究室 編 61 (2017): 97-103.
[キーワード: Polymer dry cast, QCM, Thermograph, Viscoelasticity]

Chira, Ana, Bogdan Bucur, and Gabriel-Lucian Radu. “Electrodeposited Organic Layers Formed from Aryl Diazonium Salts for Inhibition of Copper Corrosion.” Materials 10.3 (2017): 235.
[Keywords: copper, diazonium salts, quartz crystal microbalance, Tafel polarization, electrochemical noise]

Sugimoto, Yu. “Development of Electrostatic and Three-Dimensional Random Orientation Models for Enzyme-Electrode Interfaces in Direct Electron Transfer-Type Bioelectrocatalysis.” (2017).

Kim, Jutae, et al. “Interfacial structure of atomically flat polycrystalline Pt electrodes and modified Sauerbrey equation.” Physical Chemistry Chemical Physics 19.33 (2017): 21955-21963.

Aralekallu, Shambhulinga, et al. “Tuning the Interfacial Chemistry of Redox‐Active Polymer for Bifunctional Probing.” ChemElectroChem 4.3 (2017): 692-700.

Kim, Jutae. Comprehensive Study of the Influence of Surface Roughness of Platinum Electrodes on their Interfacial Mass Changes as Examined Using the Electrochemical Quartz-Crystal Nonobalance. Diss. 2017.


Seo, Eunyong. “Double hydrophilic Block Copolymer-Templated Nanoparticle and Energy Application.” (2017).


Zhou, Tiean, et al. “Real-time monitoring of contractile properties of H9C2 cardiomyoblasts by using a quartz crystal microbalance.” Analytical methods 8.3 (2016): 488-495.

Melashvili, Mariam, David Dreisinger, and Yeonuk Choi. “Cyclic voltammetry responses of gold electrodes in thiosulphate electrolyte.” Minerals Engineering 92 (2016): 134-140.
[Keywords: Gold oxidation and reduction in thiosulphate, Voltammogram, Peak current, Irreversibility]

Sasaya, Naoko, et al. “Investigation into applicability of EQCM methods at elevated temperature for ionic liquids.” Electrochimica Acta 194 (2016): 304-309.
[Keywords: EQCM methods, Elevated temperature, Ionic liquids, Neodymium]

Cui, Shaoqing, et al. “Fabrication of a sensitive gas sensor based on PPy/TiO2 nanocomposites films by layer-by-layer self-assembly and its application in food storage.” Sensors and Actuators B: Chemical 233 (2016): 337-346.
[Keywords: Nanostructure, Polypyrrole/titanium dioxide, Nanocomposite, Quartz crystal microbalance, Gas sensor]

Ota, Hisashi, et al. “Investigation of electrodeposition behavior for Nd(III) in [P2225][TFSA] ionic liquid by EQCM methods with elevated temperatures.” Electrochimica Acta 222 (2016): 20-26.
[Keywords: Electrodeposition, EQCM methods, Ionic liquid, Neodymium metal]

Wang, Lai-Hao, and Shih-Ting Chen. “Electrocatalytical Behavior of Corticosteroids at Graphene Oxide Modified Platinum Electrode and Its Determination in Cosmetics and Pharmaceuticals.” Sensor Letters 14.2 (2016): 198-204.
[Keywords: Corticosteroids, Cosmetics, Graphene oxide modified platinum electrode, Pharmaceuticals]

Menanteau, Thibaud, et al. “Electrografting via diazonium chemistry: the key role of the aryl substituent in the layer growth mechanism.” The Journal of Physical Chemistry C 120.8 (2016): 4423-4429.

Hwang, Boyeong, Eun-Suok Oh, and Ketack Kim. “Observation of electrochemical reactions at Zn electrodes in Zn-air secondary batteries.” Electrochimica Acta 216 (2016): 484-489.
[Keywords: Zn-air batterya, node reactions, electrolyte]

Fang, Guozhen, et al. “Development and application of a quartz crystal microbalance sensor based on molecularly imprinted sol-gel polymer for rapid detection of patulin in foods.” Sensors and Actuators B: Chemical 237 (2016): 239-246.
[Keywords: Patulin, Quartz crystal microbalance sensor, Molecularly imprinted polymer, Sol-gel]

Ahn, Kwang-Soo, et al. “Luminol chemiluminescence biosensor for glycated hemoglobin (HbA1c) in human blood samples.” Biosensors and Bioelectronics 75 (2016): 82-87.
[Keywords: Glycated hemoglobin, Boronic acid, Luminol, Chemiluminescence,Diabetes]

Ata, M. S., and I. Zhitomirsky. “Electrochemical deposition of composites using deoxycholic acid dispersant.” Materials and Manufacturing Processes 31.1 (2016): 67-73.
[Keywords: Acid, Bile, Carbon, Composite, Dispersant, Electrodeposition, Manganese, Nanotube, Supercapacitor]

Fang, Guozhen, et al. “Quartz crystal microbalance sensor based on molecularly imprinted polymer membrane and three-dimensional Au nanoparticles@mesoporous carbon CMK-3 functional composite for ultrasensitive and specific determination of citrinin.” Sensors and Actuators B: Chemical 230 (2016): 272-280.
[Keywords: Quartz crystal microbalance sensor, Molecularly imprinted polymer, Citrinin, Au nanoparticles@mesoporous carbon CMK-3]

Chao, Yi-Ju, et al. “Seed-mediated growth of Ag nanocubes and their size-dependent activities toward oxygen reduction reaction.” International Journal of Hydrogen Energy 41.6 (2016): 3896-3903.
[Keywords: Rotating ring-disk electrode, Tafel slope, Electron transfer number, Electron diffraction pattern, XRD, High-angle annular dark-field]

Ata, Mustafa S., Patrick Wojtal, and Igor Zhitomirsky. “Electrophoretic deposition of materials using humic acid as a dispersant and film forming agent.” Colloids and Surfaces A: Physicochemical and Engineering Aspects 493 (2016): 74-82.
[Keywords: Humic acid, Electrophoretic deposition, O xide, Mineral, Metal, Carbon nanotube, Supercapacitor]

Du, Xiao, et al. “A novel electroactive lambda-MnO2/PPy/PSS core-shell nanorod coated electrode for selective recovery of lithium ions at low concentration.” Journal of Materials Chemistry A 4.36 (2016): 13989-13996.

Itaya, Hayato, et al. “Electrochemical quartz crystal microbalance study of high-rate Pt dissolution in H2O2-containing H2SO4 solution with Fe2+ ion.” International Journal of Hydrogen Energy 41.1 (2016): 534-542.
[Keywords: Pt dissolution, H2O2Fe2+, Electrochemical quartz crystal microbalance, Polymer electrolyte fuel cells]

Kamachi, Yuichiro, et al. “Hydrogels containing Prussian blue nanoparticles toward removal of radioactive cesium ions.” Journal of nanoscience and nanotechnology 16.4 (2016): 4200-4204.
[Keywords: Cesium Ions, Coordination Polymers, Hydrogels, Nanoparticles, Prussian Blue]

Tokuyama, Hideaki, Eri Kitamura, and Yoshimi Seida. “Detection of Au (III) ions using a poly (N, N-dimethylacrylamide)-coated QCM sensor.” Talanta 146 (2016): 507-509.
[Keywords: QCM sensor, Au(III) ion, Polymer, Gel, Adsorption, Poly(N,N-dimethylacrylamide)]

Ahn, Kwang-Soo, et al. “Fluorescence energy transfer inhibition bioassay for cholera toxin based on galactose-stabilized gold nanoparticles and amine-terminated quantum dots.” Microchemical Journal 124 (2016): 9-14.
[Keywords: Cholera toxin, FRETGold nanoparticle, Quantum dot, Galactose]

Hildebrandt, Thibaud, et al. “A better understanding of Cbd-Zn (S,O) using hydrogen peroxide as an additive.” Thin Solid Films 619 (2016): 25-32.
[Keywords: Thin films, Chemical bath deposition, Photovoltaic devices, Cadmium-free buffer layer, Copper indium gallium selenide, Hydrogen peroxide]

Park, Jin Young. “Effect of lithographically designed structures on the caffeine sensing properties of surface imprinted films.” Analyst 141.20 (2016): 5709-5713.

Ye, Jyun-Sian, et al. “Heterostructured palladium-platinum core-shell nanocubes for use in a nonenzymatic amperometric glucose sensor.” Microchimica Acta 183.12 (2016): 3311-3320.
[Keywords: Core-shell catalysts, Platinum nanoparticles, Nafion, Glucose oxidation reaction, Layer-by-layer deposition, High-angle annular dark-field TEM, Line-scanned EDX, Cyclic voltammetry, Amperometry, Serum analysis]

Liu, Yangshuai, et al. “Universal dispersing agent for electrophoretic deposition of inorganic materials with improved adsorption, triggered by chelating monomers.” Journal of colloid and interface science 462 (2016): 1-8.
[Keywords: Polymer, Oxide, Nitride, Metal, Clay, Electrophoretic deposition, Composite, Chelate]

Wojtal, P., and I. Zhitomirsky. “Surface modification and electrophoretic deposition of materials using 2,2′-biquinoline-4,4′-dicarboxylic acid.” Materials Letters 174 (2016): 44-47.
[Keywords: Electrophoretic deposition, Zinc oxide, Titanium oxide, Dispersant, Huntite, Film]

Liang, Defu, and Giovanni Zangari. “Underpotential Codeposition of Au-Ni Alloys: The Influence of Applied Potential on Phase Separation and Microstructure.” Journal of The Electrochemical Society 163.12 (2016): D3020-D3026.
[Keywords: Alloy Thermodynamics, Au-Ni, Electrodeposition of Alloys, Nanoscale Phase Separation, Underpotential Codeposition]

Leinartas, Konstantinas, et al. “Mg-Nb alloy films: Structure and stability in a balanced salt solution.” Journal of Alloys and Compounds 661 (2016): 322-330.
[Keywords: Metalls and alloys, Vapour deposition, Corrosion, SEM, Photoelectron spectroscopies]

Porcher, Marina, et al. “Electrochemical deposition and characterization of polypyrrole in electrolyte based on pyrrolidinium hydrogenosulfate protic ionic liquid.” Journal of Applied Electrochemistry 46.11 (2016): 1133-1145.
[Keywords: Polypyrrole, Protic ionic liquid, Electrochemical polymerization, Capacitance]

Kanasaki, Yu, Yasuyuki Kobayashi, and Keiko Gotoh. “Application of quartz crystal microbalance as a tool for detergency evaluation of fatty acid contamination in aqueous systems.” Journal of oleo science 65.10 (2016): 835-842.
[Keywords: quartz crystal microbalance, stearic acid, Langmuir-Blodgett method, atmospheric pressure plasma, detergency]

Zheng, Qing, et al. “The long-range effect induced by untying hydrogen bonds for single cell test using SECM.” Electrochimica Acta 207 (2016): 135-142.
[Keywords: Scanning electrochemical microscopy, Hydrogen bonds, Self-assembled monolayer, Long-range effect]

Kim, Jutae, et al. “Limits of detection and quantification of electrochemical quartz-crystal nanobalance in platinum electrochemistry and electrocatalysis research.” Analytical chemistry 88.21 (2016): 10599-10604.

Liu, Li-Shang, Jong-Min Kim, and Woo-Sik Kim. “Quartz crystal microbalance technique for in situ analysis of supersaturation in cooling crystallization.” Analytical chemistry 88.11 (2016): 5718-5724.

Karimi, Shima, and Akram Alfantazi. “Bovine Serum Albumin Adsorption on AISI 316L in Phosphate-Buffered Saline Solutions.” NACE International Corrosion Conference Proceedings. NACE International, 2016.
[Keywords: ion release, cyclic voltammetry, stainless steel, Quartz crystal microbalance, bovine serum albumin]

Jha, Sunil Kr. “Molecular Imprinted Polymers for Sensing of Volatile Organic Compounds in Human Body Odor.” Advanced Molecularly Imprinting Materials (2016): 561-636.
[Keywords: MIP, QCM, pattern recognition, VOC identification, human body odor]

Kanasaki, Yu, Yasuyuki Kobayashi, and Keiko Gotoh. “Dynamic analysis of the removal of fatty acid from a PET surface using a quartz crystal microbalance.” Journal of Surfactants and Detergents 19.3 (2016): 627-636.
[Keywords: Interfacial science, Application of surfactants, Analytical chemistry and techniques]

Yang, Jin Chul, and Jin Young Park. “Polymeric colloidal nanostructures fabricated via highly controlled convective assembly and their use for molecular imprinting.” ACS applied materials & interfaces 8.11 (2016): 7381-7389.
[Keywords: colloidal lithography, atrazine, poly(MAA-EGDMA), molecularly imprinted polymer, photopolymerization]

Tutodziecki, Michal, et al. “Non-Equilibrium Ionic Liquid-Electrode Interface at Elevated Temperature and Its Influence on Co2+ Reduction Process.” Journal of The Electrochemical Society 163.8 (2016): D355-D365.
[Keywords: Cobalt deposition, Double Layer, EDL reconstruction, Electrodeposition, EQCM, impedance, Ionic liquids, Non-equilibrium]

Morita-Imura, Clara, et al. “Stimuli-Responsive Extraction and Ambidextrous Redispersion of Zwitterionic Amphiphile-Capped Silver Nanoparticles.” Langmuir 32.27 (2016): 6948-6955.

外山吉治. “水晶振動子マイクロバランス(QCM)法を用いたフィブリン重合過程の測定.” 繊維学会誌 72.10 (2016): P-472.

McMath, Ashley A., et al. “Identification and analysis of electrochemical instrumentation limitations through the study of platinum surface oxide formation and reduction.” Analytical chemistry 88.6 (2016): 3136-3143.

Mei, May Lei, Quan-Li Li, and Chun Hung Chu. “Inhibition of cariogenic plaque formation on root surface with polydopamine-induced-polyethylene glycol coating.” Materials 9.6 (2016): 414.
[Keywords: root caries, polydopamine, polyethylene, dentine, biofouling]

Zhang, Tianshi. Master’s thesis of Tianshi Zhang. Diss. 2016.

Kwabi, David Gator. Electrochemical studies of oxygen reduction for aprotic lithium-oxygen batteries. Diss. Massachusetts Institute of Technology, 2016.

Liu, Yangshuai. Fabrication of Composite Electrodes and Supercapacitor Devices. Diss. 2016.


Stankeviciene, Ina, et al. “Electroless Co-B Deposition Using Dimethylamine Borane as Reducing Agent in the Presence of Different Amines.” ECS Transactions 64.30 (2015): 17-24.

