Seiko Instruments Inc.


  1. Home
  2. Products
  3. Other Products
  4. LTP1245

Loading Mechanism Low Voltage

Thermal Printer Mechanism


  • Max printing speed: 62.5mm/sec
  • Compact and light-weight
  • Paper feed knob model available
  • Straight and curved path models available
  • Operating temperature: -30°C to 70°C
  • Measuring instrument
  • Moble Printer
  • Medical equipment
Model LTP1245
*1 Use recommended thermal papers *2Excluding protrusion
Printing Method Thermal line dot printing
Number of dots/line 384
Resolution(dots/mm) 8
Paper width(mm) 58+0-1
Printing width(mm) 48
Speed(mm/sec)max 62.5
Paper path Curved / Straight
Detection Head temperature By thermistor
Head-up detection By photo interrupter
Out of Paper By photo interrupter
Power supply(V) Operation voltage(Vdd) 4.5 to 5.5
Operation voltage(Vp) 4.2 to 8.5
Peak current(A) Head 2.7 (8.5V / 64 dots)
Motor 0.46
Service life Pulse activation(pulse) 100million
Abrasion resistance (km) 50*1
Operating temperature (°C) -30 to 70
Dimensions(W x D x H mm) 72.0 X 39.5 X 16.0 *2
Mass(g) Approx.45
Model IF1101-01B IF1101-01BK
CPU PT110P01
Operating voltage(V) Vp:4.2 to 8.5, Vcc: 4.5 to 5.5
Character matrix(HXW dots) 16dots characters: 16X8,16X16
24dots characters: 24X12,24X24
Character type Optional font Yes Yes
Downloaded character Yes Yes
User-defined character Yes Yes
Extend graphics character set Yes Yes
Katakana character set No Yes
JIS 1&2 level kanji No Yes
Communication interface Parallel, Serial(C-MOS)
Dimensions(W x D x H mm) 70.0 X 100.0 X 11.6
Model PT110P01 PT120P02
*1 CG ROM: Japanese, Korean
Package form 128pin QFP 80pin QFP
Operating voltage(V) Vp:4.2 to 8.5, Vcc: 4.5 to 5.5
Operating frequency(MHz) 18.43 +/-0.5% 5 +/- 0.5%
Configuration C-MOS LSI
Communication interface Parallel, Serial
Character type Extended graphics character set,
Other characters is available
with CGs*1 or external RAM
Character matrix(H x W dots) 16dots characters: 16X8,16X16
24dots characters: 24X12,24X24
Dimensions(W x D x H mm) 22.0 X 16.0 X 3.1 17.2 X 17.2 X 1.7
Auto Cutter
Model ACU6205A ACU6205B
*1 Use recommended thermal papers
Cutting Method Circular type
Paper width(mm) 58+0-1
Paper thickness (μm) 54 to 75*1
Cutting type Full cut Partial cut
(Leave right side edge)
Operating time(sec/cycle)max 0.6(operating voltage 6.0V,25°C)
Cutting pitch(mm)min 10
Cut frequency(cut/min)max 30
Motor 4.2 to 6.0
Detector(control switch) 4.5 to 5.5
Starting current (A) 1.0(5V on)
Life (cut) 300,000
Dimensions(W x D x H mm) 81.9 X 54.0 X 12.0
Mass(g) Approx.50 (without support plate)