Liu, Li-Shang, Jong-Min Kim, and Woo-Sik Kim. “Simple and reliable quartz crystal microbalance technique for determination of solubility by cooling and heating solution.” Analytical chemistry 87.6 (2015): 3329-3335.

Sugimoto, Yu, et al. “Electrostatic interaction between an enzyme and electrodes in the electric double layer examined in a view of direct electron transfer-type bioelectrocatalysis.” Biosensors and Bioelectronics 63 (2015): 138-144.
[Keywords: Electric field, Electric double layer, Direct electron transfer, Orientation, Denaturation]

Yagi, Shunsuke, et al. “EQCM analysis of redox behavior of CuFe Prussian blue analog in mg battery electrolytes.” Journal of The Electrochemical Society 162.12 (2015): A2356-A2361.
[Keywords: Active material, EQCM, Hydration, Mg battery, Prussian blue analog]

Ata, M. S., and I. Zhitomirsky. “Colloidal methods for the fabrication of carbon nanotube-manganese dioxide and carbon nanotube-polypyrrole composites using bile acids.” Journal of colloid and interface science 454 (2015): 27-34.
[Keywords: Bile acid, Dispersant, Electrophoretic deposition, Composite, Carbon nanotube, Manganese dioxide, Polypyrrole, Supercapacitor]

Hildebrandt, Thibaud, et al. “Toward a Better Understanding of the Use of Additives in Zn (S, O) Deposition Bath for High-Efficiency Cu (In, Ga) Se 2-Based Solar Cells.” IEEE Journal of Photovoltaics 5.6 (2015): 1821-1826.
[Keywords: Alternative buffer layer, chemical bath deposition (CBD) Zn(S,O), Cu(In,Ga)Se2 (CIGSe) photovoltaics]

Huo, Zhaohui, et al. “Synthesis and characterization of Lindqvist-type polyoxometalate-porphyrin copolymers.” Electrochimica Acta 179 (2015): 326-335.
[Keywords: copolymer, polyoxometalate, porphyrin, electropolymerization, EQCM]

Lee, Soojeong, et al. “Geometry-controllable graphene layers and their application for supercapacitors.” ACS applied materials & interfaces 7.15 (2015): 8070-8075.
[Keywords: graphene, geometry control, polystyrene sulfonate (PSS), supercapacitor]

Serizawa, Nobuyuki, et al. “Electrochemical quartz crystal microbalance measurement of a Li4Ti5O12 composite electrode in a carbonate electrolyte.” Journal of Power Sources 295 (2015): 162-166.
[Keywords: Lithium battery, EQCM, Lithium titanium oxide, Local viscosity]

Furuya, Ryota, et al. “Deposition and dissolution of lithium through lithium phosphorus oxynitride thin film in some ionic liquids.” Journal of The Electrochemical Society 162.9 (2015): H634-H637.
[Keywords: deposition, ionic liquid, LiPON, lithium, solid-electrolyte interphase]

Sugimoto, Yu, et al. “Role of 2-mercaptoethanol in direct electron transfer-type bioelectrocatalysis of fructose dehydrogenase at Au electrodes.” Electrochimica Acta 170 (2015): 242-247.
[Keywords: direct electron transfer, fructose dehydrogenase, 2-mercaptoethanol, reductive desorption]

Shi, Kaiyuan, and Igor Zhitomirsky. “Influence of chemical structure of dyes on capacitive dye removal from solutions.” Electrochimica Acta 174 (2015): 588-595.
[Keywords: capacitor, water purification, dye removal, cell, activated carbon, polypyrrole]

Iijima, Kazutoshi, et al. “Control of biomimetic hydroxyapatite deposition on polymer substrates using different protein adsorption abilities.” Colloids and Surfaces B: Biointerfaces 130 (2015): 77-83.
[Keywords: Hydroxyapatite, Simulated body fluid, Polystyrene, Poly(methyl methacrylate), Serum protein]

Shi, Kaiyuan, and Igor Zhitomirsky. “Electrodeposition of carbon nanotubes triggered by cathodic and anodic reactions of dispersants.” Materials and Manufacturing Processes 30.6 (2015): 771-777.
[Keywords: Carbon, Dispersion, Dye, Electrodeposition, Film, Nanotube]

Liu, Ying, et al. “Real-time monitoring of electrochemically active biofilm developing behavior on bioanode by using EQCM and ATR/FTIR.” Sensors and Actuators B: Chemical 209 (2015): 781-789.
[Keywords: Electrochemically active biofilm, Biofilm formation, Cell biomass, EQCM, ATR/FTIR, Microbial fuel cell]

Shi, Kaiyuan, and Igor Zhitomirsky. “Supercapacitor devices for energy storage and capacitive dye removal from aqueous solutions.” RSC Advances 5.1 (2015): 320-327.

Pan, Mingfei, et al. “Molecularly imprinted biomimetic QCM sensor involving a poly (amidoamine) dendrimer as a functional monomer for the highly selective and sensitive determination of methimazole.” Sensors and Actuators B: Chemical 207 (2015): 588-595.
[Keywords: Molecularly imprinted polymer, QCM sensor, Poly(amidoamine) dendrimer, Functional monomer, Methimazole]

Huo, Zhaohui, et al. “Copolymeric films obtained by electropolymerization of porphyrins and dipyridyl-spacers including Dawson-type polyoxometalates.” Journal of Solid State Electrochemistry 19.9 (2015): 2611-2621.
[Keywords: Copolymer, Polyoxometalate, Porphyrin, Electropolymerization, EQCM]

[Keywords: Electrochemical quartz crystal microbalance (EQCM), nanocrystalline cobalt-iron alloy, pH concentration, sulphide ion]

Liu, Yangshuai, Kaiyuan Shi, and Igor Zhitomirsky. “Azopolymer triggered electrophoretic deposition of MnO 2-carbon nanotube composites and polypyrrole coated carbon nanotubes for supercapacitors.” Journal of Materials Chemistry A 3.32 (2015): 16486-16494.

Shin, Dong Seok, et al. “Direct measurement of the amount of dissociated hydrogen atoms attached on graphene.” Synthetic Metals 200 (2015): 80-84.
[Keywords: Graphene, Dissociation of H2, Mass of C-H bonds, Quartz crystal microbalance]

Liu, Huilin, et al. “A triple-dimensional sensing chip for discrimination of eight antioxidants based on quantum dots and graphene.” Biosensors and Bioelectronics 74 (2015): 313-317.
[Keywords: Triple-dimensional, Sensing chip, Quantum dots, Graphene, Lab-on-a-nanomaterial]

Matsuguchi, Masanobu, Kenta Takaoka, and Haruka Kai. “HCl gas adsorption/desorption properties of poly (N-isopropylacrylamide) brushes grafted onto quartz resonator for gas-sensing applications.” Sensors and Actuators B: Chemical 208 (2015): 106-111.
[Keywords: Poly(N-isopropylacrylamide), Polymer brush, HCl gas sensor, Quartz crystal microbalance]

Du, Xiao, et al. “A facile potential-induced in-situ ion removal trick: fabrication of high-selective ion-imprinted film for trivalent yttrium ion separation.” Electrochimica Acta 176 (2015): 1313-1323.
[Keywords: Trivalent ions, Ion exchange, Ion imprinted film, In-situ removal, Electroactive film]

Yang, Jin Chul, et al. “Lithographically patterned molecularly imprinted polymer for gravimetric detection of trace atrazine.” Sensors and Actuators B: Chemical 216 (2015): 476-481.
[Keywords: Molecularly imprinted polymer (MIP), Soft lithography, UV-initiated polymerization, Atrazine, Herbicide, Poly(MAA-EGDMA)]

Jha, Sunil K., and Kenshi Hayashi. “Polyacrylic acid polymer and aldehydes template molecule based MIPs coated QCM sensors for detection of pattern aldehydes in body odor.” Sensors and Actuators B: Chemical 206 (2015): 471-487.
[Keywords: MIP, QCM sensor, Aldehydes, Body odor characterization, Chemical vapor pattern recognition]

Cui, Shaoqing, Jun Wang, and Xinlei Wang. “Fabrication and design of a toxic gas sensor based on polyaniline/titanium dioxide nanocomposite film by layer-by-layer self-assembly.” RSC Advances 5.72 (2015): 58211-58219.

Liang, Defu, Wenbo Shao, and Giovanni Zangari. “Selection of phase formation in electroplated Ag-Cu alloys.” Journal of The Electrochemical Society 163.2 (2015): D40.
[Keywords: Ag-Cu, Alloy, Complexing, Electrodeposition, Eutectic Alloys, Phase separation, Solid solution, Supersaturated, Surface mobility]

Liu, Yangshuai, et al. “Film deposition mechanisms and properties of optically active chelating polymer and composites.” Colloids and Surfaces A: Physicochemical and Engineering Aspects 487 (2015): 17-25.
[Keywords: Electrophoretic deposition, Birefringence, Dispersant, Polymer, Nanoparticles, Supercapacitor]

Liu, Chia-Ru, et al. “Ag/Sn Nanoparticles Reduced by Tin(II) Pyrophosphate, Tin(II) Oxalate, and Tin(II) Sulfate for Catalyzing Electroless Copper Deposition.” Journal of The Electrochemical Society 162.7 (2015): D283-D290.
[Keywords: Activator, Electroless Copper Deposition]

Jha, Sunil K., and Kenshi Hayashi. “A quick responding quartz crystal microbalance sensor array based on molecular imprinted polyacrylic acids coating for selective identification of aldehydes in body odor.” Talanta 134 (2015): 105-119.
[Keywords: QCM sensor, MIP, Body odor, Aldehydes, Pattern recognition]

Chao, Yi-Ju, et al. “Activity of small silver nanocubes as activators for electroless copper deposition.” Electrochimica Acta 183 (2015): 20-26.
[Keywords: Activator, electroless copper deposition]

Yang, Chia-Chen, Ho-Rei Chen, and Chien-Liang Lee. “Sub 10-nm Pd nanocubes and their coating with multi-armed Pt shells: facile synthesis and catalysis of alkaline oxygen reduction.” Journal of The Electrochemical Society 162.8 (2015): H512-H517.
[Keywords: core-shell effect, electrocatalysis]

Xue, Chunfeng, et al. “Investigation on Nickel(II) Removal Behavior and Formation Mechanism of alpha-Zirconium Phosphate/Polyaniline Hybrid Films Electrochemically Deposited in Acetonitrile and Aqueous Solution.” Advanced Porous Materials 3.1 (2015): 21-28.
[Keywords: hybrid film, ion exchange, nickel, polyaniline, alpha-zirconium phosphate]

Gotoh, Keiko, Yu Kanasaki, and Haruka Uchinomaru. “Introduction of atmospheric pressure plasma to aqueous detergent processes.” Journal of oleo science 64.8 (2015): 817-824.
[Keywords: atmospheric pressure plasma, PET substrate, stearic acid, detergency, quartz crystal microbalance]

Sugimoto, Yu, et al. “Function of C-terminal hydrophobic region in fructose dehydrogenase.” Electrochimica Acta 176 (2015): 976-981.
[Keywords: fructose dehydrogenase, C terminal hydrophobic region, direct electron transfer]

Scarano, S., et al. “Design of a dual aptamer-based recognition strategy for human matrix metalloproteinase 9 protein by piezoelectric biosensors.” Analytica chimica acta 897 (2015): 1-9.
[Keywords: Human matrix metalloproteinase 9, Piezoelectric biosensor, Aptamer, Aptasensor, Human serum]

Bertin, Erwan, Sebastien Garbarino, and Daniel Guay. “Formic acid oxidation on antimony-covered platinum films with a preferential (100) orientation.” Journal of Power Sources 299 (2015): 315-323.
[Keywords: Electrodeposition, (100) surfaces, Formic acid oxidation, Decoration, Antimony]

Xu, Lizhou, et al. “Rapid and Label-free Detection of Avian Influenza Virus H5N1 using a Target-responsive Hydrogel based Fluorescence Aptasensor.” 2015 ASABE Annual International Meeting. American Society of Agricultural and Biological Engineers, 2015.
[Keywords: Biosensor, avian influenza, H5N1, hydrogel, quantum dots, aptamer]

Romankiw, L., et al. “Electrochemical Science and Technology: Challenges and Opportunities in the Path from Invention to Product.” The Electrochemical Society, 2015.

山田康貴, et al. “ジアリルアミン系化合物を用いた銅穴埋めめっきの検討.” エレクトロニクス実装学会誌 18.4 (2015): 245-252.
[キーワード: Copper Viafilling, Diallylamine Compound, Single Additive, Basicity]

Izarova, N. V., et al. “Tin(II)-functionalization of the archetypal {P 8 W 48} polyoxotungstate.” Dalton Transactions 44.44 (2015): 19200-19206.

Esnault, Charles, et al. “Kinetic Analysis of the Interaction of Mos1 Transposase with its Inverted Terminal Repeats Reveals New Insight into the Protein-DNA Complex Assembly.” ChemBioChem 16.1 (2015): 140-148.
[Keywords: biochemical constants, DNA cleavage, mariner transposons, mobile DNA, protein structures, transposition]

Melashvili, Mariam. Kinetics of sulphide conversion to thiosulphate and gold dissolution study by electrochemical quartz crystal microbalance. Diss. University of British Columbia, 2015.

Cheng, Xinran. Development of Biosensors to Monitor the Interaction of Small Molecules with Amyloidogenic Proteins using Optical and Electrochemical Methods. Diss. 2015.

Su, Yisong. Advanced Electrode Materials for Electrochemical Supercapacitors. Diss. 2015.


Ding, Junhui, et al. “Piezoelectric immunosensor with gold nanoparticles enhanced competitive immunoreaction technique for 2, 4-dichlorophenoxyacetic acid quantification.” Sensors and Actuators B: Chemical 193 (2014): 568-573.
[Keywords: Quartz crystal microbalance, 2,4-Dichlorophenoxyacetic acid, Competitive immunoreaction, Gold nanoparticles, Herbicide]

Yan, Ying, et al. “Environmental monitoring of acetic acid gas by thin film polyaniline sensor.” Advanced Materials Research. Vol. 864. Trans Tech Publications Ltd, 2014.

Wang, Zhongde, et al. “Enhancement of heavy metals removal efficiency from liquid wastes by using potential-triggered proton self-exchange effects.” Electrochimica Acta 130 (2014): 40-45.
[Keywords: Potential-triggered proton self-exchange, Electrochemically switched ion exchange, Copper ions, Regeneration]

Yagi, Shunsuke, et al. “EQCM analysis of redox behavior of Prussian blue in a lithium battery electrolyte.” Journal of Materials Chemistry A 2.21 (2014): 8041-8047.

Deen, I., and I. Zhitomirsky. “Electrophoretic deposition of composite halloysite nanotube-hydroxyapatite-hyaluronic acid films.” Journal of alloys and compounds 586 (2014): S531-S534.
[Keywords: Halloysite, Nanotube, Hydroxyapatite, Hyaluronic acid, Electrophoresis, Film]

Kong, Ling-Jie, et al. “Molecularly imprinted quartz crystal microbalance sensor based on poly (o-aminothiophenol) membrane and Au nanoparticles for ractopamine determination.” Biosensors and Bioelectronics 51 (2014): 286-292.
[Keywords: Quartz crystal microbalance sensor, Molecularly imprinted electrodeposited membrane, Ractopamine, Au nanoparticles]

Kim, Young-Soo, et al. “Succinonitrile as a corrosion inhibitor of copper current collectors for overdischarge protection of lithium ion batteries.” ACS applied materials & interfaces 6.3 (2014): 2039-2043.
[Keywords: overdischarge, corrosion inhibitor, succinonitrile, copper current collector, lithium ion batteries]

Dai, Jie, et al. “Development and application of quartz crystal microbalance sensor based on novel molecularly imprinted sol-gel polymer for rapid detection of histamine in foods.” Journal of agricultural and food chemistry 62.23 (2014): 5269-5274.
[Keywords: histamine, quartz crystal microbalance sensor, sol-gel, molecularly imprinted polymer]

Hudak, Nicholas S. “Chloroaluminate-doped conducting polymers as positive electrodes in rechargeable aluminum batteries.” The Journal of Physical Chemistry C 118.10 (2014): 5203-5215.

Han, Su Cheol, et al. “Non-crystalline oligopyrene as a cathode material with a high-voltage plateau for sodium ion batteries.” Journal of Power Sources 254 (2014): 73-79.
[Keywords: Pyrene, Oligomer, Cathode, Energy density, Sodium ion batteries]

Liu, Chia-Ru, et al. “1, 10-Phenanthroline as an accelerator for Ag nanoparticle-catalysed electroless copper deposition.” Applied surface science 317 (2014): 181-187.
[Keywords: Activation, Printed circuit board, XPS, XRD, EQCM]

Bastakoti, Bishnu Prasad, Nagy L. Torad, and Yusuke Yamauchi. “Polymeric micelle assembly for the direct synthesis of platinum-decorated mesoporous TiO2 toward highly selective sensing of acetaldehyde.” ACS applied materials & interfaces 6.2 (2014): 854-860.
[Keywords: micelle assembly, mesoporous TiO2, platinum, sensor, acetaldehyde, quartz crystal microbalance]

Furuya, Ryota, Yasushi Katayama, and Takashi Miura. “Deposition and dissolution of lithium through lithium phosphorus oxynitride thin film in some ionic liquids.” ECS Transactions 64.4 (2014): 453-459.

Wang, Zhongde, et al. “A novel potential-responsive ion exchange film system for heavy metal removal.” Journal of Materials Chemistry A 2.26 (2014): 10263-10272.

Yamada, Yasutaka, et al. “Effect of Basicity of Amino Group at Side Chain in Diallylamine-Type Copolymer Additive on Via-Filling by Copper Electrodeposition.” ECS Transactions 58.17 (2014): 97-107.

Tsai, Yao-Lung, et al. “Preparation and cyclic voltammetric dissolution of core-shell-shell Ag-Pt-Ag nanocubes and their comparison in oxygen reduction reaction in alkaline media.” International journal of hydrogen energy 39.11 (2014): 5528-5536.
[Keywords: EQCM, RRDE, ORR, (100) facet, Hollowing out]

Su, Y., and I. Zhitomirsky. “Hybrid MnO2/carbon nanotube-VN/carbon nanotube supercapacitors.” Journal of Power Sources 267 (2014): 235-242.
[Keywords: Supercapacitor, Hybrid, Carbon nanotube, Vanadium nitride, Manganese dioxide, Composite]

Du, Xiao, et al. “Facile preparation of ion-imprinted composite film for selective electrochemical removal of nickel (II) ions.” ACS applied materials & interfaces 6.12 (2014): 9543-9549.
[Keywords: heavy metal ions, selective removal, ion-imprinted, polypyrrole, ferricyanide]

Matsumoto, Hajime, Seiji Tsuzuki, and Keigo Kubota. “Lithium Redox in Imidazolium Ionic Liquids Composed of Five-Membered Cyclic Amide.” ECS Transactions 62.1 (2014): 223-230.

Park, Han-Saem, et al. “Kinetically enhanced pseudocapacitance of conducting polymer doped with reduced graphene oxide through a miscible electron transfer interface.” Nano Energy 3 (2014): 1-9.
[Keywords: Pseudocapacitance, Supercapacitors, Graphene, Conducting polymers, Electron transfer]

Matsuguchi, Masanobu, Noboru Harada, and Satoshi Omori. “Poly(N-isopropylacrylamide) nanoparticles for QCM-based gas sensing of HCl.” Sensors and Actuators B: Chemical 190 (2014): 446-450.
[Keywords: Poly(N-isopropylacrylamide), Nanoparticles, HCl gas sensor, Quartz crystal microbalance, Thermo-responsive polymer]

Kim, Jong-Min, et al. “Gravimetric detection of theophylline on pore-structured molecularly imprinted conducting polymer.” Sensors and Actuators B: Chemical 200 (2014): 25-30.
[Keywords: Molecularly imprinted conducting polymer (MICP), Colloidal lithography, Polystyrene colloidal beads, Electropolymerization, Theophylline, Polypyrrole]

Shi, Kaiyuan, Meng Ren, and Igor Zhitomirsky. “Activated carbon-coated carbon nanotubes for energy storage in supercapacitors and capacitive water purification.” ACS Sustainable Chemistry & Engineering 2.5 (2014): 1289-1298.
[Keywords: Supercapacitor, Activated carbon, Carbon nanotube, Capacitive deionization, Dye, Polypyrrole]

Jha, Sunil K., Chuanjun Liu, and Kenshi Hayashi. “Molecular imprinted polyacrylic acids based QCM sensor array for recognition of organic acids in body odor.” Sensors and Actuators B: Chemical 204 (2014): 74-87.
[Keywords: Body odor, Organic acid, MIP, QCM, Pattern recognition]

Norkus, Eugenijus, et al. “Wide pH Range Electroless Copper Deposition at Room Temperature EQCM and CV Study of Autocatalytic Copper(II) Reduction by Cobalt(II)-Pentaethylenehexamine Complexes.” ECS Transactions 58.43 (2014): 11-28.

Wang, JingPing, et al. “Study on capacitance evolving mechanism of polypyrrole during prolonged cycling.” The Journal of Physical Chemistry B 118.5 (2014): 1353-1362.

Norkus, E., et al. “EQCM and CV Study of Autocatalytic Copper(II) Reduction by Cobalt(II) Pentaethylenehexamine Complexes in Wide pH Range.” Journal of The Electrochemical Society 161.9 (2014): D373-D380.

Kimura, Tatsuo, Nagy L. Torad, and Yusuke Yamauchi. “Trace-level gravimetric detection promoted by surface interactions of mesoporous materials with chemical vapors.” Journal of Materials Chemistry A 2.22 (2014): 8196-8200.

Serizawa, Nobuyuki, et al. “Electrochemical quartz crystal microbalance measurements of lithium-aluminum alloy in a glyme-lithium salt molten complex.” ECS Transactions 58.48 (2014): 37-45.

Morimoto, Masahiro, et al. “Electrorheological response of the interfacial layer between a liquid crystal and a polymer alignment sublayer.” Thin solid films 558 (2014): 227-230.
[Keywords: Liquid crystals, Viscoelasticity, Interfacial layer, Quartz crystal microbalance]

Morita, Takafumi, et al. “Electrochemical quartz crystal microbalance analysis of nitrogen oxide-promoted platinum dissolution in HClO4.” The Journal of Physical Chemistry C 118.28 (2014): 15114-15121.

Masdek, Nik Rozlin Nik, and Akram M. Alfantazi. “An EQCM study on the influence of saccharin on the corrosion properties of nanostructured cobalt and cobalt-iron alloy coatings.” Journal of Solid State Electrochemistry 18.6 (2014): 1701-1716.
[Keywords: Electrochemical quartz crystal microbalance (EQCM), Cyclic voltammetry, Saccharin Nanostructured CoFe alloy]

Liu, Y., et al. “Surface modification and cathodic electrophoretic deposition of ceramic materials and composites using celestine blue dye.” RSC advances 4.56 (2014): 29652-29659.

Imbeault, Regis, et al. “Kinetically stable PtxIr100-x alloy thin films prepared by pulsed laser deposition: Oxidation of NH3 and poisoning resistance.” Electrochimica Acta 142 (2014): 289-298.
[Keywords: Nanostructured materials, Solid solution, Thin films, Pulsed laser ablation, Platinum, Iridium, Ammonia oxidation, CBPLD, XPS, XRD]

Torad, Nagy L., et al. “Highly Crystallized Nanometer-Sized Zeolite A with Large Cs Adsorption Capability for the Decontamination of Water.” Chemistry-An Asian Journal 9.3 (2014): 759-763.
[Keywords: cesium, crystal growth, hollow structures, mesoporous materials, zeolites]

Liang, Defu, et al. “Nanoscale Structuring in Au-Ni Films Grown by Electrochemical Underpotential Co-deposition.” ChemElectroChem 1.4 (2014): 787-792.
[Keywords: alloys, electrodeposition, nanoscale phase separation, thermodynamics, underpotential]

Tang, Jing, et al. “Towards Vaporized Molecular Discrimination: A Quartz Crystal Microbalance (QCM) Sensor System Using Cobalt-Containing Mesoporous Graphitic Carbon.” Chemistry-An Asian Journal 9.11 (2014): 3238-3244.
[Keywords: carbon, mesoporous materials, molecular discrimination, quartz crystal microbalance, sensors]

Sugimoto, Iwao, et al. “Low-vacuum deposition of glutamic acid and pyroglutamic acid: a facile methodology for depositing organic materials beyond amino acids.” Journal of amino acids 2014 (2014).

Torad, Nagy L., et al. “Direct synthesis of MOF‐derived nanoporous carbon with magnetic Co nanoparticles toward efficient water treatment.” Small 10.10 (2014): 2096-2107.

Esnault, Charles, et al. “Assessment of DNA Binding to Human Rad51 Protein by using Quartz Crystal Microbalance and Atomic Force Microscopy: Effects of ADP and BRC4-28 Peptide Inhibitor.” ChemPhysChem 15.17 (2014): 3753-3760.
[Keywords: atomic force microscopy, DNA damage, proteins, quartz crystal microbalance, surface modification]

竹内実. ビアフィリング電解銅めっきにおよぼすジアリルアミン系ポリマー添加剤の効果. Diss. Osaka Prefecture University (大阪府立大学), 2014.

Masdek, Nik Mohd, and Nik Rozlin. Electrodeposition and corrosion study of nanocrystalline cobalt and cobalt-iron alloy coatings. Diss. University of British Columbia, 2014.

Kim, Young-Soo. “Effective Lithium Transfer and Thermal Enhancement Based on Nitrile Functionality for Safer Lithium Ion Batteries.” (2014).

Karantonis, Antonis, et al. “Corrosion and Passivity of Copper in Basic Solutions of Acetate Ions.” Chemical Engineering Transactions 41 (2014): 295-300.


Hattori, Masayuki, and Yutaka Oda. “EQCM analysis of titanium corrosion in peroxide-or fluoride-containing solutions.” The Bulletin of Tokyo Dental College 54.3 (2013): 135-140.
[Keywords: Corrosion, Electrochemical quartz crystal microbalance, Titanium, Fluoride, Peroxide]

Wang, Lai-Hao, and Yu-Hsuan Chang. “The comparative electrochemistry of 2-mercaptothiazoline when using gold/quartz and modified silver/quartz electrodes, and its application in a flow-through voltammetric sensor.” Analytical Methods 5.6 (2013): 1407-1413.

鈴木悠介, 坪井涼, and 佐々木信也. “S111053 境界潤滑性能を支配する吸着膜のナノ物性評価 ([S111-05] 第 19 回卒業研究コンテスト (5)).” 年次大会 2013. 一般社団法人 日本機械学会, 2013.

Pan, Mingfei, et al. “Production of multi-walled carbon nanotube/poly (aminoamide) dendrimer hybrid and its application to piezoelectric immunosensing for metolcarb.” Sensors and Actuators B: Chemical 188 (2013): 949-956.
[Keywords: Piezoelectric immunosensing platform, MWCNT, Poly(amidoamine) dendrimer, Antibody immobilization, Metolcarb]

Lai-Hao, Wang, and Yung-Hua Lin. “Metal-Silver Based Electrodes as Sensitive Surfaces for Electrochemical Detection of Thio-Heterocycles.” IEEE Sensors Journal 13.9 (2013): 3442-3448.
[Keywords: Metal films on Ag/quartz crystal, electrochemical quartz crystal microbalance, thio-heterocycle]

Menanteau, Thibaud, Eric Levillain, and Tony Breton. “Electrografting via diazonium chemistry: from multilayer to monolayer using radical scavenger.” Chemistry of Materials 25.14 (2013): 2905-2909.
[Keywords: Surface functionalization, DPPH, diazonium reduction, radical capture]

Serizawa, Nobuyuki, et al. “EQCM measurement of deposition and dissolution of lithium in Glyme-Li salt molten complex.” Journal of the Electrochemical Society 160.9 (2013): A1529.

Lee, Sang Ha, et al. “Morphology and composition control of manganese oxide by the pulse reverse electrodeposition technique for high performance supercapacitors.” Journal of Materials Chemistry A 1.46 (2013): 14606-14611.

Wang, Ronghui, and Yanbin Li. “Hydrogel based QCM aptasensor for detection of avian influenzavirus.” Biosensors and Bioelectronics 42 (2013): 148-155.
[Keywords: Aptamer, Hydrogel, QCM aptasensor, Avian influenza, Virus detection]

Nie, Libo, et al. “Development of flowing automatic quartz crystal microbalance system for DNA detection.” Journal of nanoscience and nanotechnology 13.3 (2013): 2077-2080.

Katayama, Yasushi, Ryuta Fukui, and Takashi Miura. “Electrodeposition of lead from 1-butyl-1-methylpyrrolidinium bis (trifluoromethylsulfonyl) amide ionic liquid.” Journal of The Electrochemical Society 160.6 (2013): D251.

Lee, Chien-Liang, et al. “A comparison of alloyed and dealloyed silver/palladium/platinum nanoframes as electrocatalysts in oxygen reduction reaction.” Electrochemistry communications 34 (2013): 282-285.

Anik, Mustafa, Nilufer Kucukdeveci, and Ayca Yilmaz. “Charge/discharge characteristics of electroless CoB films.” Thin solid films 527 (2013): 69-75.
[Keywords: Cobalt boride, Electroless deposition, Charge/discharge, Hydrogen adsorption]

Brockman, Luke. “QCM aptasensor for rapid and specific detection of avian influenza virus.” (2013).
[Keywords: Aptasensor, Avian Influenza, QCM, Aptamer, Nanobeads]

Kuroe, Hironori, et al. “Platinum dissolution in nitrogen oxides-containing HClO4 solution studied by electrochemical quartz crystal microbalance.” ECS Transactions 50.2 (2013): 1607.

Yoshioka, Tomohiko, et al. “Investigation of multilayered protein adsorption on carbonate apatite with a QCM technique.” Key Engineering Materials. Vol. 529. Trans Tech Publications Ltd, 2013.
[Keywords: Carbonate Apatite, Protein Adsorption, Quartz Crystal Microbalance (QCM)]

Lee, Sang-Min, Viswanathan S. Saji, and Chi-Woo Lee. “Electrochemical multi-coloration of molybdenum oxide bronzes.” Bull. Korean Chem. Soc 34.8 (2013): 2349.
[Keywords : Mo oxide bronze, Bronzes, Electrochemistry, EQCM]

Lee, S., et al. “Electrodeposition of graphene layers doped with Bronsted acids.” Journal of materials science 48.20 (2013): 6891-6896.
[Keywords: Graphene Oxide, Electrochemical Performance, Gold Electrode, Graphene Layer, Quartz Crystal Microbalance]

Sun, Y., M. S. Ata, and I. Zhitomirsky. “Electrophoretic deposition of linear polyethylenimine and composite films.” Surface engineering 29.7 (2013): 495-499.

Sano, Naoki, et al. “Polyviologen hydrogel with high-rate capability for anodes toward an aqueous electrolyte-type and organic-based rechargeable device.” ACS applied materials & interfaces 5.4 (2013): 1355-1361.
[Keywords: rechargeable device, redox polymer polyviologen, electropolymerization, aqueous electrolyte]

Tsujimura, Seiya, et al. “Direct electron transfer to a metagenome-derived laccase fused to affinity tags near the electroactive copper site.” Physical Chemistry Chemical Physics 15.47 (2013): 20585-20589.

Su, Y., and I. Zhitomirsky. “Electrophoretic assembly of organic molecules and composites for electrochemical supercapacitors.” Journal of colloid and interface science 392 (2013): 247-255.
[Keywords: Pyrenebutyric acid, Electrophoretic deposition, Carbon nanotube, Manganese dioxide, Supercapacitor, Composite]

Takeuchi, M., et al. “Effect of Basicity of Amino Group at Side Chain in Diallylamine-Type Copolymer Additive on Via-Filling by Copper Electrodeposition.” Journal of The Electrochemical Society 160.12 (2013): D3110.

Su, Y., and I. Zhitomirsky. “Cataphoretic assembly of cationic dyes and deposition of carbon nanotube and graphene films.” Journal of colloid and interface science 399 (2013): 46-53.
[Keywords: Carbon nanotube, Graphene, Electrophoretic deposition, Dye, Crystal, violet, Film]

Staisiunas, Laurynas, et al. “Electrochemical and structural characterization of sputter-deposited Mg-Nb and Mg-Nb-Al-Zn alloy films.” Journal of Solid State Electrochemistry 17.6 (2013): 1649-1656.
[Keywords: Magnesium, Niobium, Alloys, Magnetron sputtering, Corrosion resistance]

Lee, Chien-Liang, Yao-Lung Tsai, and Chin-Wei Chen. “Specific and mass activity of silver nanocube and nanoparticle-based catalysts for electroless copper deposition.” Electrochimica Acta 104 (2013): 185-190.
[Keywords: Electrochemical surface area, Real surface area, Activator, Electroless copper deposition]

Killyeni, A., et al. “S-acetyl-calix [8] arene adsorption on polycrystalline Au surface: A kinetic study.” Electrochimica Acta 102 (2013): 225-232.
[Keywords: calix[8]arene, Adsorption kinetics, SAM reorganization, Electrochemical impedance spectroscopy, Quartz crystal microbalance]

Funaoka, Tatsuya, et al. “Characterization of carbon dioxide separation membrane with polycation nano-layers.” MRS Online Proceedings Library Archive 1492 (2013): 137-142.
[Keywords: absorption, self-assembly, thin film]

Irvin, Jennifer A., and Jamie R. Carberry. “Dominant ion transport processes of ionic liquid electrolyte in poly (3,4‐ethylenedioxythiophene).” Journal of Polymer Science Part B: Polymer Physics 51.5 (2013): 337-342.

Ishizaki, Manabu, et al. “Growth of Pt Subnano Clusters on Limited Surface Areas of Prussian Blue Nanoparticles.” Journal of Inorganic and Organometallic Polymers and Materials 23.1 (2013): 216-222.
[Keywords: Prussian blue, Pt subnano cluster, Coordination compound]

Liu, Li-Shang, et al. “Quartz crystal microbalance technique for analysis of cooling crystallization.” Analytical chemistry 85.9 (2013): 4790-4796.

Ignaszak, Anna, and Elod Gyenge. “Differential potential pulse deposition of amorphous osmium thin films and electrocatalytic activity for borohydride oxidation in alkaline media.” Electrochimica Acta 95 (2013): 268-274.
[Keywords: Osmium electrodeposition, Borohydride oxidation, Borohydride fuel cell, Electrocatalysis, Amorphous metal]

Montes-Rojas, Antonio, and Ana Laura Donjuan-Medrano. “A Study of the Initial Stages of Co Deposition on a Silver Electrode in Ammonia Medium Using an Electrochemical Quartz Crystal Microbalance.” ISRN Electrochemistry 2013 (2013).

Shinomiya, Takuya, et al. “A redox-active porous coordination network film based on a Ru complex as a building block on an ITO electrode.” Dalton Transactions 42.45 (2013): 16166-16175.

Chae, Il Seok, et al. “Self-doping inspired zwitterionic pendant design of radical polymers toward a rocking-chair-type organic cathode-active material.” Journal of Materials Chemistry A 1.4 (2013): 1326-1333.


Hudak, Nicholas Stephen. Rechargeable Aluminum Batteries with Conducting Polymers as Positive Electrodes. No. SAND2013-10810J. Sandia National Lab.(SNL-NM), Albuquerque, NM (United States), 2013.

Kim, Jong Min, et al. “Increase the Reliability and Applicability of Quartz Crystal Resonator Coupled with Other Instruments.” Journal of nanoscience and nanotechnology 13.3 (2013): 2028-2044.


Imai, Shinichi, and Hitoshi Watarai. “Magnetic-Force Quartz Crystal Microbalance for the Detection of Chemical Interactions.” Analytical Sciences 28.9 (2012): 833-836.

Kengne-Momo, R. P., et al. “Polythiophene synthesis coupled to quartz crystal microbalance and Raman spectroscopy for detecting bacteria.” Biointerphases 7.1 (2012): 67.

Ming, Hu, et al. “Size-and shape-controlled synthesis of Prussian Blue nanoparticles by a polyvinylpyrrolidone-assisted crystallization process.” CrystEngComm 14.10 (2012): 3387-3396.

Torad, Nagy L., et al. “Large Cs adsorption capability of nanostructured Prussian Blue particles with high accessible surface areas.” Journal of Materials Chemistry 22.35 (2012): 18261-18267.

Lam, Alfred, et al. “Ex situ study of chloride contamination on carbon supported Pt catalyst.” Journal of Power Sources 205 (2012): 235-238.
[Keywords: Polymer electrolyte membrane, Fuel cell, Chloride contamination, Electrochemical quartz crystal microbalance]

Takeuchi, M., et al. “Single diallylamine-type copolymer additive which perfectly bottom-up fills Cu electrodeposition.” Journal of The Electrochemical Society 159.4 (2012): D230.

Lee, Soojeong, et al. “A facile synthetic route for well defined multilayer films of graphene and PEDOT via an electrochemical method.” Journal of Materials Chemistry 22.5 (2012): 1899-1903.

Aleveque, Olivier, et al. “Revisiting the determination of full steady-state coverage of redox centers on self-assembled monolayers.” Electrochemistry communications 16.1 (2012): 6-9.
[Keywords: Full steady-state coverage, Self-assembled monolayers, Cyclic voltammetry, Langmuir isotherm]

Inoue, Mitsuhiro, Akira Nakazawa, and Minoru Umeda. “Effect of H2O2 on Pt electrode dissolution in H2SO4 solution based on electrochemical quartz crystal microbalance study.” International journal of hydrogen energy 37.2 (2012): 1226-1235.
[Keywords: Pt dissolution, Electrochemical quartz crystal microbalance (EQCM), H2O2, H2SO4, Polymer electrolyte fuel cells (PEFCs), Cathode catalyst]

Wu, Kangmin, et al. “Electrophoretic deposition of composite films from solutions of conjugated polymers and their supramolecular complexes with carbon nanotubes.” Materials Letters 67.1 (2012): 248-251.
[Keywords: Polymer, Carbon nanotube, Electrophoretic deposition, Composite, Film]

Yan, Ying, et al. “Polyaniline-modified quartz crystal microbalance sensor for detection of formic acid gas.” Water, Air, & Soil Pollution 223.3 (2012): 1275-1280.
[Keywords: QCM, Gas sensor, Polyaniline, Formic acid, On-line monitoring]

Deen, I., X. Pang, and I. Zhitomirsky. “Electrophoretic deposition of composite chitosan-halloysite nanotube-hydroxyapatite films.” Colloids and Surfaces A: Physicochemical and Engineering Aspects 410 (2012): 38-44.
[Keywords: Halloysite, Nanotube, Hydroxyapatite, Nanoparticle, Chitosan, Electrophoresis, Film]

Lee, Chien-Liang, et al. “Effect of electrochemical surface area on electroless copper deposition: Pd nanocubes as new activators.” Electrochimica acta 59 (2012): 587-591.
[Keywords: Composite, Polymer, Ceria, Film, Dispersant, Electrophoresis]

Yang, L., et al. “Electrophoretic deposition of polymer and composite films.” Surface engineering 28.8 (2012): 585-589.
[Keywords: Composite, Polymer, Ceria, Film, Dispersant, Electrophoresis]

Mizuta, Yutaka, et al. “Solvent effect on distribution of phenyl groups for C6H5SiO3/2-SiO2 coatings prepared on polycarbonate substrate.” Journal of sol-gel science and technology 62.1 (2012): 92-97.
[Keywords: Adhesion, Pai-Electron interaction, Polycarbonate, Phenylsilsesquioxane, Phase separation]

Xu, Lijian, et al. “Quartz Crystal Microbalance Detection of Schistosoma Egg Antigen.” Advanced Science Letters 10.1 (2012): 308-310.

Cheng, Xin Ran, et al. “Label-free methods for probing the interaction of clioquinol with amyloid-beta.” Analytical Methods 4.8 (2012): 2228-2232.

Xu, X., M. Ghidini, and G. Zangari. “The influence of hypophosphite additions on the electrodeposition of Co-rich Co-Pt alloys, and on their structural and magnetic properties.” Journal of the Electrochemical Society 159.4 (2012): D240.

Naruskevicius, L., et al. “A Co-based surface activator for electroless copper deposition.” Surface and Coatings Technology 206.11-12 (2012): 2967-2971.
[Keywords: CobaltBorohydride, Palladium-free activation, Electroless copper deposition]

Takeuchi, Minoru, et al. “Single Diallylamine Type Copolymer Additive which Perfectly Fills Cu Electrodeposition with only 1ppm.” ECS Transactions 41.43 (2012): 35.

Seo, Eunyong, et al. “Versatile double hydrophilic block copolymer: dual role as synthetic nanoreactor and ionic and electronic conduction layer for ruthenium oxide nanoparticle supercapacitors.” Journal of Materials Chemistry 22.23 (2012): 11598-11604.

Yagi, Shunsuke, et al. “Local pH control by electrolysis for ZnO epitaxial deposition on a Pt cathode.” Electrochimica acta 62 (2012): 348-353.
[Keywords: Zinc oxide, Epitaxial growth, Local pH distribution, Potential-pH diagram, Diffusion]

Ignaszak, A., et al. “Borohydride electro-oxidation on gold investigated by electrochemical quartz crystal microbalance.” Journal of the Electrochemical Society 160.1 (2012): H47.

Restrepo, David T., et al. “Low-temperature (210 degreeC) deposition of crystalline germanium via in situ disproportionation of GeI2.” Materials Research Bulletin 47.11 (2012): 3484-3488.
[Keywords: A. Semiconductors, A. Inorganic compound, A. Halides, B. Vapor deposition, C. X-ray diffraction]

Terao, Kyohei, et al. “Evaluation of Electrodeposited Gold Nanostructures for Applications in QCM Sensing.” Analytical Sciences 28.3 (2012): 291-291.

Yagi, Shunsuke, Naoya Oeda, and Chie Kojima. “Electroless growth of size-controlled gold nanoparticles using hydroquinone.” Journal of the Electrochemical Society 159.7 (2012): H668.

Guo, Hui-Shi, Xiao-Yu Han, and Woo-Sik Kim. “Self-Assembly of L-Cysteine for Chiral Recognition of Mandelic Acid in Gas Phase.” Journal of nanoscience and nanotechnology 12.12 (2012): 8874-8878.

Chen, Chih-Hao, et al. “Activity on electrochemical surface area: silver nanoplates as new catalysts for electroless copper deposition.” Journal of the Electrochemical Society 159.9 (2012): D507.

Chikushi, Natsuru, et al. “TEMPO-substituted polyacrylamide for an aqueous electrolyte-typed and organic-based rechargeable device.” Science China Chemistry 55.5 (2012): 822-829.
[Keywords: polyacrylamide, organic radical molecule, redox polymer, aqueous electrolyte, rechargeable battery]

Starosvetsky, Jeanna, et al. “Effects of physical parameters on bacterial cell adsorption onto pre-imprinted sol-gel films.” Journal of Biomaterials and Nanobiotechnology 3.04 (2012): 499.
[Keywords: Detection, Imprinting, Sol-Gel, Bacteria, QCM, E. coli O157:H7, S. typhimurium, Sphaerotilus natans, CLSM]

Kishi, Akira, et al. “Electrochemical degradation of electrodeposited Pt particles on mask scratched substrate using a landmark for ex situ scanning electron microscopy.” Applied surface science 258.19 (2012): 7497-7502.
[Keywords: Pt particle, Potential cycling, AFM mask scratchLandmark, Pt electrodeposition, Ex situ SEM observation]

Hiraishi, Tomohiro, et al. “Display of functionally active PHB depolymerase on Escherichia coli cell surface.” Macromolecular bioscience 12.2 (2012): 218-224.
[Keywords: bioengineering, cell surface display, degradation, PHB depolymerase, poly[(R)-3-hydroxybutyrate]

Irvin, David J., et al. “Enhanced electrochemical response of solution‐deposited n‐doping polymer via cocasting with ionic liquid.” Journal of Polymer Science Part B: Polymer Physics 50.16 (2012): 1145-1150.
[Keywords: co-casting, electroactive polymer, conducting polymers, electrochemistry, morphology, ion mobility, ionic liquid, n-doping]

Deen, Imran A. Electrodeposition of Organic-Inorganic Films for Biomedical Applications. Diss. 2012.
[Keywords: biomedical implants, coatings, biopolymers, bioceramics, halloysite, Electrophoretic Deposition (EPD), Polymer and Organic Materials]

Sun, Yanchao. Electrophoretic deposition of organic-inorganic nanocomposites. Diss. 2012.
[Keywords: Titanium dioxide, Polymers, Electrophoretic deposition, Dyes, Adsorption, Film, Ceramic Materials, Polymer and Organic Materials]

Ata, Sami Mustafa. Advanced Materials and Fabrication Methods for Electrochemical Supercapacitors. Diss. 2012.

Wang, Yaohui. Manganese dioxide based composite electrodes for electrochemical supercapacitors. Diss. 2012.

Sask, Kyla N. Antithrombogenic Biomaterials: Surface Modification with an Antithrombin-Heparin Covalent Complex. Diss. 2012.


Kang, Hyen-Wook, et al. “Influence of Diquat on Growth and Death of HepG2 Cells Using Quartz Crystal and Micro CCD Camera.” Journal of nanoscience and nanotechnology 11.5 (2011): 4236-4239.
[Keywords: Diquat, HepG2 Cell, Quartz crystal sensor, Resonant characteristics]



Li, Dujuan, et al. “A nanobeads amplified QCM immunosensor for the detection of avian influenza virus H5N1.” Biosensors and Bioelectronics 26.10 (2011): 4146-4154.
[Keywords: Avian influenza (AI) H5N1 virus, Magnetic nanobeads, Quartz crystal microbalance (QCM), ImmunosensorAnti-H5 antibodies]

Jiang, Xuesong, et al. “Evaluation of different micro/nanobeads used as amplifiers in QCM immunosensor for more sensitive detection of E. coli O157: H7.” Biosensors and Bioelectronics 29.1 (2011): 23-28.
[Keywords: E. coli O157:H7, Immunosensor, Quartz crystal microbalance, Micro/nanobeads, Coupled-oscillator theory]

Ma, R., and I. Zhitomirsky. “Electrophoretic deposition of silica-hyaluronic acid and titania-hyaluronic acid nanocomposites.” Journal of Alloys and Compounds 509 (2011): S510-S513.
[Keywords: Hyaluronic acid, SilicaTitania, Electrophoretic deposition, Nanocomposite, Film]

Inoue, Mitsuhiro, Akira Nakazawa, and Minoru Umeda. “Study of Pt electrode dissolution in H2O2-containing H2SO4 solution using an electrochemical quartz crystal microbalance.” Journal of Power Sources 196.10 (2011): 4579-4582.
[Keywords: Platinum, H2O2, Corrosion, Electrochemical quartz crystal microbalance, Polymer electrolyte fuel cells]

Allemand, Morgan, et al. “Synthesis of Cu-Pd alloy thin films by co-electrodeposition.” Electrochimica acta 56.21 (2011): 7397-7403.
[Keywords: Palladium-copper alloy, Potentiostatic electrodeposition, Potential pulse electrodeposition]

Lee, Chien-Liang, et al. “Graphite-nanofiber-supported porous Pt-Ag nanosponges: Synthesis and oxygen reduction electrocatalysis.” international journal of hydrogen energy 36.23 (2011): 15045-15051.
[Keywords: Nanoparticles, Nanosponges, Electrocatalyst]

Lee, Chien-Liang, and Chia-Chieh Syu. “Ag nanoparticle as a new activator for catalyzing electroless copper bath with 2,2′-bipyridyl.” Electrochimica acta 56.24 (2011): 8880-8883.
[Keywords: Activation, Printed circuit board]

Thang, Tran Vinh, and Charles Cougnon. “Redox properties and reactivity of a polythiophene-modified electrode in presence of ferrocene in solution or fixed onto the polymer network.” Journal of electroanalytical chemistry 657.1-2 (2011): 79-83.
[Keywords: Polythiophene, Ferrocene oxidation, Cyclic voltammetry, Quartz crystal microbalance, Modified electrode]

Torres-Rodriguez, Luz Maria, et al. “Electrochemical Preparation and Properties of Novel Conducting Polymers Derived from 5-Amino-2naphtalensulfonic Acid, Luminol and from Mixtures of Them.” Electropolymerization (2011): 97.

Yang, L., et al. “Electrodeposition of cerium oxide films and composites.” Surface and Coatings Technology 206.1 (2011): 1-7.
[Keywords: Electrodeposition, Electrophoretic deposition, Electrosynthesis Cerium oxide, Poly(2-vinylpyridine), Film]

Hwang, Ryeo Yun, et al. “Suppression of the loss of an electroactive dopant from polypyrrole by using a non-aqueous electrolyte of dopant-phobicity.” Journal of electroanalytical chemistry 657.1-2 (2011): 181-186.
[Keywords: Conducting polymers, De-doping, Electroactive dopants, Polypyrrole, Overoxidation]

Shen, Zhi-Qiang, et al. “QCM immunosensor detection of Escherichia coli O157:H7 based on beacon immunomagnetic nanoparticles and catalytic growth of colloidal gold.” Biosensors and Bioelectronics 26.7 (2011): 3376-3381.
[Keywords: Escherichia coli O157:H7, QCM immunosensor, Detection, Beacon immunomagnetic nanoparticles, Colloidal gold, Catalytic growth]

Wang, Y., X. Pang, and I. Zhitomirsky. “Electrophoretic deposition of chiral polymers and composites.” Colloids and Surfaces B: Biointerfaces 87.2 (2011): 505-509.
[Keywords: Electrophoretic deposition, Poly-L-lysine, Poly-L-ornithine, Chiral, Hydroxyapatite, Film]

Toyama, Y., et al. “pH dependence of rheological properties of gelatin gel mixed with agar or agarose.” Transactions of the Materials Research Society of Japan 36.3 (2011): 383-386.
[Keywprds: gelatin, agar, agarose, mixed gel, viscoelasticity]

Joshi, S., and E. Asselin. “Kinetics of gold leaching in alkaline sulfide solutions.” 50th Annual Conference of Metallurgists of CIM. World Gold, 2011.

Tseng, Shin-Hua, et al. “Ni2+-enhanced charge transport via pai-pai stacking corridor in metallic DNA.” Biophysical journal 100.4 (2011): 1042-1048.

Zhao, Dan-Dan, et al. “Carbon nanotube arrays supported manganese oxide and its application in electrochemical capacitors.” Journal of Solid State Electrochemistry 15.6 (2011): 1235-1242.
[Keywords: Electrochemical capacitors, MnOx/CNT nanocomposites, Chemical vapor deposition, Potentiostatic cathodic electrodeposition, Electrochemical properties]

Plana, Daniela, and Robert AW Dryfe. “The electro-oxidation of dimethylamine borane: Part 1, polycrystalline substrates.” Electrochimica acta 56.11 (2011): 3835-3844.
[Keywords: Electroless deposition, ElectrocatalysisVoltammetry]

Yu, Hong-wei, et al. “One step highly sensitive piezoelectric agglutination method for cholera toxin detection using GM1 incorporated liposome.” Procedia Environmental Sciences 8 (2011): 248-256.
[Keywords: Pieoelectric quartz crystal, Liposome, Cholera toxin, Monosialoganglioside]

Guo, Hui-Shi, et al. “Predicting the enantioseparation efficiency of chiral mandelic acid in diastereomeric crystallization using a quartz crystal microbalance.” Crystal growth & design 11.1 (2011): 53-58.

Tanaka, Hisashi, et al. “ICONE19-43912 ELECTROCHEMICAL CESIUM RECOVERY USING NANOPARTICLE INK OF METAL HEXACYANOFERRATE.” The Proceedings of the International Conference on Nuclear Engineering (ICONE) 2011.19. The Japan Society of Mechanical Engineers, 2011.
[Keywords: Cesium recovery, Electrochemical adsorption/desorption, Nanoparticle ink, Metal hexacyanoferrate, Prussian blue, Alkali metal]

Lam, V. W. S., et al. “Electrochemical quartz crystal microbalance study of borohydride electro-oxidation on Pt: the effect of borohydride concentration and thiourea adsorption.” The Journal of Physical Chemistry C 115.6 (2011): 2727-2737.

Fei, Yuehua, et al. “Sensitive and selective DNA detection based on the combination of hairpin-type probe with endonuclease/GNP signal amplification using quartz-crystal-microbalance transduction.” Analytica chimica acta 691.1-2 (2011): 95-102.
[Keywords: DNA detection, Quartz crystal microbalance, Gold nanoparticle, Hairpin probe, Endonuclease]

Wu, Chen-Chung, et al. “Electrochemical synthesis of Pd–NiO nanoparticles in water-in-oil microemulsions for activating electroless Ni deposition.” Journal of the Electrochemical Society 158.10 (2011): D616.

Ping, Jianfeng, et al. “The use of the platinum electrode coated with ultrathin poly (allylamine hydrochloride)/Nafion films for selective detection of hydrogen peroxide.” Ionics 17.5 (2011): 443-449.
[Keywords: PAH/Nafion, Hydrogen peroxide, Amperometric, Permeability, Electrodes, Sensors, Polymer electrolytes]

Liang, Defu, Jonathan J. Mallett, and Giovanni Zangari. “Underpotential codeposition of Fe–Pt alloys from an alkaline complexing electrolyte: Electrochemical studies.” Journal of the Electrochemical Society 158.3 (2011): D149.

竹田依加, et al. “平滑な電解銅箔の作製における添加剤の影響.” 化学工学論文集 37.6 (2011): 551-555.
[キーワード: 平滑性, 銅箔, 電気めっき, 優先配向, DDAC]

Cho, Eun‐Bum, Dmytro O. Volkov, and Igor Sokolov. “Ultrabright fluorescent silica mesoporous silica nanoparticles: control of particle size and dye loading.” Advanced Functional Materials 21.16 (2011): 3129-3135.
[Keywords: ultrabright fluorescence, nanophotonics, self-assembly, mesoporous silica nanoparticles, encapsulated fluorescent dyes]

Park, Jeong Seok. “Effects of phosphoric acid based rust converter on stainless steels for anti-corrosion applications.” (2011).


Kim, JongMin, et al. “Construction of simultaneous SPR and QCM sensing platform.” Bioprocess and biosystems engineering 33.1 (2010): 39.
[Keywords: SPR, QCM, Resonant frequency, Resonant resistance, SPR angle, ITO, Titanium, Index matching oil]

Pan, Yuliang, et al. “Selective collection and detection of leukemia cells on a magnet-quartz crystal microbalance system using aptamer-conjugated magnetic beads.” Biosensors and Bioelectronics 25.7 (2010): 1609-1614.
[Keywords: Aptamer, Magnetic beads, Leukemia cell, Quartz crystal microbalance]

Kang, Hyen-Wook, et al. “Monitoring of anticancer effect of cisplatin and 5-fluorouracil on HepG2 cells by quartz crystal microbalance and micro CCD camera.” Biosensors and Bioelectronics 26.4 (2010): 1576-1581.
[Keywords: Anticancer effect, Quartz crystal microbalance (QCM), Indium tin oxide (ITO) electrode, Micro CCD camera,Cisplatin,5-Fluorouracil (5-FU)]

Gautier, Christelle, et al. “Nitroxyl radical self assembled monolayers: Ion pairing investigation in organic and aqueous media.” Electrochemistry communications 12.1 (2010): 79-82.
[Keywords: Tempo, Self assembled monolayers, Cyclic voltammetry, Ion pairing]

Walter, Michael G., and Carl C. Wamser. “Synthesis and characterization of electropolymerized nanostructured aminophenylporphyrin films.” The Journal of Physical Chemistry C 114.17 (2010): 7563-7574.

Kengne-Momo, R. P., et al. “A simple method of surface functionalisation for immuno-specific immobilisation of proteins.” Analytical and bioanalytical chemistry 398.3 (2010): 1249-1255.
[Keywords: Surface functionalisation, Protein immobilisation, Raman spectroscopy, QCM]

Valiuliene, Genovaite, et al. “Electrochemical modification of Bi2S3 coatings in a nickel plating electrolyte.” Journal of Solid State Electrochemistry 14.2 (2010): 203.
[Keywords: Bi2S3, Ni3Bi2S2, EQCM, CV, XRD, EDX, SEM]

Lee, Chien-Liang, Chun-Ming Tseng, and Chen-Chung Wu. “Catalytic activity of Ag-Pd nanoparticles prepared by N2H4 reduction in electroless nickel deposition.” Journal of the Chinese Institute of Engineers 33.1 (2010): 105-109.
[Keywords: nanoparticle, palladium, kinetics, activator]

Chen, Huan, et al. “Construction of supported lipid membrane modified piezoelectric biosensor for sensitive assay of cholera toxin based on surface-agglutination of ganglioside-bearing liposomes.” Analytica chimica acta 657.2 (2010): 204-209.
[Keywords: Piezoelelctric biosensor, Surface-agglutination, Functionalized liposome, Supported lipid membrane, Renewable biosensor]

Sask, Kyla N., et al. “Surface modification with an antithrombin-heparin complex for anticoagulation: studies on a model surface with gold as substrate.” Acta biomaterialia 6.8 (2010): 2911-2919.
[Keywords: Blood compatibility, Heparin, Antithrombin, Gold, Polyethylene oxide]

Kang, Hyen-Wook, et al. “Evaluation of anticancer effect using quartz crystal microbalance and micro CCD camera.” 2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2010.

Ito, Tsuyoshi, et al. “Development of a Suppression Method for Deposition of Radioactive Cobalt after Chemical Decontamination:(II) Consideration of Fe3O4 Plating Mechanism on Stainless Steel in Aqueous Solution at 363K.” Journal of nuclear science and technology 47.8 (2010): 698-704.
[Keywords: boiling water reactor, chemical decontamination, recontamination, primary loop recirculation, stainless steel]

Wang, Yaohui, and Igor Zhitomirsky. “Effect of phenolic molecules on electrophoretic deposition of manganese dioxide-carbon nanotube nanocomposites.” Colloids and Surfaces A: Physicochemical and Engineering Aspects 369.1-3 (2010): 211-217.
[Keywords: Phenolic molecule, Manganese dioxide, Carbon nanotube, Nanocomposite, Electrochemical supercapacitor]

Park, Jun-Woo, et al. “Efficiency properties of OLED based on Zn(PQ)2 as electron transporting layer and hole blocking layer.” 2010 IEEE 5th International Conference on Nano/Micro Engineered and Molecular Systems. IEEE, 2010.
[Keywords: OLED, ETL, HBL, cyclic voltammetry]

Li, Yu, et al. “A Simple and Sensitive Piezoelectric Immunosensor for Cholera Toxin Based on GM1-Incorporated Liposome Agglutination.” Chinese Journal of Chemistry 28.9 (2010): 1678-1684.
[Keywords: GM1 incorporated liposomes, piezoelectric immonosensor, agglutination immunoassay, cholera toxin]

Suzuki, Hidetaka, et al. “The C-terminal domain is sufficient for host-binding activity of the Mu phage tail-spike protein.” Biochimica et Biophysica Acta (BBA)-Proteins and Proteomics 1804.9 (2010): 1738-1742.
[Keywords: Analytical ultracentrifugation, Bacteriophage, Domain, Limited proteolysis, Tail spike]

Cho, Eun-Bum, Dmytro O. Volkov, and Igor Sokolov. “Ultrabright fluorescent mesoporous silica nanoparticles.” small 6.20 (2010): 2314-2319.

Casagrande, Travis, et al. “Synthesis and electrophoretic deposition of single-walled carbon nanotube complexes with a conjugated polyelectrolyte.” Chemistry of Materials 22.9 (2010): 2741-2749.

Young, Alan P. Characterization of structural degradation in a polymer electrolyte membrane fuel cell cathode catalyst layer. Diss. University of British Columbia, 2010.


Jin, Xiaoyong, et al. “Piezoelectric immunosensor with gold nanoparticles enhanced competitive immunoreaction technique for quantification of aflatoxin B1.” Biosensors and Bioelectronics 24.8 (2009): 2580-2585.
[Keywords: Piezoelectric immunosensor, Competitive immunoreaction, Amplification technique, Aflatoxin B1, Nanoparticle-labeled secondary antibody]

Kang, Hyen-Wook, and Hiroshi Muramatsu. “Monitoring of cultured cell activity by the quartz crystal and the micro CCD camera under chemical stressors.” Biosensors and Bioelectronics 24.5 (2009): 1318-1323.
[Keywords: Human hepatoma cell line (HepG2), Quartz crystal microbalance (QCM), Indium tin oxide (ITO) electrode, Micro CCD cameraGlutaraldehyde (GA), t-Butylhydroperoxide (t-BHP)]

Jin, Xuefang, et al. “Biocatalyzed deposition amplification for detection of aflatoxin B1 based on quartz crystal microbalance.” Analytica chimica acta 645.1-2 (2009): 92-97.
[Keywords: Aflatoxin B1, Biocatalyzed deposition amplification, Enzyme, Indirect competitive immunoassay, Quartz crystal microbalance]

Lee, Dong-Yun, et al. “Direct monitoring of paraquat induced cell death using quartz crystal sensor.” Thin Solid Films 518.2 (2009): 707-710.
[Keywords :Paraquat, Quartz crystal sensor, HepG2, Resonance frequency, Resonance resistance, F-R diagram]

Guo, Hui-Shi, et al. “Versatile method for chiral recognition by the quartz crystal microbalance: chiral mandelic acid as the detection model.” Langmuir 25.2 (2009): 648-652.

Serizawa, Nobuyuki, Yasushi Katayama, and Takashi Miura. “EQCM Measurement of Ag(I)∕Ag Reaction in an Amide-Type Room-Temperature Ionic Liquid.” Journal of the Electrochemical Society 156.11 (2009): D503.

Lee, Chien-Liang, et al. “Catalytic characterization of hollow silver/palladium nanoparticles synthesized by a displacement reaction.” Electrochimica acta 54.23 (2009): 5544-5547.
[Keywords: Activation, Printed circuit board, Surface plasmon resonance, Platinum, Catalysis]

Boiadjieva, Tzvetanka, et al. “Electrochemical studies on Zn deposition and dissolution in sulphate electrolyte.” Journal of Solid State Electrochemistry 13.5 (2009): 671-677.
[Keywords: Hydrogen Evolution, Current Efficiency, Alloy Coating, Hydrogen Evolution Reaction, Electrochemical Quartz Crystal Microbalance]

Guo, Hui-Shi, et al. “Chiral recognition of mandelic acid by l-phenylalanine-modified sensor using quartz crystal microbalance.” Biosensors and Bioelectronics 24.9 (2009): 2931-2934.
[Keywords: Chiral recognition, Mandelic acid, L-phenylalanine, Quartz crystal microbalance, Vapor diffused molecular assembly]

Wang, Yaohui, and Igor Zhitomirsky. “Electrophoretic deposition of manganese dioxide-multiwalled carbon nanotube composites for electrochemical supercapacitors.” Langmuir 25.17 (2009): 9684-9689.

Pech, David, et al. “EQCM study of electrodeposited PbO2: Investigation of the gel formation and discharge mechanisms.” Electrochimica acta 54.28 (2009): 7382-7388.
[Keywords: EQCM, Lead dioxide, Electrodeposition, Hydration]

Guo, Hui-Shi, et al. “Chiral recognition of mandelic acid on quartz crystal microbalance by vapor diffused molecular assembly method.” Journal of nanoscience and nanotechnology 9.5 (2009): 2937-2943.
[Keywords: Chiral recognition, Mandelic acid, Quartz crystal microbalance, Vapor diffused molecular assembly]

Camacho, Conrado, et al. “Novel enzyme biosensor for hydrogen peroxide via supramolecular associations.” Biosensors and Bioelectronics 24.7 (2009): 2028-2033.
[Keywords: Biosensor, beta-Cyclodextrin, Enzyme immobilization, Horseradish peroxidase, Supramolecular complex]

Serizawa, Nobuyuki, et al. “EQCM Measurement of Sn(II)/Sn Reaction in 1-butyl-1-methylpyrrolidinium bis (trifluoromethylsulfonyl) amide Room-temperature Ionic Liquid.” Electrochemistry 77.8 (2009): 630-632.
[Keywords: Ionic Liquid, Deposition, EQCM]

Lee, Chien-Liang, et al. “Porous Ag-Pd triangle nanoplates with tunable alloy ratio for catalyzing electroless copper deposition.” Colloids and Surfaces A: Physicochemical and Engineering Aspects 352.1-3 (2009): 84-87.
[Keywords: Nanoparticle, Shape, Catalyst, Activation, Activator, Displacement]

Lee, Chien-Liang, Rong-Bing Wu, and Ciou-Mei Syu. “Self-assembled Pd nanospheres templated with polyvinylpyrrolidone: Electrochemical preparation and their application as novel catalysts in electroless copper deposition.” Electrochemistry communications 11.2 (2009): 270-273.
[Keywords: Activator, Porous, Self-assembly, Organization, Activation]

Lee, Chien-Liang, Chun-Ming Tseng, and Rong-Bing Wu. “Triangular Ag/Pd nanoplates with sawtooth edges: Displacement synthesis and optical and catalytic properties.” Electrochemistry communications 11.3 (2009): 627-630.
[Keywords: Nanoparticle, Printed circuit board, Shape, Catalyst, Surface plasmon resonance]

Mallett, J. J., et al. “Underpotential codeposition of Cu–Au alloys.” Electrochemical and Solid State Letters 12.8 (2009): D57.

Umeda, Minoru, et al. “Pt degradation mechanism in concentrated sulfuric acid studied using rotating ring-disk electrode and electrochemical quartz crystal microbalance.” The Journal of Physical Chemistry C 113.35 (2009): 15707-15713.

Serizawa, Nobuyuki, Yasushi Katayama, and Takashi Miura. “EQCM Measurement of Ag(I)/Ag Reaction in an Imide-type Room-temperature Ionic Liquid.” ECS Transactions 16.49 (2009): 421.

Lee, Chien-Liang, et al. “Synthesis of Highly Active Ag/Pd Nanorings for Activating Electroless Copper Deposition.” Journal of The Electrochemical Society 156.9 (2009): D348.

Lee, Dong-Yun, et al. “Electrochemical Detection of Self-Assembled Viologen Modified Electrode as Mediator of Glucose Sensor.” Journal of Electrical Engineering and Technology 4.1 (2009): 106-110.
[Keywords: Glucose Biosensor, Viologen, Mediator, Glucose Oxidase, Detection Limit]

Morimoto, Masahiro, et al. “Formation of Interfacial Layer between Liquid Crystal and Polymer Alignment Sublayer.” Japanese Journal of Applied Physics 48.7R (2009): 070220.

Jacob, Gideon Moses, and Igor Zhitomirsky. “Diffusion-Controlled Electrosynthesis of Nanoporous Electrodes for Electrochemical Supercapacitors.” Journal of Nano Research. Vol. 7. Trans Tech Publications Ltd, 2009.
[Keywords: Diffusion, Electrode, Electrosynthesis, Manganese Dioxide, Porosity, Super-Capacitor (SC)]

Xue, Fang-Qin, et al. “Performance and mechanism of Prussian blue (PB) modified carbon felt electrode.” Transactions of Nonferrous Metals Society of China 19 (2009): s594-s599.
[Keywords: porous electrod, ecarbon felt, redox flow battery (RFB), Prussian blue, electrochemical quartz crystal microbalance]

Girard, Hugues A., et al. “Electrostatic grafting of diamond nanoparticles: a versatile route to nanocrystalline diamond thin films.” ACS applied materials & interfaces 1.12 (2009): 2738-2746.
[Keywords: diamond nanoparticle, electrostatic grafting, nanocrystal seeding, CVD growth, diamond film]

Lee, Dong-Yun, et al. “Electrochemical detection of hydrogen peroxide via hemoglobin-DNA/pyterpy-modified gold electrode.” Current Applied Physics 9.4 (2009): e232-e234.
[Keywords: Hydrogen peroxide, Hemoglobin, DNA, Pyterpy, Detection limit]

Radulescu, Maria-Cristina, et al. “Quality control method based on quartz crystal microbalance and WGA for flour milled from germinated wheat.” European Food Research and Technology 229.5 (2009): 833-840.
[Keywords: Quartz crystal microbalance, Con A, WGA, Whole meal flour quality measurement, Germinated wheat]

Kim, Hwajeong, Patrick Degenaar, and Youngkyoo Kim. “Insertion of a cytochrome c protein into a complex lipid monolayer under an electric field.” The Journal of Physical Chemistry C 113.32 (2009): 14377-14380.

Mouanda, Brigitte, et al. “Comparison of two “grafting from” techniques for surface functionalization: Cathodic electrografting and surface-initiated atom transfer radical polymerization.” Journal of Electroanalytical Chemistry 629.1-2 (2009): 102-109.
[Keywords: Cathodic electrochemical polymerization, Atom transfer radical polymerization, Grafted surface, Poly n-butyl methacrylate]

Nakano, Yuri, Yoshimi Seida, and Yoshio Nakano. “Influence of Network Structure and Hydration on Viscoelastic Behavior of N-Isopropylacrylamide Gel.” Journal of chemical engineering of Japan 42.7 (2009): 531-537.
[Keywords: Thermosensitive Polymer Gel, Quartz Crystal Microbalance, Viscoelastic Behavior, Phase Separation, Hydration]

Kageyama, Yasuhiro, et al. “Observation of the membrane binding activity and domain structure of gpV, which comprises the tail spike of bacteriophage P2.” Biochemistry 48.42 (2009): 10129-10135.

Jacob, Moses Gideon. Nanocomposite electrodes for electrochemical supercapacitors. Diss. 2009.
[Keywords: Materials Science and Engineering, Materials Science and Engineering]


Guo, Manli, et al. “Enhanced adhesion/spreading and proliferation of mammalian cells on electropolymerized porphyrin film for biosensing applications.” Biosensors and Bioelectronics 23.6 (2008): 865-871.
[Keywords: Polyporphyrin, Adhesion, Proliferation, MCF-7 cell, Piezoelectric, Biosensing]

Kang, Hyen-Wook, et al. “Monitoring of morphology and physical properties of cultured cells using a micro camera and a quartz crystal with transparent indium tin oxide electrodes after injections of glutaraldehyde and trypsin.” Analytica chimica acta 624.1 (2008): 154-161.
[Keywords: Quartz crystal, Indium tin oxide electrode, Microphotograph, Chemical stimulation, Glutaraldehyde, Trypsin, Human hepatoma cell line]

Perre, Emilie, et al. “Direct electrodeposition of aluminium nano-rods.” Electrochemistry communications 10.10 (2008): 1467-1470.
[Keywords: Aluminium, Electrodeposition, Ionic liquid, Three-dimensional microbattery]

Cheong, M., and I. Zhitomirsky. “Electrodeposition of alginic acid and composite films.” Colloids and Surfaces A: Physicochemical and Engineering Aspects 328.1-3 (2008): 73-78.
[Keywords: Alginate, Hydroxyapatite, Titanium oxide, Film, Electrodeposition]

Jacob, G. Moses, and I. Zhitomirsky. “Microstructure and properties of manganese dioxide films prepared by electrodeposition.” Applied Surface Science 254.20 (2008): 6671-6676.
[Keywords: Manganese dioxide, Porous films, Electron microscopy, Electrosynthesis, Capacitance]

Hubert, C., et al. “A better understanding of the growth mechanism of Zn (S,O,OH) chemical bath deposited buffer layers for high efficiency Cu (In,Ga)(S,Se)2 solar cells.” physica status solidi (a) 205.10 (2008): 2335-2339.

Reyter, David, Daniel Belanger, and Lionel Roue. “Study of the electroreduction of nitrate on copper in alkaline solution.” Electrochimica Acta 53.20 (2008): 5977-5984.
[Keywords: Nitrate electroreduction, Copper, Reaction mechanism, Rotating disc electrode, Electrolysis]

Omura, Ayako, et al. “Electrochromic thin film of water-dispersible Prussian-blue nanoparticles.” IEICE transactions on electronics 91.12 (2008): 1887-1888.
[Keywords: Prussian-blue, nanoparticle, electrochromism, thin film, electrochemical quartz crystal microbalance (EQCM)]

Ding, Yanjun, et al. “Poly-L-lysine/hydroxyapatite/carbon nanotube hybrid nanocomposite applied for piezoelectric immunoassay of carbohydrate antigen 19-9.” Analyst 133.2 (2008): 184-190.

Chen, Huan, et al. “An ultrasensitive chemiluminescence biosensor for cholera toxin based on ganglioside-functionalized supported lipid membrane and liposome.” Biosensors and Bioelectronics 24.4 (2008): 684-689.
[Keywords: Supported lipid membrane, Chemiluminescence biosensor, Liposome, Cholera toxin, Enhanced chemiluminescence reaction]

Bayoumi, F. M., A. M. Abdullah, and B. Attia. “Kinetics of corrosion inhibition of benzotriazole to copper in 3.5% NaCl.” Materials and corrosion 59.8 (2008): 691-696.
[Keywords: benzotriazole, corrosion inhibition, electrochemical impedance spectroscopy, quartz crystal microbalance]

Breton, Tony, and Daniel Belanger. “Modification of carbon electrode with aryl groups having an aliphatic amine by electrochemical reduction of in situ generated diazonium cations.” Langmuir 24.16 (2008): 8711-8718.

Georges, C., E. Rocca, and P. Steinmetz. “Synergistic effect of tolutriazol and sodium carboxylates on zinc corrosion in atmospheric conditions.” Electrochimica acta 53.14 (2008): 4839-4845.
[Keywords: Tolutriazol, Carboxylate, Corrosion inhibition, Zinc corrosion]

Lee, Chien-Liang, et al. “Activation of Ag/Pd triangular nanoshells with different sizes on depositing electrolessly copper.” Electrochimica acta 53.20 (2008): 5905-5908.
[Keywords: Nanoparticle, Shape, Catalyst, Printed circuit board, ULSI]

Wei, J., and I. Zhitomirsky. “Electrosynthesis of manganese oxide films.” Surface engineering 24.1 (2008): 40-46.
[Keywords: Electrosynthesis, Supercapacitor, Manganese oxide, Film, Reduction, Capacitance]

Zhang, Yun, et al. “A reusable piezoelectric immunosensor using antibody-adsorbed magnetic nanocomposite.” Journal of immunological methods 332.1-2 (2008): 103-111.
[Keywords: Piezoelectric immunosensor, Biomolecule immobilization, Hydroxyapatite, Multifunctional composite, Magnetic separation]

Lee, Chien-Liang, et al. “Hollow Ag/Pd triangular nanoplate: a novel activator for electroless nickel deposition.” Nanotechnology 19.21 (2008): 215709.

JIN, Xiao-Yong, et al. “A piezoelectric immunosensor based on agglutination reaction with amplification of silica nanoparticles.” Chinese Journal of Chemistry 26.12 (2008): 2191-2196.
[Keywords: piezoelectric immunosensor, silica nanoparticle, immunoagglutination assay, amplification of nanoparticle]

Cougnon, Charles, et al. “Redox and ion-exchange properties in surface-tethered DNA-conducting polymers.” Biosensors and Bioelectronics 23.7 (2008): 1171-1174.
[Keywords: DNA sensor, Polythiophene, Electrochemical impedance spectroscopy]

Umeda, Minoru, et al. “Cathode platinum degradation in membrane electrode assembly studied using a solid-state electrochemical cell.” The Journal of Physical Chemistry C 112.46 (2008): 18098-18103.

Ding, Yanjun, et al. “Cell-based immobilization strategy for sensitive piezoelectric immunoassay of total prostate specific antigen.” Biosensors and Bioelectronics 24.2 (2008): 228-232.
[Keywords: Yeast cell, Quartz crystal microbalance, Prostate specific antigen]

Estrela, Pedro, et al. “Label-free detection of protein interactions with peptide aptamers by open circuit potential measurement.” Electrochimica Acta 53.22 (2008): 6489-6496.
[Keywords: Label-free detection, Open circuit potential, Differential voltage instrumentation, Protein interactions, Peptide aptamers]

Lee, Dong-Yun, et al. “Immobilization, hybridization and amperometric detection of DNA sensor using quartz crystal microbalance.” Journal of nanoscience and nanotechnology 8.9 (2008): 4553-4556.
[Keywords: Hybridization, QCM, Resonant Frequency, Single-Stranded DNA (ssDNA)]

Xu, X., and G. Zangari. “Electrodeposition of Co–P films from alkaline electrolytes.” Journal of the Electrochemical Society 155.12 (2008): D742.

Eskhult, Jonas, et al. “Current oscillations during chronoamperometric and cyclic voltammetric measurements in alkaline Cu (II)-citrate solutions.” Electrochimica acta 53.5 (2008): 2188-2197.
[Keywords: Current oscillations, Cu, Cu2O, Nanolayers, Local pH variations, Citrate]

桑原優, et al. “白金電極の濃硫酸溶液中における電気化学的溶解.” 分析化学 57.1 (2008): 15-21.

Ding, Yanjun, et al. “A novel piezoelectric immunosensor for CA125 using a hydroxyapatite/chitosan nanocomposite-based biomolecular immobilization method.” Australian journal of chemistry 61.7 (2008): 500-505.

松田光由, 吉原佐知雄, and 土橋誠. “電気銅めっき皮膜の物性経時変化の抑制.” 表面技術 59.10 (2008): 696-696.

Cheong, Marco. Nanostructured Manganese Oxide and Composite Electrodes for Electrochemical Supercapacitors. Diss. 2008.
[Keywords: nanostructured, manganese oxide, composite electrodes, electrochemical, supercapacitors, carbon nanotubes]

Walter, Michael George. Nanostructered Aminophenylporphyrin Films for Use in Bulk Heterojunction and Inverse Dye-sensitized TiO2 Solar Cells. Diss. Portland State University. Chemistry Ph. D. Program, 2008.

Lunghi, Carlotta. “Immunotherapy of Tumours: Synthesis of a Mimetic of GM3 Ganglioside Antigen.”

Keighley, Simon David. Label-Free Detection of Nucleic Acids by Their Intrinsic Molecular Charge. Diss. University of Cambridge, 2008.


Ogle, K., A. Tomandl, and N. Meddahi. “In situ monitoring of dissolutionprecipitation mechanisms using coupled quartz crystal microbalance/atomic emission spectroelectrochemistry.” EFC 54 (2007): 158.

Keita, Bineta, et al. “Electrochemical generation of high-valent manganese catalysts in aqueous solutions from the sandwich-type polyoxoanion [(MnIII(H2O))3(SbW9O33)2]9-.” Electrochemistry communications 9.1 (2007): 164-172.
[Keywords: Polyoxometalates, High-valent manganese, Electrochemistry, Electrocatalysis, NO detection, Nitrite detection]

Pichon, Celine, et al. “Characterization and electrochemical properties of molecular icosanuclear and bidimensional hexanuclear Cu(II) azido polyoxometalates.” Inorganic chemistry 46.13 (2007): 5292-5301.

Nie, L. B., et al. “Enhanced DNA detection based on the amplification of gold nanoparticles using quartz crystal microbalance.” Nanotechnology 18.30 (2007): 305501.

Ding, Yanjun, et al. “A piezoelectric immunosensor for the detection of alpha-fetoprotein using an interface of gold/hydroxyapatite hybrid nanomaterial.” Biomaterials 28.12 (2007): 2147-2154.
[Keywords: Nanoparticle, Palladium, Electroless copper deposition, Kinetics, Electroless nickel deposition, Surface modification, Activator]

Ghodbane, Ouassim, Lionel Roue, and Daniel Belanger. “Copper electrodeposition on pyrolytic graphite electrodes: Effect of the copper salt on the electrodeposition process.” Electrochimica acta 52.19 (2007): 5843-5855.
[Keywords: Copper, Electrodeposition, Pyrolytic graphite, Sulfate adsorption, Nucleation and growth]

Lee, Chien-Liang, Yu-Ching Huang, and Li-Chen Kuo. “Catalytic effect of Pd nanoparticles on electroless copper deposition.” Journal of Solid State Electrochemistry 11.5 (2007): 639-646.
[Keywords: Nanoparticle, Palladium, Electroless copper deposition, Kinetics, Electroless nickel deposition, Surface modification, Activator]

Liu, Fei, et al. “QCM immunosensor with nanoparticle amplification for detection of Escherichia coli O157:H7.” Sensing and Instrumentation for Food Quality and Safety 1.4 (2007): 161-168.
[Keywords: Immunosensor, E. coli O157:H7, Quartz crystal microbalance, Nanoparticle, Bacteria detection, Food safety]

Yang, Minghui, et al. “Direct electrochemistry of hemoglobin in gold nanowire array.” Biosensors and Bioelectronics 23.3 (2007): 414-420.
[Keywords: Direct electrochemistry, Gold nanowire array, Hemoglobin, Glucose]

Nakano, Yuri, et al. “Viscoelastic behavior of thermoresponsive polymer hydrogel with organic adsorbate observed using quartz crystal microbalance.” Chemistry letters 36.10 (2007): 1204-1205.

Marquez, Abraham Guadalupe Cano, Luz Maria Torres Rodriguez, and Antonio Montes Rojas. “Synthesis of fully and partially sulfonated polyanilines derived from ortanilic acid: An electrochemical and electromicrogravimetric study.” Electrochimica acta 52.16 (2007): 5294-5303.
[Keywords: Polyaniline, Sulfonated, EQCM study, Charge compensation process, 2-Aminobenzene sulfonic acid]

Jbari, Atman, et al. “Multiplexed frequency spectrum analyzer instrumentation for the characterization of multiple QCM-based biosensors.” 2007 International Conference on Sensor Technologies and Applications (SENSORCOMM 2007). IEEE, 2007.
[keywords: multiplexed frequency spectrum analyzer, multiple QCM-based biosensors, operational parameters exxtraction, frequency response, quartz crystal microbalance sensors]

Al Kharafi, F. M., A. M. Abdullah, and B. G. Ateya. “A quartz crystal microbalance study of the kinetics of interaction of benzotriazole with copper.” Journal of applied electrochemistry 37.10 (2007): 1177-1182.
[Keywords: Benzotriazole, Copper, Corrosion inhibitor, Duplex film, Quartz crystal microbalance]

Lee, Chien-Liang, et al. “Activator for Electrolessly Depositing Copper from Triangular Ag∕ Pd Nanoshells.” Electrochemical and Solid State Letters 11.2 (2007): D27.

Takita, Ryoichi, Kentaro Yoshida, and Jun-ichi Anzai. “Redox properties of ferricyanide ion on layer-by-layer deposited poly(glutamic acid) film-coated electrodes and its use for electrocatalytic sensing of ascorbic acid.” Sensors and Actuators B: Chemical 121.1 (2007): 54-60.
[Keywords: LbL films, Poly(glutamic acid), Ferricyanide ion, Ascorbic acid]

Xu, Xinhua, et al. “Quartz crystal microbalance study of protein adsorption on chitosan, chitosan/poly (vinyl pyrrolidone) blends and chitosan-graft-poly (vinyl pyrrolidone) surfaces.” Journal of bioactive and compatible polymers 22.2 (2007): 195-206.
[Keywords: chitosan, protein adsorption, quartz crystal microbalance (QCM), protein adsorption/desorption kinetics, poly(vinyl pyrrolidone), Langmuir isotherm]

Yamada, Miwa, et al. “Autoregulator protein PhaR for biosynthesis of polyhydroxybutyrate [P(3HB)] possibly has two separate domains that bind to the target DNA and P(3HB): functional mapping of amino acid residues responsible for DNA binding.” Journal of bacteriology 189.3 (2007): 1118-1127.

Zhou, Yue-Min, et al. “Deposition transfection technology using a DNA complex with a thermoresponsive cationic star polymer.” Journal of Controlled Release 123.3 (2007): 239-246.
[Keywords: DNA delivery, Reverse transfection, Deposition transfection, Thermoresponsive polymer, Cationic polymer]

Montes-Rojas, Antonio, Luz Maria Torres-Rodriguez, and Cesar Nieto-Delgado. “Electromicrogravimetric study of underpotential deposition of Co on textured gold electrode in ammonia medium.” New Journal of Chemistry 31.10 (2007): 1769-1776.

Cheng, Qiang Liu Juan, Kangde Yao, and Qiang Chen. “Quartz Crystal Microbalance Study of Protein Adsorption on Chitosan, Chitosan/Poly(vinyl pyrrolidone) Blends and Chitosan-graft-Poly(vinylpyrrolidone) Surfaces.” Journal of BIOACTIVE AND COMPATIBLE POLYMERS 22 (2007): 195.

Chen, Wei, Xiaojun Li, and Liming Dai. “Surface Adsorption and Replacement of Acid-Oxidized Single-Walled Carbon Nanotubes and Poly (vinyl pyrrolidone) Chains.” Research Letters in Physical Chemistry 2007 (2007).

Pang, Pengfei, et al. “Detection of Pseudomonas aeruginosa using a wireless magnetoelastic sensing device.” Biosensors and Bioelectronics 23.2 (2007): 295-299.
[Keywords: Magnetoelastic sensor, Pseudomonas aeruginosa (P. aeru), Wireless, Microbial]

Gautier, Christelle, et al. “A poly(cyclopentadithiophene) matrix suitable for electrochemically controlled DNA delivery.” Analytical chemistry 79.20 (2007): 7920-7923.

Bryngelsson, Hanna, et al. “Electrodeposition and electrochemical characterisation of thick and thin coatings of Sb and Sb/Sb2O3 particles for Li-ion battery anodes.” Electrochimica acta 53.3 (2007): 1062-1073.
[Keywords: Electrodeposition, Sb, Sb2O3, Nanoparticles, Anode materials, Li-ion batteries, SEI]

Gautier, Christelle, et al. “Detection and modelling of DNA hybridization by EIS measurements: Mention of a polythiophene matrix suitable for electrochemically controlled gene delivery.” Biosensors and Bioelectronics 22.9-10 (2007): 2025-2031.
[Keywords: DNA sensor, Label-free detection, DNA-modified polythiophene, Electrochemical impedance spectroscopy, Controlled delivery]

Bryngelsson, Hanna, et al. “Electrodeposited Sb and Sb/Sb2O3 nanoparticle coatings as anode materials for Li-ion batteries.” Chemistry of materials 19.5 (2007): 1170-1180.

Eskhult, Jonas, and Leif Nyholm. “Pulsed galvanostatic and potentiostatic electrodeposition of Cu and Cu2O nanolayers from alkaline Cu (II)-citrate solutions.” Journal of The Electrochemical Society 155.2 (2007): D115.

Toma, Lucio, et al. “Synthesis, Conformational Studies, Binding Assessment and Liposome Insertion of a Thioether‐Bridged Mimetic of the Antigen GM3 Ganglioside Lactone.” ChemBioChem 8.14 (2007): 1646-1649.

Hussain, Firasat, et al. “Dititanium‐Containing 19‐Tungstodiarsenate(III)[Ti2(OH)2As2W19O67(H2O)]8-: Synthesis, Structure, Electrochemistry, and Oxidation Catalysis.” Chemistry-A European Journal 13.17 (2007): 4733-4742.
[Keywords: electrochemistry, homogeneous catalysis, polyoxometalates, self-assembly, titanium, tungsten]

Numata, Keiji, et al. “Adsorption and hydrolysis reactions of poly (hydroxybutyric acid) depolymerases secreted from Ralstonia pickettii T1 and Penicillium funiculosum onto poly [(R)-3-hydroxybutyric acid].” Biomacromolecules 8.7 (2007): 2276-2281.

Wei, Jianmei. “The development of manganese oxide electrodes for electrochemical supercapacitors.” (2007).
[Keywords: cathodic electrodeposition, manganese oxide, electrodes, electrochemical supercapacitors]


Kim, Hooi-Sung, and Carl C. Wamser. “Photoelectropolymerization of aniline in a dye-sensitized solar cell.” Photochemical & Photobiological Sciences 5.10 (2006): 955-960.

Lee, Chien-Liang, Yu-Ching Huang, and Li-Chen Kuo. “High catalytic potential of Ag/Pd nanoparticles from self-regulated reduction method on electroless Ni deposition.” Electrochemistry communications 8.6 (2006): 1021-1026.
[Keywords: Nanoparticle, Palladium, Electroless copper deposition, Kinetics, Electroless nickel deposition, Bimetallic, Activator, Silver]

Kuo, Li-Chen, et al. “The activation effect of Pd nanoparticles on electroless nickel-phosphorous deposition.” Electrochimica acta 52.1 (2006): 353-360.
[Keywords: Nanocatalyst, Quartz crystal microbalance, Activator, Electroless copper deposition, Mixed potential theory]

Lee, Chien-Liang, et al. “Mesoporous, self-assembled palladium nanospheres: High efficiency activator for electroless nickel deposition.” Electrochemistry communications 8.5 (2006): 697-702.
[Keywords: Nanoparticle, Palladium, Electroless nickel deposition, Kinetics Mixed-potential theory, Surface modification, Activator]

Gautier, Christelle, et al. “Label-free detection of DNA hybridization based on EIS investigation of conducting properties of functionalized polythiophene matrix.” Journal of Electroanalytical Chemistry 587.2 (2006): 276-283.
[Keywords: DNA sensorFree-label detection, DNA-modified polythiophene, Electrochemical impedance spectroscopy]

Tago, Takahiro, Hirokazu Shibata, and Hiroyuki Nishide. “Membrane Preparation of Polysulfonic Acid Complexes by Layer‐by‐Layer Adsorption.” Macromolecular symposia. Vol. 235. No. 1. Weinheim: WILEY‐VCH Verlag, 2006.
[Keywords: layer-by-layer adsorption, poly(4-styrenesulfonic acid), poly(allylamine), polyelectrolytes, polymer complex]

Zhou, Anhong, and YangQuan Chen. “Fractional order processing of quartz crystal microbalance based DNA biosensor signals.” IFAC Proceedings Volumes 39.11 (2006): 188-193.
[Keywords: Fractional order signal processing, fractional Fourier transformation (FrFT), rescaled range statistical analysis, DNA hybridization measurement,quartz crystal microbalance]

Kubono, Atsushi, and Ryuichi Akiyama. “Viscoelastic analysis in the formation of organic thin films.” Molecular Crystals and Liquid Crystals 445.1 (2006): 213-503.
[Keywords: alignment, humidity, liquid crystal, polar group, surface]

Pernel, C., J. Farkas, and D. Louis. “Copper in organic acid based cleaning solutions.” Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena 24.5 (2006): 2467-2471.

Lee, Chien-Liang, and Yu-Ching Huang. “Electroless activator for depositing copper from self-assembled palladium nanospheres with mesopores.” Electrochemical and Solid State Letters 9.12 (2006): C196.

Lee, Dong-Yun, et al. “Influence of anions on electrochemical redox reactions and electrical properties using a viologen derivative.” Japanese journal of applied physics 45.4S (2006): 3772.

Lee, Dong-Yun, et al. “Charge transfer property of self-assembled viologen derivative by electrochemical quartz crystal microbalance response.” Journal of nanoscience and nanotechnology 6.11 (2006): 3657-3660.
[Keywords: EQCM, Mass Change, QCM, Resonant Frequency, Viologen]

Lee, D. Y., et al. “Study on the electron transfer properties of self-assembled viologen monolayers using QCA.” Molecular Crystals and Liquid Crystals 445.1 (2006): 149-439.
[Keywords: cyclic voltammetry (CV), quartz crystal microbalance (QCM), self-assembly, viologen]

Yin, Fan, et al. “Study of hemoglobin-octadecylamine LB film formation and deposition by compressibility analyse, QCM and AFM.” Current Applied Physics 6.4 (2006): 728-734.
[Keywords: Hemoglobin, Octadecylamine, LB film, Compressibility, QCM, AFM image]

Lee, Dong-Yun, et al. “A Study on the Surface Characteristic of the Viologen Self-Assembled Monolayers Using QCA and STM.” International Journal of Nanoscience 5.06 (2006): 901-905.
[Keywords: Viologen, self-assembly, Quartz Crystal Microbalance (QCM), resonant frequency]

Deng, Ting, et al. “Quartz crystal microbalance bioaffinity sensor for biotin based on mixed self-assembled monolayers and metastable molecular complex receptor.” Biosensors and Bioelectronics 21.8 (2006): 1545-1552.
[Keywords: Quartz crystal microbalance, Bioaffinity sensor, BiotinMixed self-assembled monolayer, HABA, Metastable molecular complex]

Yin, Fan, Hoon-Kyu Shin, and Young-Soo Kwon. “Formation of hemoglobin(Hb)-octadecylamine(ODA) Langmuir-Blodgett(LB) film by spreading Hb solution directly onto subphase covered with a layer of ODA and its electrochemical property.” Thin solid films 499.1-2 (2006): 1-7.
[Keywords: Direct electron transfer, Langmuir-Blodgett, Hemoglobin, Octadecylamine]

Wang, Hua, et al. “Immunophenotyping of acute leukemias using a quartz crystal microbalance and monoclonal antibody-coated magnetic microspheres.” Analytical chemistry 78.8 (2006): 2571-2578.
[Keywords: Immunology, Assays, Peptides and proteins, Biopolymers, Microspheres]

Eskhult, Jonas, Merja Herranen, and Leif Nyholm. “On the origin of the spontaneous potential oscillations observed during galvanostatic deposition of layers of Cu and Cu2O in alkaline citrate solutions.” Journal of Electroanalytical Chemistry 594.1 (2006): 35-49.
[Keywords: Potential oscillations, Cu, Cu2O, Citrate, Comproportionation, Precipitation, Reaction scheme]

Liu, Fei, Xiao-Li Su, and Yanbin Li. “Detection of Escherichia coli O157:H7 using a QCM Immunosensor with Nanoparticle Amplification.” 2006 ASAE Annual Meeting. American Society of Agricultural and Biological Engineers, 2006.
[Keywords: Immunosensor, E.coli O157:H7, quartz crystal microbalance, nanoparticle, bacterial detection]

Yamada, Miwa, et al. “Autoregulator Protein PhaR for Biosynthesis of Polyhydroxybutyrate [P(3HB)] Has Possible Two Separate Domains That Binds to the Target DNA and P(3HB): Functional Mapping of Amino Acid Residues Responsible for DNA Binding.” Journal of Bacteriology (2006).

山田勝実, and 占部茂治. “トリチオシアヌル酸高分子膜の光解重合とパターン形成.” 日本写真学会誌 69.3 (2006): 205-207.
[キーワード: ジスルフィド高分子, 光解重合, 光誘起電子移動, パターン形成, イオン交換膜]

Yamashita, Koichi, et al. “Nonspecific hydrophobic interactions of a repressor protein, PhaR, with poly [(R)-3-hydroxybutyrate] film studied with a quartz crystal microbalance.” Biomacromolecules 7.8 (2006): 2449-2454.
[Keywords: Plastics, Adsorption, Genetics, Molecules, Biopolymers]

Li, Yanbin, and Xiao-Li Su. “Piezoelectric Sensors.” Encyclopedia of Medical Devices and Instrumentation (2006).

Li, Y. “2.3 Biosensors.” American Society of Agricultural and Biological Engineers (2006): 52.
[Keywords: Biosensors, Biosensing materials, Transducers, Biological agents, Chemical agents]


Mannelli, Ilaria, et al. “Direct immobilisation of DNA probes for the development of affinity biosensors.” Bioelectrochemistry 66.1-2 (2005): 129-138.
[Keywords: Biosensors, DNA probes Immobilisation procedure]

Xiong, Wei, and Mark D. Baker. “Electrochemistry of zeolites on thickness shear mode oscillators.” The Journal of Physical Chemistry B 109.28 (2005): 13590-13596.

Laforgue, Alexis, Tania Addou, and Daniel Belanger. “Characterization of the deposition of organic molecules at the surface of gold by the electrochemical reduction of aryldiazonium cations.” Langmuir 21.15 (2005): 6855-6865.

Su, Xiao-Li, and Yanbin Li. “A QCM immunosensor for Salmonella detection with simultaneous measurements of resonant frequency and motional resistance.” Biosensors and Bioelectronics 21.6 (2005): 840-848.
[Keywords: Quartz crystal microbalance, Immunosensor, Salmonella Typhimurium, Resonant frequency, Motional resistance]

Ding, Yanjun, et al. “Enzyme-catalyzed amplified immunoassay for the detection of Toxoplasma gondii-specific IgG using Faradaic impedance spectroscopy, CV and QCM.” Analytical and bioanalytical chemistry 382.7 (2005): 1491-1499.
[Keywords: Toxoplasma gondii-specific IgG, Amplification strategy, Faradaic impedance spectroscopy, Cyclic voltammetry, Quartz crystal microbalance]

Wang, Hua, et al. “Nanogold particle-enhanced oriented adsorption of antibody fragments for immunosensing platforms.” BBiosensors and Bioelectronics 20.11 (2005): 2210-2217.
[Keywords: Nanogold particles, Antibody fragments, Immunosensing platforms, Quartz crystal microbalance Thermodynamic study]

Lee, Chien-Liang, et al. “Synthesis of hydrophilic and hydrophobic Pd nanoparticles with in situ generated reducing agent and their application as activator for electroless copper and nickel depositions.” Journal of the Electrochemical Society 152.8 (2005): C520.

Yin, Fan, et al. “Human serum albumin-octadecylamine Langmuir-Blodgett film formed by spreading human serum albumin solution directly on subphase’s interface covered with a layer of octadecylamine.” Thin Solid Films 488.1-2 (2005): 223-229.
[Keywords: Langmuir-Blodgett films, Biomaterials, Atomic force microscopy]

Ock, Jin-Young, et al. “Study on the electrochemical behavior of the viologen monolayers by different chemical structure.” Colloids and Surfaces A: Physicochemical and Engineering Aspects 257 (2005): 351-355.
[Keywords: Viologen, Self-assembly, Cyclic voltammetry, Quartz crystal microbalance]

Deng, Ting, et al. “Piezoelectric immunoassay for complement C4 based on a Nafion-modified interface for antibody immobilization.” Journal of immunological methods 299.1-2 (2005): 1-8.
[Keywords: Piezoelectric immunosensor, Complement C4, Nafion, Simple immobilization procedure]

Park, Sang-Hyun, Dong-Yun Lee, and Young-Soo Kwon. “Study on Charge Transfer Characteristics of Self-Assembled Viologen Monolayers.” KIEE International Transactions on Electrophysics and Applications 5.4 (2005): 161-164.
[Keywords: viologen, quartz crystal microbalance(QCM), frequency shift, cyclic voltammetry]

Deng, Ting, et al. “A novel biosensing interfacial design based on the assembled multilayers of the oppositely charged polyelectrolytes.” Analytica chimica acta 532.2 (2005): 137-144.
[Keywords: Mercaptoacetic acid (MAA), Polyelectrolytes, Immunoassay, Multilayers]


Su, Xiao-Li, and Yanbin Li. “An automatic quartz crystal microbalance immunosensor system for salmonella detection.” 2004 ASAE Annual Meeting. American Society of Agricultural and Biological Engineers, 2004.
[Keywords: Quartz crystal microbalance, immunosensor, Salmonella Typhimurium]

Minunni, Maria, et al. “Detection of highly repeated sequences in non-amplified genomic DNA by bulk acoustic wave(BAW) affinity biosensor.” Analytica chimica acta 526.1 (2004): 19-25.
[Keywords: Bulk acoustic wave, Polymerase chain reaction, Genomic DNA, Bos taurus]


OCK, JY, et al. “Quartz Crystal Microbalance.” AsiaNano 2002: Proceedings of the Asian Symposium on Nanotechnology and Nanoscience 2002. World Scientific, 2003.

Xiong, Wei. Electrochemical quartz crystal microbalance study of silver zeolite-modified electrodes. Diss. 2003.

Tomandl, Alexander. Electrochemical and spectroscopic in situ techniques for the investigation of the phosphating of zinc coated steel. Diss. 2003.


Ock, J. Y., et al. “The electrochemical studies on a self-assembled viologen monolayer using quartz crystal microbalance.” International Journal of Nanoscience 1.05n06 (2002): 593-596.
[Keywords: Viologen, self-assembly, quartz crystal microbalance (QCM), cyclic voltammogram (CV)]

Muramatsu, Hiroshi, Jong Kim, and Sang Chang. “Quartz-crystal sensors for biosensing and chemical analysis.” Analytical and bioanalytical chemistry 372.2 (2002): 314-321.
[Keywords: Quartz crystal, Resonance frequency, Resonant resistance, Sensor, Viscosity]